Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.4 LAccepted-AOC | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹25.6 L+₹11,700 (0.46%)Rejected-Finance A 102 GOLDEN SAND APARTMENTS GAZIPUR DHAKOLI ZIRAKPUR PB 160104 | ZIRAKPUR | S A S NAGAR | PUNJAB | 160104 | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹26.0 L+₹48,700 (1.91%)Rejected-Finance 252 GREEN CITY II BARNALA BYPASS ROAD BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹26.1 L+₹58,300 (2.29%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹26.3 L+₹78,945 (3.10%)Rejected-Finance NA | L-5 | Rejected-Finance L-5 |
Tender Value
₹25.5 L
EMD Value
₹51,000
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE (AF) Bhisiana
HQ CWE (AF) Bhisiana
REPAIR TO ROADS AT NANDINI COMPLEX AND OTHER CERTAIN DOMESTIC AREA UNDER AGE B/R-I AT AF STATION BHISIANA
2024_MES_643504_1
CWE(BHI)/BHI-74/2023-24
Open Tender
Civil Works
Item Rate
183 days
Bhisiana
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Bhisiana
₹51,000
Yes
28 Mar 2024
21 Feb 2024
13 Mar 2024
21 Feb 2024
11 Mar 2024
6 Mar 2024
Amount
Material and labour for preparing of existing black top surface by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags and air compressor to remove all loose dirt etc from black top surface. Applying evenly a premix /tack coat with bitumen grade VG-10 @ 5.0 Kg per Ten Sqm including taking out of old cat eyes complete all as specified and directed by Engineer-in-Charge. Note :- This item shall be used only where BM is in patches and to be covered by top layer after 48 hours.
Repairs to pot holes any depth not exceeding 1.00 Sqm each including sweeping, free from dust and mud or water, scouring sunken surfaces in roads, path etc cutting edges at least 25 mm depth and making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by Engineer-in-Charge. Note :- Pot holes shall be marked by Engineer-in-charge before commencement of work and same shall be entered in MB after making good and before laying of bituminous premix carpet.
Material and labour for Premix Bituminous macadam of consolidated thickness n. exc. 50mm, using paving bitumen binder of grade VG-30 @ and binder content of 4% by weight of total mix with mixing of aggregates and VG-30 bitumen in electronic operated100-120 TPH batch type hot mix plant, transporting the hot mix from plant to work site by tippers and laying with hydrostatic paver finisher (Paver shall not be compulsory in case of patch work using B.M.) and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 504 MoRTH (5th Rev) specification and complete all as specified and directed by Engineer-in-Charge. Note :- 1. The contractor shall quote the rate against item considering 4% VG-30 bitumen content. Job Mix Formula as per CI. No. 505.3.3 of MORTH (5th Rev) for BM shall be worked out for obtaining optimum binder content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the accepting officer for approval. Any variation in binder content on minus side shall be adjusted @ 42/kg of binder and no adjustment shall be made on plus side. 2. The BM shall be covered with top layer/wearing course within in a maximum of 48 hours. If there is to be any delay, by the contractor the surface shall be applied with bitumen grade VG 10 @ 5.0 Kg per Ten Sqm as required vide Clause 512 of MORTH (5th Rev) before opening to the traffic and the same shall be considered incidental to the work and shall not be paid for separately. 3. Only packed paving bitumen VG-30 shall be used and same shall also be verified by GE on ground before start of execution of work.
Material and labour for Premix Bituminous concrete 30mm consolidated thickness with 5.5% binder (paving bitumen of grade VG-30) content by weight of total mix and crushed aggregates of grading 2 with mixing of agrgregates and VG-30 bitumen in electronic operated100-120 TPH batch type hot mix plant, transporting the hot mix from the plant to work site by tippers and laying with hyrdostatic paver finisher and as per approved mix and rolled & compacted to required camber and gradient with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MORTH (5th Rev) specification and complete all as specified and directed by Engineer-in-Charge. NOTES : 1. The contractor shall quotes the rate against Item considering 5.5% VG-30 bitumen content. Job Mix Formula as per CIause. No. 505.3.3 of MORTH (5th Rev) for BC shall be worked out for obtaining Optimum Binder Content (OBC) by the Contractor without any financial effect to the Dept and same be submitted to the GE for approval. Any variation in binder content on minus side shall be adjusted @ Rs 42/kg of binder and no adjustment shall be made on plus side. 2. Cost of filler i.e. cement (Ordinary portland cement/OPC) is deemed to be included in quoted unit rate. 3. After spreading of mix as per clause 507.4.7 entire surface during the operation shall be rolled with road roller 8-10 tonne (smooth wheeled) followed with vibratory road roller of 8-10 tonne static weight, followed by finished rolling with 6 to 8 tonne smooth wheel tendom roller as per Clause Nos. 507.4.8 and cost of the same is deemed to be included in quoted unit rate.
Material and labour for marking strips, straight line, Zebra crossing and stop line not less than 2.5mm thick with hot applied thermoplastic road marking paint of white or yellow colour by using automatic mechanical road painting machine and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips on road surfaces complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of road cat eye 100X100x20mm meeting with ASTM and MoR&TH standards with yellow reflector yellow body colour and two side lens complete all as specified. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per manufacturers recommendation complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of solar cat eye aluminium alloy shall of size 125mmx125mmx25mm (shank 65 mm ) of high efficiency mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2 V/1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instruction etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Road convex mirror of size 600mm fixed with stainless steel pole of size 50mm dia with grouting in PCC 1:2:4 type B-2 of 300 x 300 x 300mm in base of minimum height 1.75m complete all as specified and directed by Engineer-in-Charge.
Dismantling of bricks (laid flat or on edge) or bricks tiles in floor, bedded and pointed in any mortar etc of any description complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness, complete all as specified and directed.
Material and labour for 100 mm thick, PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in a sub base of floors/path complete all as specified and directed by Engineer-in-Charge.
Material and labour for Machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment complete all as specified and directed by Engineer-in-Charge.
Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge.
Material and labour for Factory made moulded pre-cast cement concrete type B-1, 1:2:4 (20mm graded aggregate) in kerb stone with plain fair faces, including chamfers, weathering throating etc and setting in cement mortar 1:4 complete with joints to match including necessary excavation embedding in the ground to depth indicated and tamping ground around and also for removing any surplus spoil to a distance n exc 50 mtrs complete all as specified and directed by Engineer-in-Charge.
AP BUILDERS
M/s Azure Infrastructure Construction Co.
R K GOYAL AND CO
P K BANSAL CONTRACTOR
Singla Enterprises
Lovneesh Jindal Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .