Tiruppur City Municipal Corporation Partition Work for New AO Room and Maintenance and Repairer work at M S Nagar Community Hall and Nanjappa Nagar NUHM Center Zone II

Supplying and fixing in position of Aluminium anodised partition with 62x38x2mm extruded box section at bottom, vertical and horizontal members. The vertical members are spaced at 90cm c/c and to horizontal members are spaced at 1.20m, 2.10m and 2.40m height and the bottom panels should be covered with 12mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick clear glass with necessary glassing clips, rubber beadings etc., including cost of labour for electrical consumption required for the fabrication, drilling holes in RCC columns with power drill to the required extent and make good to the original condition etc., complete and as directed by the departmental officers. The aluminium for frame to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns.

Adjustable Inverter Split AC 1.5 ton 3 Star Venus Luxe Inverter Split AC (6 step Adjustable Mode, 4 way swing, Ice wash Technology, Anti Dust Filter with Anti Microbial coating, 183V Venus Luxe, White) With Wiring , Labar Charges & Loading Unloading Including.

MODULAR SWITCHES & SOCKETS - HIGHER END

6A Switch 1W - 1 Module

16A Switch 1W - 1 Module

5 Amps 3 Pin Top

6/16A Socket - 2 Module

UPVC - Column pipe {WD-M0048} 25mm

PVC INSULATED SINGLE CORE MULTI STRAND FIRE RETARDANT LOW SMOKE (FRLS) FLEXIBLE COPPER CABLE WITH ISI MARK CONFORMING TO IS

Supply and fixing of 20W 4 Feet LED Fitting with Higher End etc., Complete Complying with Standard Specification. (M-1273)

Supply and run of 4 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD-67)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End (SD - 508)

Supply and fixing 32 mm., dia G.I Pipe 3.0 Meter length with 3 Nos., of bend and 1 no., of coupling on the wall using M.S., Hooks and Clamps with necessary civil work etc., complete.,

supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD - 447)

Aashirwad Three (3) Seater Chair Stainless Steel Waiting Area Visitor Reception Chair

Please Enable Macros to View BoQ information