SPECIAL REPAIR TO OFFRS MD ACCN (BLDG NO P- 5/1-2) (NO OF DUS - 02) AT GWALIOR ROAD UNDER GE(WEST) AGRA

Amount

Dismantling brick tiles in roof top laid bedded & pointed in any mortar and removing from site complete all as specified and directed by Engr-in-Charge.

Demolition of mud or existing roof treatment of, any thickness, including plastering and leaping and tiling of any description whether part removal or full or complete all as specified and directed by Engr-in-Charge. .

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) in padding/levelling courses, roof kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed by Engr-in-Charge.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed by Engr-in-Charge.

M & L for three coats of Roof water proofing solution smartcare damp proof ultra an innovative fibre reinforced which provide the ultimate water proofing cover of 2.32 Sqm/Ltr with 10 years of water proofing warranty and 12 degree celsius of surface temperature reduction complete all as specified and directed by Engr-in-Charge.

M&L for Cement concrete 1:2:4 type B-1 ( using 20mm graded crushed stone aggregate) as in benching,coping , roof kerbs, mud stop, padding etc and similar work complete all as specified and directed by Engr-in-Charge.

M&L One coat of epoxy resin (FAIR BOND EP) on old concrete surface @ 0.30 kg/Sqm including preparation of surface as per manufacturer's instruction and applying 25 mm thick on ceiling, beams, chajjas & facia surface etc (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free sprey concrete plasticiser (spray crete) as per manufacturer's instruction with guniting machine of pressure capacity not less than 5kg per Sqm and finished the surface even & smooth with 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 12 shall be reused after cleaning.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 ccomplete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 3% by weight of cement finished other than fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M&Lwashed stone grit plaster on exterior walls in two layers under layer 12 mm thick cement plaster 1:4 with WPC and providing groves and WPC furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2 ( 1 cement 1/2 coarse sand :2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified (payment for providing grooves shall be made separately).

Supply only integral water proofing compound liquid admixture for cement motar complete all as specified and directed by Engr-in-Charge

M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girthplaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair tothe edges of panes and finishing the groove complete as per specifications and of the Engineer -in -charge.

M & L for rendering 10mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed by Engr-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. .

M & L for Preparing newly plastered or un plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for Preparing old plastered or un plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on ceiling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed by Engr-in-Charge. .

M&L for complete removal of extg treatment with mechanical device of old plastered surfaces of ceiling and applying two coat of white wash (match with new surface) complete all as specified and directed by Engr-in-Charge. .

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. .

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge. .

M&L for vertified ceramic tiles any shade 10 mm thick (square/rectangular) area of each tile exc 0.42 Sqm but not exc. 1.00 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engr-in-Charge. .(toilet,bath,kitchen, passage floor)

M&L for vertified ceramic tiles any shade 10 mm thick (square/rectangular) area of each tile exc 0.42 Sqm but not exc. 1.00 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-Charge. .(toilet,bath,kitchen, passage floor)

M&L non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exc. 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M&L Pre-polished Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, nosing and rounding edges of stone slab one edgeand including 20mm thick screed bed CM (1:6) complete all as specified and directed by Engr-in-Charge.

M&L Pre-polished Machine cut kota stone 18-20 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing, nosing and rounding edges of stone slab one edge and including 15mm thick rendering CM (1:4) complete all as specified and directed by Engr-in-Charge. .

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in marble in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like in CM (1:4) incl pointing in white cement (1:2) match the shade of the slab using marble dust with admixture of pigment to match with shade of granite including rubbing, nosing and rounding edges of stone slab one edge over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. .

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed by Engr-in-Charge. .

Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed by Engr-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed by Engr-in-Charge. .

M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed by Engr-in-Charge. .

S&F for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including fixing with 100mm long stainless steel butt hinges -04Nos with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge. .

S&F 30 mm thickFactory made solid panel PVC wire gauzed door shutter 30 mm thick i.e. panel will be of wire gauze of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm used beading of exposed portion of PVC sheet beading channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing including fixing with 100mm long stainless steel butt hinges -04Nos ccomplete all as specified and directed by Engr-in-Charge. .

S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. .

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge. .

S&F 150 mm long aluminium alloy handles, fabrcomplete all as specified and directed by Engr-in-Charge. complete all as specified and directed.

S&F 100 mm long SS Butt hinges complete all as specified and directed by Engineer -in-Charge.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 149 of SSR 2020 (Part-II)

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet instead of plain colour PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed by Engr-in-Charge. .

S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. .

S&F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. .

S&F 125 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M & L for second class hardwood plain fillets exc 13Sqcm and n exc 25 Sqcm, suare, rectangular in section clean sawn secured with nails for cubboard frame work complete all as specified and directed by Engr-in-Charge.

S & F for factory made 18 mm thick solid WPC (Wood polymer Composite) Laminated board of required size for cup board shelf fixed with screws to timber frame/welding to steel frame work complete all as specified and directed by Engr-in-Charge.

S & F for SS Continuous (piano) hinges,bright finish or electrogalvanised. (40mm Width of flaps when open) complete all as specified and directed by Engr-in-Charge. .

S&F 100 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge. .

S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as specified and directed by Engr-in-Charge. .

S & F 20mm dia stainless steel pipe for cupboard complete all as specified and directed by Engr-in-Charge.

S & F 20mm stainless steel bracket complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel drapery rods, 25mm internal diameter including decoratine type brackets including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed by Engr-in-Charge.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, alusters, nosing to steps ncluding embeding in concrete and screwing etc. wind ties for roof including securing oltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S & F factory made uPVC white colour three track three panels sliding window with fly proof SS wire mesh(Two nos glazed & one no wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 (+ or -) 2mm and single glazing bead/double glazing beads of appropriate dimension. (area of window above 1.75Sqm ) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved quality complete all as specified and directed.

S & F factory made uPVC white colour casement window single panel with SS friction hinges (300 x 19 x 19mm), made of (small series ) frame 47 x 50mm & sash 47 x 68mm both having wall thickness of 1.9 (+ or -) 2mm and single glass pane glazing beads of appropriate dimension. (area of window upto0.75Sqm) comprising of uPVC multichambered frame, sash and mullion( where ever required) extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beadsand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved quality, complete all as specified and directed.

S & F Stainless steel wire cloth, 0.71 mm nominal dia of wire fixed with tinned tacks, of 20mm mesh of stainless steel wire staples complete all as specified and directed

S&F 5.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M & L for applying one coats of synthetic enamel paint including preparation of old steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed.

PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection (75 mm thick) laying in alternate ways finished even and smooth without using extra cement all as specified.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed..

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed.

M&L RCC Type B0 1:2:4 Type using (12.5mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and beams etc. complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping rough finished surfaces of concrete flat etc. complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces of concrete. complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 85 above but 20mm bore

Supplying and laying 20 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 25 mm outer diameter of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20 mm outer diameter of CPVC brass elbow fixing to CPVC pipes any location complete all as specified.

S & F 20 mm outer diameter of CPVC brass tee fixing to CPVC pipes any location complete all as specified.

S & F 25 mm outer diameter of CPVC brass elbow fixing to CPVC pipes any location complete all as specified.

S & F 25 mm outer diameter of CPVC brass tee fixing to CPVC pipes any location complete all as specified.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap incl seat and cover (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back size 550 x 400mm incl waste pipe chain plug brackets complete all as specified and directed. .

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F in repair CP jet Spray heavy duty with PVC connection complete all as specified and directed.

S&F in repair CP health faucet ABS body with wall hook and 1 mtr stainless steel braided rubber hose complete all as specified and directed.

S & F in 15 mm bore brass chromium plated mixer hot & cold water screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore, brass chromium plated basin mixer screwed down high pressure with or without lettered Hot ot Cold with long screwed and fly nuts screwed for pipe and fixed complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm bore CP two way angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm bore CP concealed Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair soap dish brass chromium plated of approximate size 100mmx80mm complete all as specified and directed.

S&F in repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) of 32mm bore suitable for wash hand basin complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers incl bedding in CM 1:4 to dwarf wall or including cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm etc complete all as specified and directed.

S&F in repair 32mm CP Waste coupling (half or full threaded) in suitable for Sink complete all as specified and directed.

S&F 32 mm dia PVC flexible waste pipe 800mm long etc. complete all as specified and directed.

S&F in repair mirror cabinet PTMT size 350 x 445mm fixed with screws complete all as specified and directed.

S&F plate rack of 1mm thick stainless steel of size 750 x 900 x 230mm with three shelves fixed to wall complete all as specified and directed.

S & F in repair tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repairs CP shower rose 125mm dia alongwith shower arm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair 150 mm square PTMT grating with openable flap (Min weight 100 gms) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 75 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed.

S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.

S&F in 110 mm bore PVC (SWR) single Y with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed.

S&F in repair 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed top) hoisted and fixed in position incl dismantling of water tank complete all as specified & directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S & F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

M&L for treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 to match the existing floors.

M & L (Brushbond RFX) Elastomeric polymer modiffied cemtentitious waterproofing coating used for waterproofing of extg and new maked bricks surface complete all as specified and directed.

M & L Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) in CM 1:4 built in cement mortar complete all as spd and dir

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and applying a coat of cement slurry with 3.00 kg of cement per sqm and rendering 15mm thick in CM 1:3 using WPC finished rough (Sunken floor/Wall) and then applying two course treatment as follow:- (i) Applying bitumen primer @ 0.40 Kg/Sqm. (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 kg/Sqm with 100 GSM/Sqm non woven polyster mat as centre core reinforcement , laid with 75mm side over lap and 100mm end over lap sealed and finsihed neat. (iii) 40mm bore GI pipe for Spout pipe length 0.75m.

M & L for broken bricks loose filling with aggregates of gauge 40 to 80mm in sunken protion complete all as spd and dir by Engr-in-charge.

S & F in repairs 75x125mm dia of PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

Boring holes through cooking platform lining for pipes ,etc n'exc 50mm dia and making good complete all as spd and dir by Engr-in-charge.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, manholes, etc n.exc 10 Sqm plan and getting out in soft/loose soil ccomplete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore of pipe

M&L for 150 mm dia SGSW drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed by Engr-in-Charge. .

M&L for demolition of reinforced cement concrete of any description and in any position complete all as specified and directed by Engr-in-Charge.

M&L for providing pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed by Engr-in-Charge. . (Note :- Reinforcement shall be measured and paid separately)

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base of floor/path/paving finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Providing Acrylic plastic number plate of size 200mmX 200mm X 3mm and writing Qtr No. of height 10 to 15 cm in any style (bold/italic) and fixed to wall with screws complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and Including rigid PVC conduit medium grade, concealed on wall portion and on steel structural truss/ RCC roof ceiling portion surface type fixed with saddles, screws as per Engr practices of suitable size but not less than 20 mm bore with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodized steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified and directed by Engr-in-Charge.

All as per item No-2 here in before but one light point controlled by two Nos 2 way switches complete all as specified and directed by Engr-in-Charge.

All as per item No-2 here in before but One socket outlet 5/6 Amps on independent board but not below the switch board controlled by one switch complete all as specified and directed by Engr-in-Charge.

All as per item No-2 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified and directed by Engr-in-Charge.

All as per item No-2 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by one 1way switch on independent board but below the switch board of light points complete all as specified and directed by Engr-in-Charge.

All as per item No-2 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper conductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 2 to 7 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at RCC Columns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelite laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light fiittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.

S & F switch piano, flush type single pole, two way 5 Amp 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed.

S&F switch, bell push button, single pole, 5/6 Amps, one way, 230 Volts complete all as specified and directed.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 230 Volts complete all as specified & directed.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed by Engr-in-Charge. .

Supply & fix rotary stepped type electronic fan regulator mini flush type 230 Volts complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified and directed by Engr-in-Charge. .

Supply & fix commissioning and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white poly carbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single poly carbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed by Engr-in-Charge. .

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified Width : 60cm, Suction Power : 1095 m3/hr, Function Type : Auto clean, 6 way suction, Filter type: 3 layer Baffle filter, Finish :aligator Black Tampered Glass. Control:Touch With Backlit , Led : 2x1.1W LED, Warranty: 12 Years on motor, Product Dimension (WxDxH) (In mm) 600x500x560mm, 3 in 1 chimney: air purifier,chimney and coolong fan,complete all as specified and directed by Engr-in-Charge. .

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement surface/wall mounting LED batten 20 watt luminaire, twin glow ( warm white + cool day light) having extruded aluminium housing provided for efficient heat dissipation with poly carbonate diffuser and integrated electronic driver with mounting accessories, complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge. .

S&F in replacement Mirror light Decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with Minimum 8 Watt & Maximum 15 Watt LED warm white in colour with a nominal system output of 120 lum/watt(min) with PF not less than 0.9 complete all as specified and directed by Engr-in-Charge. .

Supply and fixing in replacement LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, ultra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified and directed by Engr-in-Charge. .

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified and directed by Engr-in-Charge. .

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Note:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length complete all as specified and directed by Engr-in-Charge. .

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Note:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length complete all as specified and directed by Engr-in-Charge. .

Taking down distribution boards of any size any type including MCB TPN/DB/SPN/SP etc and making good the disturbed surfaces complete all as specified and directed by Engr-in-Charge. .

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable management suitable for housing MCCB TPN 415 Volts as incomer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mounting type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate complete all as specified and directed by Engr-in-Charge. .

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 12 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed by Engr-in-Charge. .

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 4 way with 200 amps rated bus bar 240 volts complete all as specified and directed by Engr-in-Charge. .

S&F in replacement MCCB of rating 100 Amp, 4 pole, 415 V, AC fixed type with breaking capacity 25 KA DPX³ 160 type, as per ICE- 60947-1 Ics 100% of Icu, Adjustable tripping: 0 - 0.3 - 1 - 3s with adjustable 70% to 100% and thermal magnetic release to be fixed in existing LT panel for taking In coming electric connection for VTPN DB complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 40 to 63A rating in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply & fix MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, of capacity 25 Ltrs vertical storage type, outer body of the heater is made with tough ABS material with special inner tank coating that prevents corrosion and rusting and results in a long tank life energy-efficient and Heating Element upto 2 KW (copper tube)-Spiral Type Multiple safety systems for protection against dry heating, overheating and overpressure, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece (hot & cold of length upto 450 mm long with to be fixed on wall with fastener mild steel 100 mm long x 10 mm dia with expansion type split pin and bolts complete for hanging of geyser complete all as specified and directed by Engr-in-Charge.

S&F iron metal body heavy duty exhaust fan 250mm sweep, double ball bearing, copper wound, with louvers, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm stranded copper conductor 3 core flexible cable cord complete all as specified and directed.

Supply and fix PVC body fresh air circulator of size 225 mm sweep, with PVC louvers, operated at 230 Volts 50 Hz, 1350 to 1400 RPM with 3 core flexible copper conductor cable cord of size 0.75 Sqmm from fan to ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fix ceiling fan, 1200mm sweep, minimum 210 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor) type complete with standard accessories i.e (three blade, 02 Nos canopy, electronic type modular fan regulator 90 to 100 W, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc), double ball bearing, copper wound with synchronous motor, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm stranded copper conductor 3 core flexible cable cord complete all as specified and directed.

M & L in repair earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanized steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Loose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

M&L for electrically disconnecting and taking down existing ceiling fans from any height or in any position from existing bldg and keeping in safe custody and submit it to the subdivision for reuse and necessary repair/ servicing & painting with one coat of synthetic enable paint as specified and directed by Engr-in-charge.

Supply & Laying In replacement, testing ,cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 50 Sqmm 3½ core complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed by Engr-in-Charge. .

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.

Supply and fixing in replacement GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittingscomplete all as specified and directed by Engr-in-Charge. ,.

S & F in replacement galvanized iron tubes, medium grade of size 40 mm bore fixed to wall, ceiling and laid under floor complete all as specified and directed by Engr-in-Charge. .

S & F in replacement galvanized iron tubes, medium grade of size 20 mm bore fixed to wall, ceiling and laid under floor complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement gun metal gate valve of size 20mm bore with iron wheel head screwed both ends for iron pipe and fixed of following sizes complete all as specified and directed by Engr-in-Charge.

M&L for rigid non metallic PVC conduit (medium quality ISI marked) 2 mm thick exclusive of boxes (junction/ terminal) 25 mm dia (external) for telephone & TV cable wiring but inclusive of all fittings such as tees, bends, reducers, bell mouth, tube ends and concealed to wall/ roof/ floor complete all as specified and directed by Engr-in-Charge.

Supply and fix drawn 2 pair conductor of size 0.5 Sqmm copper PVC insulated and over all screened with tinned copper net and PVC insulated complete all as specified and directed by Engr-in-Charge. (For Telephone)

Supply and fix dish TV cable cord of size 1.5 Sqmm solid copper conductor triple insulated steel wire mess inner sheathing earth continuity conductor and over all PVC sheathed circular complete all as specified and directed by Engr-in-Charge.

Supply & Fix Cable telephone outlet socket switch type flush mounted RJ-11 including modular cover plate and metal flush box complete all as specified and directed by Engr-in-Charge. .

Supply & Fix Cable TV outlet socket switch type flush mounted including modular cover plate and metal flush box suitable for TV cable cord connection complete all as specified and directed by Engr-in-Charge.

M&L for Electric circuits for size of 1.5 sqmm copper FRLS wire for inverter in existing conduit complete all as specified and directed by Engr-in-Charge.

Supply and fix water proof plastic box 1 module/ 3 module with switch or/and socket use in outdoor lighting/Garden etc. for 6A switch complete all as specified and directed by Engr-in-Charge. .

M/s Navansh Engineers & Consultants (BID ID -3141389)

ASHISH SHARMA (BID ID -3140779)

M/s S. K. Construction Co. (BID ID -3140789)

M/S DEVENDRA KUMAR GUPTA (BID ID -3141023)

M/s Srijan Construction Company (BID ID -3141139)

Afghani Constructions (BID ID -3140545)

M/s Kok Singh Sisodia (BID ID -3140513)