IIT Bhubaneswar

S.No. Description of item Unit DSR Amount MR Amount

4 LTC Corridor

5 LTC External development

Boys Hostel External development

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.07.11

IIT Bhubaneswar

NBCC (INDIA) LIMITED

(A Govt. of India Enterprise)

NAME OF WORK -Carrying out Part work of Various buildings of Phase-1(b) under risk and cost of previous agency at

IIT Bhubaneswar, Argul Campus

ABSTRACT OF BOQs

Sr. No Sub Head Unit DSR-Amount NON DSR-Amount

C ELETRICAL (Internal) Rs. 3,125,295.17 63,975,434.96

D FIRE FIGHTING Rs. 25,312,566.82 7,371,869.42

G PRESENTATION & UNIFIED CONFERENCING Rs. - 113,074,896.03

LECTURE THEATRE IIT Bhubaneswar

NBCC (INDIA) LIMITED

(A Govt. of India Enterprise)

BOQ for Construction of Lecture Theater for IIT Bhubaneswar at Argul, Khurda, Odisha

DSR- DSR- NON DSR- TOTAL NON DSR-

Sr. No Sub Head Unit NON DSR-Amount DSR-Amount NON DSR-Amount NON DSR-Amount DSR-Amount NON DSR-Amount DSR-Amount TOTAL DSR-Amount

Amount Amount Amount Amount

Block-1 Block-2 Block-3 Corridor External Devlopment Total for Block -1, 2 & 3

GST / Service tax shall be extra as applicable 525,478,583.47

LECTURE THEATRE IIT Bhubaneswar

NBCC (INDIA) LIMITED

(A Govt. of India Enterprise)

BOQ for Construction of Lecture Theater Complex-2 for IIT Bhubaneswar at Argul, Khurda,

Sr. No Sub Head Unit DSR-Amount NON DSR-Amount

C ELETRICAL (Internal) Rs. 2,067,090.03 33,936,953.62

D FIRE FIGHTING Rs. - 949,619.97

PRESENTATION & UNIFIED

LECTURE THEATER BLOCK-2-CIVIL IIT Bhubaneswar

NBCC (I) LIMITED

A GOVERNMENT OF INDIA ENTERPRISE

NAME OF WORKS -CIVIL WORKS FOR IIT BHUBANESWAR,ODISHA

Summary (LECTURE THEATRE BLOCK-2)

Sno Sub Head Unit DSR-Amount NON DSR-Amount

1 SUBHEAD I-EARTH WORK Rs. 6,321,348.02 390,532.21

2 SUB HEAD II- CONCRETE WORK Rs. 3,824,094.89 -

3 SUB HEAD III- R.C.C WORK Rs. 20,118,781.15 -

4 SUB HEAD IV- BRICK WORK Rs. 11,566,269.01 -

5 SUB HEAD V- STEEL WORK Rs. 16,356,925.23 -

6 SUB HEAD VI- FLOORING WORK Rs. 61,222,603.65 35,202.97

7 SUB HEAD VII- FINISHING WORK Rs. 10,773,297.32 -

8 SUB HEAD-VIII- ALUMINIUM WORK Rs. 7,714,376.28 -

9 SUB HEAD IX- WATERPROOFING WORK Rs. 2,752,637.37 -

10 SUB HEAD X - WOOD WORK Rs. 1,056,913.71 -

11 SUB HEAD - XI-FALSE CEILING Rs. 11,024,499.84 -

SUB HEAD - X1II-GLAZING AND ALUMINIUM

12 COMPOSIT PANAL WORKS

13 SUB HEAD-XII FIRE RESISTANT DOOR Rs. 1,453,465.58 -

14 SUB HEAD-XIII-WALL LINING WORKS Rs. 8,144,746.24 -

15 SUB HEAD XIV -MISCELLANEOUS WORKS Rs. - -

16 SUB HEAD-XV NON SCHEDULE ITEMS Rs. - 30,462,444.36

GRAND TOTAL (DSR+NON DSR) Rs. 206,692,180.32

GRAND TOTAL (DSR+NON DSR) Rs. 206,692,180.32

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

NBCC (I) LIMITED

A GOVERNMENT OF INDIA ENTERPRISE

NAME OF WORKS -CIVIL WORKS FOR IIT BHUBANESWAR,ODISHA

SCHEDULE OF QUANTITIES LECTURE THEATER BLOCK-2

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

SUBHEAD I-EARTH WORK

Carriage of material by mechanical transport including loading,

unloading and stacking

Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means over areas (exceeding 30cm in depth. 1.5m in width

2 2.6 as well as 10 sqm on plan) including disposal of excavated earth, lead

upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly

Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means over areas (exceeding 30 cm in depth, 1.5m in width

3 2.7 as well as 10 sqm on plan) including disposal of excavated earth, lead

upto 50 m and lift upto 1.5 m, disposed earth to be levelled and

neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means in foundation trenches or drains (not exceeding 1.5

m in width or 10 sqm on plan) including dressing of sides and

ramming of bottoms, lift up to 1.5 m, including getting out the

excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

Excavation work by mechanical means (Hydraulic excavator)/ manual

means in foundation trenches or drains not exceeding 1.5m in width

or 10 sqm on plan including dressing of sides and ramming of

bottoms, lift up to 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soils as directed, within a lead of 50m.

1 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms,

depth up to 1.5 m including getting out the excavated soil, and then

6 2.10 returning the soil as required, inlayers not exceeding 20 cm in depth,

including consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as directed, within a lead

2.10.1 All kinds of soil

2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. Mtr 475.00 475.00 134.14 63716.37

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

exceeding 80 mm dia. but not exceeding 300 mm dia.

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

Extra for excavating trenches for pipes, cables etc. in all kinds of soil

for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over

corresponding basic item for depth up to 1.5 metre).

a Pipes, cables etc, not exceeding 80 mm dia. Mtr 375.00 375.00 182.43 68411.26

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

b exceeding 80 mm dia. but not exceeding 300 mm dia. Mtr 305.00 305.00 297.69 90795.56

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

Extra for excavating trenches for pipes, cables, etc, in all kinds of soil

for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is

over corresponding basic item for depth up to 1.5 metre.)

a Pipes, cables etc, not exceeding 80 mm dia. Mtr 395.00 395.00 468.15 184918.32

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

exceeding 80 mm dia. but not exceeding 300 mm dia.

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

Excavating trenches of required width for pipes, cables, etc, including

excavation for sockets, depth up to 1.5 m including getting out the

excavated materials, returning the soil as required in layers not

9 2.13 exceeding 20 cm in depth, including consolidating each deposited

layers by ramming, watering etc., stacking serviceable material for

measurements and disposal of unserviceable material as directed,

within a lead of 50m :

2.13.1 Ordinary rock :

2.13.1.1 Pipes, cables etc, not exceeding 80 mm dia. Mtr 305.00 305.00 191.10 58284.05

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

exceeding 80 mm dia. but not exceeding 300 mm dia.

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

2 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Extra for excavating trenches for pipes, cables, etc. in ordinary/hard

rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over

corresponding basic item for depth up to 1.5 metre.)

a Pipes, cables etc, not exceeding 80 mm dia. Mtr 205.00 205.00 202.56 41525.00

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

b exceeding 80 mm dia. but not exceeding 300 mm dia. Mtr 185.00 185.00 501.58 92793.20

c Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. Mtr 165.00 165.00 577.16 95231.78

Extra for excavating trenches for pipes, cables, etc. in ordinary/hard

rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over

corresponding basic item for depth up to 1.5 metre.)

a Pipes, cables etc, not exceeding 80 mm dia. Mtr 180.00 180.00 504.49 90808.46

Pipes, cables etc, not exceeding 80 mm dia. Pipes, cables etc.

exceeding 80 mm dia. but not exceeding 300 mm dia.

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm.

Close timbering over areas including strutting,shoring and

12 2.18 packing,cavities (whereaver required) etc.complete. (Measurements

to be taken of the area timbered) :

2.18.1 Depth not exceeding 1.5 m. Sqm 90.00 90.00 100.99 9088.72

2.18.2 Depth not exceeding 1.5 m but not exceeding 3m. Sqm 85.00 85.00 108.29 9204.57

2.18.3 Depth not exceeding 3 m but not exceeding 4.5m. Sqm 105.00 105.00 116.12 12192.37

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidated each deposited layer by ramming and watering, lead up

to 50m and lift upto 1.5m.

Extra for every additional lift of 1.5m or part thereof in excavation/

banking excavated or stacked materials.

Supplying and filling in plinth with Jamuna sand under floors,

watering, ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and

16 2.28 inequalities not exceeding 15 cm deep and disposal of rubbish, lead

upto 50 m and lift upto 1.5 m.

2.28.1 All kinds of soil 100 sqm 10.00

Ploughing the existing ground to a depth of 15 cm to 25 cm and

watering the same.

2.29.1 All kinds of soil 100 sqm

3 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Felling trees of the girth (measured at a height of 1 m above ground

level) including cutting of trunks and branches, removing the roots

and stacking of serviceable material and disposal of unserviceable

2.33.1 Beyond 30 cm girth upto and including 60 cm girth each 8.00 8.00 206.70 1653.60

2.33.2 Beyond 60 cm girth upto and including 120 cm girth each 6.00 6.00 915.39 5492.32

2.33.3 Beyond 120 cm girth upto and including 240 cm girth each 4.00 4.00 4233.89 16935.55

Supplying chemical emulsion in sealed containers including delivery

19 2.34 as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 7120.00 7120.00 195.40 1391274.33

Diluting and injecting chemical emulsion for PRE/POST

20 CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

Along external wall where the apron is not provided using chemical

emulsion @ 7.5 litres / sqm of the vertical surface of the substructure

(i) to a depth of 300 mm including excavation channel along the wall &

rodding etc. complete:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Treatment of soil under floors using chemical emulsion @ one litre

Rate per hole, 300 mm apart including making 12 mm diameter holes and

Analysis channels etc. complete as per specification and as per the direction of

engineer-in-charge.

(i) With Chlorpyriphos/Lindane E.C. 20% with 1% concentration Sqm 4825.00 4825.00 80.08 386407.79

Treatment at points of contact of wood work by chemical emulsion

Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5litres

22 2.35.5 per hole by drilling 6 mm dia holes at downward angle of 45degree at Sqm 3312.00 3312.00 210.90 698512.68

150 mm centre to centre and sealing the same.

TOTAL FOR SUB HEAD - I 6321348.02 390532.21

SUB HEAD II- CONCRETE WORK

Providing and laying in position cement concrete of specified grade

1 4.1 excluding the cost of centering and shuttering - All work up to plinth

1:2:4(1 Cement : 2 coarse sand : 4 graded stone aggregate 20mm

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm

4 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,

abutments, pillars, posts, struts, buttresses, string or lacing courses,

2 4.2 parapets, coping, bed blocks, anchor blocks, plain windowsills, fillets,

sunken floor, etc., up to floor five level, excluding the cost of

centering, shuttering and finishing :

1:2:4 (1 cement:2coarse sand:4 graded stone aggregate 20 mm

Providing and laying damp-proof course 40 mm thick with cement

3 4.10 concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate sqm 315.00 315.00 270.91 85335.56

12.5 mm nominal size).

Extra for providing and mixing water proofing material in cement

concrete work in doses by weight of cement as per manufacturer’s

Applying a coat of residual petroleum bitumen of grade of VG-10 of

approved quality using 1.7 kg per square metre on damp proof course

after cleaning the surface with brushes and finally with a piece of

cloth lightly soaked in kerosene oil.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1

coarse sand : 6 graded stone aggregate 20 mm nominal size) over

75mm thick bed of dry brick ballast 40 mm nominal size, well

rammed and consolidated and grouted with fine sand, including

finishing the top

Extra for addition of synthetic Polyester triangular fibre of length

12mm,effective diameter 10-40 microns and specific gravity of 1.34

to 1.40 in cement. concrete/RCC/Flooring/water retaining

7 4.18 structures by using Per Bag of 125gms of synthetic Polyester 1390.00 1390.00 55.69 77415.38

triangular fibre for 50 Kg cement used 50 Kg of as per directions of

Engineer-in-Charge.(For water retaining structures only)

TOTAL FOR SUB HEAD II 3824094.89

SUB HEAD III- R.C.C WORK

Reinforced cement concrete work in beams, suspended floors, roofs

having slope up to 15° landings, balconies, shelves, chajjas, lintels,

bands, plain window sills, staircases and spiral stair cases up to floor

1 5.3 five level excluding the cost of centering, shuttering, finishing and Cum 175.00 175.00 7122.80 1246490.65

reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size).

5 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Centering and shuttering including strutting, propping etc. and

2 5.9 removal of form for : Foundations, footings, bases of columns, etc. for

Foundations, footings, bases of columns, etc. for mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

Suspended floors, roofs, landings, balconies and access platform.

5.9.4 Shelves (Cast in situ) Sqm 20.15 20.15 422.07 8504.71

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 3343.00 500.00 476.40 238199.16

5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 130.60 46.71 415.76 19422.04

Extra for shuttering in circular work (20% of respective centering and

shuttering items).

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

c Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 1008.65 158.82 95.28 15131.84

Small lintels not exceeding 1.5m clear span, moulding as in cornices,

5.9.15 window sills, string courses, bands, copings, bed plates, anchor Sqm 265.00 265.00 206.44 54705.94

blocks and the like.

5.9.16 Edges of slabs and breaks in floors and walls.

5.9.17 Cornices and mouldings Sqm 284.00 284.00 577.12 163902.46

Small surfaces such as cantilever ends, brackets and ends of steps,

caps and bases to pilasters and columns and the like.

5.9.19 Weather shade, Chajjas, corbels etc., including edges. Sqm 250.00 134.94 517.38 69813.85

Providing and fixing tie bolt, spring coil and plastic cone in wall

shuttering complete as per the directions if engineer-in charge

20mm dia & 225 mm length

Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc. including cost of de-

4 5.11 shuttering and decentering at all levels, over a height of 3.5 m, for

every additional height of 1 metre or part thereof

(Plan area to be measured)

Suspended floors, roofs, landing, beams and balconies (Plan area to

6 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Steel reinforcement for R.C.C. work including straightening, cutting,

6 5.22 bending, placing in position and binding all complete up to plinth

5.22.6 Thermo-Mechanically Treated bars. Kg 162500.00 54236.30 71.56 3881269.27

Steel reinforcement for R.C.C. work including straightening, cutting,

5.22A bending, placing in position and binding all complete above plinth

5.22A.6 Thermo-Mechanically Treated bars. Kg 383000.00 15000.00 71.56 1073433.06

Add for plaster drip course/ groove in plastered surface or moulding

to R.C.C. projections.

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement

concrete work, using cement content as per approved design mix,

including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to

8 5.33 accelerate, retard setting of concrete, improve workability without

impairing strength and durability as per direction of Engineer-in-

charge. (Note :- Cement content considered in this item is @ 330

kg/cum.“Excess/ less cement used as per design mix is

payable/recoverable separately).

5.33.1 All works up to plinth level. cum 759.60 50.00 6616.25 330812.31

5.33.2 All works above plinth level up to floor V level. cum 3320.97 1028.33 7371.17 7579963.91

Extra for providing richer mixes at all floor levels. (Note :- Cement

content considered in this item is @ 330 kg/cum.“Excess/ less

cement used as per design mix is payable/recoverable separately).

Providing M-30 grade concrete instead of M-25 grade BMC/RMC.

5.34.1 (Note:- Cement content considered in M-30 is @340 kg/cum). cum 4080.57 1028.33 80.39 82666.69

Add for using extra cement in the items of design mix over and above

the specified cement content therein.

TOTAL FOR SUB HEAD III 20118781.15

SUB HEAD IV- BRICK WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 84.00 84.00 4915.04 412863.48

7 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars

at every third course of half brick masonry.

Brick work with clay fly ash F.P.S. (non modular) brick of class

3 6.32 designation 7.5 in superstructure above plinth level up to floor five

6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 68.50 68.50 5733.23 392725.94

Providing and laying autoclaved aerated cement blocks masonry with

100mm thick AAC blocks in super structure above plinth level up to

4 6.38 floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The cum 2051.50 1489.90 6711.66 9999682.81

rate includes providing and placing in position 2 Nos. 6 mm dia M.S.

bars at every third course of masonry work.

Half brick masonry with non modular fly ash bricks class designation

5 6.45 10, conforming to IS : 12894, in super structure above plinth and sqm 882.50 882.50 789.29 696544.83

upto floor V level.

6.45.2 Cement mortar 1:4 (1 cement :4 coarse sand)

TOTAL FOR SUB HEAD IV 11566269.01

SUB HEAD V- STEEL WORK

Structural steel work in single section, fixed with or without

connecting plate, including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer all complete.

Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all

Providing and fixing 1mm thick M.S. sheet door with frame of

40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions

3 10.5 and corners, all necessary fittings complete, including applying a

priming coat of approved steel primer.

10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. sqm 2.35 2.35 3230.12 7590.79

Providing and fixing pressed steel door frames conforming to IS:

4351 manufactured from commercial mild steel sheet of 1.60 mm

thickness including hinges, jamb, lock jamb, bead and if required

angle threshold of mild steel angle of section 50x25mm, or base ties

of 1.60 mm pressed mild steel welded or rigidly fixed together by

mechanical means, including M.S. pressed butt hinges, 2.5mm thick

with mortar guards, lock strike-plate and shock absorbers as specified

and applying a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

10.14.3 Profile E

8 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Fixing with carbon steel galvanised dash fastener of required dia and

10.14.3.2 size (to be paid for separately). Mtr 128.00 128.00 437.04 55941.68

Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position

5 10.16 and applying a priming coat of approved steel primer, including

welding and bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes Kg 95500.00 94089.13 108.13 10173992.74

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar

bent to shape with hooked ends in R.C.C. slabs, beams during laying

including painting the exposed portion of loop, all as per standard

design complete.

7 10.20 Providing and fixing bolts including nuts and washers complete. kg 4775.00 4775.00 103.25 492995.02

Steel work welded in built up sections/ framed work including cutting,

8 10.25 hoisting, fixing in position and applying a priming coat of approved

steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing carbon steel galvanised ( minimum coating 5

micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield

8 10.27 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide

PA 6 grade sleeve, including drilling of hole in frame , concrete/

masonry, etc.as per direction of Engineer-in-Charge

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc. including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

complete i/c fixing the railing with necessary accessories & stainless

9 10.28 steel dash fasteners , stainless steel bolts etc., of required size, on Kg 5028.00 5028.00 650.89 3272676.41

the top of the floor or the side of waist slab with suitable arrangement

as per approval of Engineer-in-charge.( for payment purpose only

weight of stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.)

TOTAL FOR SUB HEAD V 16356925.23

SUB HEAD VI- FLOORING WORK

9 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Stone work (machine cut edges) for wall lining etc. (veneer work)

upto 10 metre height, backing filled with a grout of average 12 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) including

1 7.23 pointing in white cement mortar 1:2 (1 white cement : 2 stone dust)

with an admixture of pigment matching the stone shade : (To be

secured to the backing and the sides by means of cramps and pins

sand be paid- for

stone separately)

face machine cut and table rubbed with

Providing and fixing stainless steel cramps of required size and shape

for anchoring stone wall lining to the backing or securing adjacent

2 7.25 stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse Kg 285.00 285.00 603.87 172101.58

sand) including making the necessary chases in stone and holes in

walls wherever required.

Providing and fixing copper pins 7.5 cm long 6 mm diameter for

securing adjacent stones in stone wall lining in cement mortar 1:2

(1cement : 2 coarse sand) including making the necessary chases.

Extra for stone work for wall lining on exterior walls of height more

4 7.39 than 10 m from ground level for every additional height of 3 m or sqm 1050.00 1050.00 87.59 91966.89

Providing and fixing structural steel frame (for dry cladding with 30

mm thick gang saw cut with machine cut edges sand stone) on walls

at all heights using M.S. square / rectangular tube in the required

pattern as per architectural drawing, including cost of cutting,

bending, welding etc. The frame work shall be fixed to the wall with

the help of MS brackets / lugs of angle iron / flats etc. which shall

be welded to the frame and mbedded in brick wall with cement

concrete block 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) of size 300x230x300 mm, including

cost of necessary centring and shuttering and with approved

expansion hold fasteners on CC/RCC surface, including drilling

necessary holes. Approved cramps / pins etc. shall be welded to the

frame work to support stone cladding, the steel work will be given a

priming coat of Zinc primer as approved by Engineer-in-Charge and

painted with two or more coats of epoxy paint (Shop drawings shall

be submitted by the contractor to the Engineer-in-Charge for

approval before execution). The frame work shall be fixed in true

horizontal & vertical lines/planes. (Only structural steel frame work

shall be measured for the purpose of payment, stainless steel cramps

shall be paid for separately and nothing extra shall be paid.)

10 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing & Fixing adjustable stainless steel cramps of approved

quality ,required shap & size ,adjustable with stainless steel nuts

,bolts and washer (total wieght less then 260 gms )for dry stone fixed

5 7.42 on frame work at suitaable lacation , including making necessary each 33910.00 33910.00 216.63 7345945.88

recesses in stone slab ,drilling reqired holes ect complete as per

direction of the Engineer-in-charge.with stainless steel nuts and bolts

Providing and fixing 18mm thick gang saw cut mirror polished

premoulded and prepolished) machine cut for kitchen platforms,

vanity counters, window sills , facias and similar locations of required

size of approved shade, colour and texture laid over 20mm thick base

6 8.2 cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated

with white cement, mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

Providing edge moulding to 18mm thick marble/Granite stone

counters, Vanities etc. including machine polishing to edge to give

7 8.3 high gloss finish etc. complete as per design approved by Engineer-in-

Extra for fixing marble /granite stone over and above corresponding

basic item, in facia and drops of width upto 150 mm with epoxy resin

based adhesive including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/

kitchen sink in kitchen platform, vanity counters and similar location

9 8.5 in marble/Granite/stone work including necessary holes for pillar taps Each 40.00 40.00 406.25 16250.19

etc. including moulding, rubbing and polishing of cut edges etc.

Providing and fixing stone slab table rubbed, edges rounded and

polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter

10 8.10 and embedding the stone in the chase with epoxy grout or with

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6mm nominal size) as per direction of Engineer-in-charge

8.10.2 Granite Stone of approved shade. Sqm 48.50 48.50 3429.42 166326.69

11 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and laying flamed finish Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of the

building all complete as per the architectural drawings with 18 mm

11 8.12 thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry

and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all

complete as specified

Flamed finish granite and as slab

stone directed by the Cherry

Jet Black, Engineer-in-Charge :

Red, Elite Brown,

Cat Eye or equivalent.

Kota stone slab flooring over 20 mm (average) thick base laid over

and jointed with grey cement slurry mixed with pigment to match the

shade of the slab including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement

13 11.27 3coarse sand) and jointed with grey cement slurry mixed with Sqm 99.60 99.60 1251.81 124680.59

pigment to match the shade of the slabs, including rubbing and

polishing complete.

Extra for pre finished nosing in treads of steps of Kota stone/ sand

Rate Extra for Kota stone/ sand stone in treads of steps and risers

15 using single length up to 1500 mm completed as per drawing. Sqm 182.65 182.65 192.73 35202.97

Providing and fixing Ist quality ceramic glazed wall tiles conforming

to IS : 15622 (thickness to be specified by the manufacturer ) of

approved make in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge, in skirting,

16 11.36 risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 Sqm 821.00 821.00 879.19 721811.12

(1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm including pointing in white cement mixed with pigment

of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm

or more (thickness to be specified by the manufacturer) of 1st quality

conforming to IS : 15622 of approved make in all colours, shades,

except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick

Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the

joints with white cement and matching pigments etc., complete.

12 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and laying vitrified floor tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption's less than

0.08%and conforming to IS : 15622 of approved make in all colours

and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4

coarse sand) including grouting the joints with white cement and

matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer) with water absorption less than 0.08 %

and conforming to I.S. 15622, of approved make in all colours &

19 11.46 shade in skirting, riser of steps, over 12 mm thick bed of cement

mortar 1:3 (1cement: 3 coarse sand), including grouting the joint

with white cement &matching pigments etc. complete.

20 16.30 Supplying and stacking at site.

16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Cum 25.00 25.00 690.51 17262.67

16.3.5 Over burnt (Jhama) brick aggregate 90 mm to 45 mm. Cum 27.53 27.53 714.94 19685.13

Laying water bound macadam sub-base with brick aggregate and

blinding material, earth etc. including screening, sorting and

16.5 spreading to template and consolidation with light power road-roller

etc. complete.(payment for brick aggregate and moorum etc. to be

made separately)

16.5.1 Over burnt (Jhama) brick aggregate 120 mm to 40 mm. Cum 41.50 41.50 345.31 14330.20

16.5.2 Over burnt (Jhama) brick aggregate 90 mm to 45 mm. Cum 45.00 45.00 345.31 15538.77

Supplying, stacking and Spreading 6 mm thick red bajri, watering

21 16.6 and rolling complete including preparation of the surface and rolling.

16.6.1 With road roller/ hand roller. Sqm 1935.00 1935.00 15.66 30297.29

TOTAL FOR SUB HEAD VI 61222603.65 35202.97

SUB HEAD VII- FINISHING WORK

1 13.1 12 mm cement plaster of mix :

15 mm cement plaster on the rough side of single or half brick wall of

18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick

cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with

13 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

4 13.16 6 mm cement plaster of mix :

Extra for plastering exterior walls of height more than 10 m from

level for every additional height of 3 m or part thereof.

Extra for plastering on circular work not exceeding 6 m in radius:

White washing with lime to give an even shade: (For lift shaft

,Electrical room , Store Rooms& machine Room)

13.37.1 New work (three or more coats) Sqm 450.00 450.00 17.02 7660.62

Distempering with oil bound washable distemper of approved brand

and manufacture to give an even shade

New work (two or more coats) over and including water thinnable

priming coat with cement primer.

13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and

9 13.45.1 including priming coat of exterior primer applied @2.20kg/10 sqm. Sqm 3485.00 3485.00 153.90 536325.88

Finishing with Deluxe Multi surface paint system for interiors and

exteriors using Primer as per manufacturers specifications :

Painting wood work with Deluxe Multi Surface Paint of required

shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under

coat of primer applied @0.75 ltr/ 10 sqm of approved brand or

Finishing with Epoxy paint (two or more coats) at all locations

prepared and applied as per manufacturer's specifications including

appropriate priming coat, preparation of surface, etc. complete.

Painting (two or more coats) on rain water, soil, waste and vent pipes

and fittings with synthetic enamel paint of approved brand and

manufacture and required colour over a priming coat of approved

steel primer on new work.

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade

13.62.1 with ordinary paint of approved brand and manufacture sqm 56.00 56.00 111.65 6252.50

14 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Lettering with black Japan paint of approved brand and manufacture per

Extra for addition of synthetic Polyester triangular fibre of length

6mm, effective diameter 10-40 microns and specific gravity of 1.34 to Per bag

12 13.79 1.40 in cement plaster/mortar by using 125gms. of synthetic of 50 kg 1920.00 1920.00 61.00 117122.42

Polyester triangular fibre for 50 Kgs. cement used in cement mortar cement

as per directions of Engineer-in-Charge

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

TOTAL FOR SUB HEAD VII 10773297.32

SUB HEAD-VIII- ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators

and partitions with extruded built up standard tubular

sections/appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM

1 21.1 rubber/neoprene gasket etc. Aluminium sections shall be smooth,

rust free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass/ stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade

21.1.1.1 according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 3620.00 3620.00 366.22 1325708.22

For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings

wherever required including the cost of EPDM rubber / neoprene

gasket required (Fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade

21.1.2.1 according to IS: 1868, Minimum anodic coating of grade AC 15) kg 1715.70 1715.70 426.54 731807.74

15 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

3 21.3 complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in

21.3.1 With float glass panes of 4.0 mm thickness Sqm 25.00 25.00 870.88 21772.09

Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logo

embossed on the body / plate with double spring mechanism and

door weight upto 125 kg, for doors, including cost of cutting floors,

21.4 embedding in floors as required and making good the same matching

to the existing floor finishing and cover plates with brass pivot and

single piece M.S. sheet outer box with slide plate etc. complete as per

the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness each 10.00 10.00 2142.66 21426.63

Filling the gap in between aluminium frame & adjacent RCC/ Brick/

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

21.8.1 Upto 5mm depth and 5 mm width Rmt 1947.00 1947.00 93.26 181581.21

Providing and fixing aluminium tubular handle bar 32 mm outer dia,

5 21.12 3.0 mm thick & 2100 mm long with SS screws etc .complete as per

direction of Engineer-in-Charge.

21.12.1 Anodized (AC 15 ) aluminium tubular handle bar Each 4.00 4.00 486.54 1946.16

Providing and fixing 100mm brass locks (best make of approved

6 21.13 quality) for aluminium doors including necessary cutting and making Each 2.00 2.00 439.93 879.87

good etc. complete.

Providing and fixing anodised aluminium (anodised transparent or

dyed to required shade according to IS: 1868. Minimum anodic

coating of grade AC 15) sub frame work for windows and ventilators

7 21.14 with extruded built up standard tubular sections of approved make Kg 3068.00 3068.00 328.07 1006525.66

conforming to IS: 733 and IS: 1285, fixed with dash fastener of

required dia and size (Dash fastener to be paid for separately).

(Aluminium section 50x25*3.2)

16 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing anodised aluminium grill /louver (anodised

transparent or dyed to required shade according to IS: 1868 with

minimum anodic coating of grade AC 15) of approved design/pattern,

with approved standard section and fixed to the existing window

frame with C.P brass/ stainless steel screws @ 200mm centre to

8 21.17 centre, including cutting the grill to proper opening size for fixing and Kg 10434.50 10434.50 423.86 4422728.71

operation of handles and fixing approved anodised aluminium

standard section around the opening, all complete as per requirement

and direction of Engineer-in-charge. (Only weight of grill to be

measured for payment).

TOTAL FOR SUB HEAD VIII 7714376.28

SUB HEAD IX- WATERPROOFING WORK

Providing and fixing of expansion joint system related with floor

location as per drawings and direction of Engineer-In-Charge. The

joints system will be of extruded aluminum base members, self

aligning / self centering arrangement and support plates etc. as per

ASTM B221-02. The system system for various vertical localtion in

load application areas that accommodates multi directional seismic

movement without stress to it's components. System shall consist of

metal profiles with a universal aluminum base member designed to

accommodate various project conditions and finish floor treatments.

1 5.44 The cover plate shall be designed of width and thickness required to

satisfy projects movement and loading requirements and secured to

base members by utilizing manufacturer's pre-engineered self-

centering arrangement that freely rotates / moves in all directions.

The Self -centering arrangement shall exhibit circular sphere all

directions. The Self -centering arrangement shall exhibit circular

sphere vertical displacement. Provision of Moisture Barrier Membrane

in the Joint System to have watertight joint is mandatory requirement

all as per the manufactures design and as approved by Engineer -in-

Charge (Material shall confirm to ASTM 6063.) .

Providing and fixing of expansion joint system related with wall

joints(internal/External location as per drawings and direction of

Engineer-In-Charge. The joints shall be of extruded aluminum base

members, self aligning / self centering arrangement and support

plates etc. as per ASTM B221-02. The Materail shall be such that it

provides an Expansion joints system suitable for vertical wall /wall to

2 5.45 corner application ,both new &Exiting construction in buildings with

no slipping dwon tendency amongst the components of the joints

systems. the joint system shall utilize light weight aluminum profiles

Extibting minimal Exposed Aluminium Surface mechanically snap

locking the multicellular to facilitate movement .(Materail shall

coffime to ASTM 6063) (Material shall confirm to ASTM 6063.) .

17 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing of expansion joint system of approved make and

manufacturers for various roof location as per approved drawing and

direction of engineer in charge . The joint shall be of extruded

aluminium base members with, self align and self centering

arrangement support plates as per ASTMB221-02.The system shall be

such that it provides water tank roof to roof / roof to corner joint

cover expansion control system that is capable of accomodating

multidirectional siesmic movement without stress to its component.

System shall consist of metal profile that incorporates a universal

aluminium based member designed to accomodate various project

condition and roof treatments. The cover plate shall be designed of

width and thickness required to satisfy movement and loading

3 5.46 requirements and screwed to badse embers by utilizing

manufacturers pre engineered self centering arrangement that freely

rotates/ moves in all directions. The self centering arrangement shall

exhibit circular sphere ends that lock and slide inside the

corresponding aluminium extrusion cavity to allow freedom of

movement and flexure in all directions including vertical

displacement. The jointts system shall resists damages in all

directions from the impact of falling ice, exposure to UV, airborne

contaminants and occasional foot traffic from maintenance personnel

. Provision of moisture barrier memberane in the joint system to have

water tank jointing mandatory requirements. Material shall confirm to

Providing gola 75X75 mm in cement mortar 1:2:4 (1 cement : 2

Coarse sand : 4 stone aggregates 10 mm down ) including finishing

4 12.21 with cement mortar 1:3 (1 cement : 3 fine sand ) as per standard Rmt 554.00 554.00 150.38 83307.86

design :in75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C.

5 12.22 sheet1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 Each 22.00 22.00 196.14 4315.06

cement :3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

18 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal

6 12.41 ring conforming to IS : 5382, leaving 10 mm gap for thermal Mtr 585.00 585.00 243.43 142404.85

expansion, (i) Single socketed pipes.

12.41.2 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to

6 12.42 IS : 13592 Type A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.3 Single tee with door

12.42.4 Single tee without door

12.42.6 Shoe (Plain)

Providing and fixing unplasticised -PVC pipe clips of approved design

to unplasticised - PVC rain water pipes by means of 50x50x50 mm

7 12.43 hard wood plugs, screwed with M.S. screws of required length,

including cutting brick work and fixing in cement mortar 1:4 (1

cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing to the inlet mouth of rain water pipe cast iron

8 12.44 grating 15 cm diameter and weighing not less than 440 grams. Each 22.00 22.00 43.19 950.17

Providing and Placing in position suitable PVC water stops conforming

to IS:12200 for construction/ expansion joints between two RCC

9 22.4 members and fixed to the reinforcement with binding wire before

pouring concrete etc. complete : for Over headwater tank)

22.4.2 Dumb bell with central bulb (180mm wide, 8mm thick). Mtr 40.00 40.00 484.59 19383.79

19 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying : a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound@ 0.253 kg/sqm. This layer will be allowed to air cure for 4

10 22.5 hours. b)Second layer of slurry of cement @ 0.242 kg/sqm mixed sqm 410.00 410.00 297.49 121972.05

with waterproofing cement compound @ 0.126 kg/sqm. This layer will

be allowed to air cure for 4 hours followed with water curing for 48

hours. The rate includes preparation of surface, treatment and sealing

of all joints, corners, junctions of pipes and masonry with polymer

Providing and laying water proofing treatment on roofs of slabs by

applying cement slurry mixed with water proofing cement compound

consisting of applying: a) after surface preparation, first layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound@ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth

when the first layer is still green. Overlaps of joints of fibre cloth

should not be less than 10 cm. c) third layer of 1.5 mm thickness

11 22.6 consisting of slurry of cement @ 1.289 kg/sqm mixed with water Sqm 1292.50 1292.50 410.20 530177.55

proofing cement compound@ 0.670 kg/sqm and coarse sand @ 1.289

kg/sqm. This will be allowed to air cure for 4 hours followed by water

curing for 48 hours. The entire treatment will be taken upto 30cm on

parapet wall and tucked into groove in parapet all around. d) fourth

and final layer of brick tiling with cement mortar (which will be paid

for separately For the purpose of measurement the entire treated

surface will be measured.

TOTAL SUB HEAD IX- WATERPROOFING WORK 2752637.37

SUB HEAD X - WOOD WORK

Providing and fixing ISI marked flush door shutters conforming to IS:

2202 (Part I) non-decorative type, core of block board construction

1 9.21 with frame of 1stclass hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on

both faces of shutters :

35 mm thick including ISI marked Stainless Steel butt hinges with

Extra for providing lipping with 2nd class teak wood battens 25 mm

2 9.23 minimum depth on all edges of flush door shutters (over all area of Sqm 126.85 126.85 384.45 48767.46

door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of

3 9.24 flush doors (cost of glass excluded) (overall area of door shutter to be

9.24.1 Rectangular or square. Sqm 126.85 126.85 146.49 18581.89

20 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Extra for cutting rebate in flush door shutters (Total area of the

shutter to be measured).

Providing and fixing wooden Architrave /moulded beading to door and

5 9.40 window frames with iron screws, plugs and priming coat on

unexposed surface etc. complete :

9.40.1 Second class teak wood

Providing and fixing IS : 12817 marked stainless steel butt hinges

with stainless steel screws etc. complete :

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS :

7 9.84 3564, embossed on the body, door weight upto 36 kg to 80 kg and Each 60.00 60.00 1096.66 65799.40

door width from 701 mm to 1000mm) with double speed adjustment

with necessary accessories and screws etc. complete.

Providing and fixing factory made P.V.C. door frame of size 50x47mm

with a wall thickness of 5mm, made out of extruded 5mm rigid PVC

foam sheet, mitred at corners and joined with 2 Nos. of 150mm long

brackets of 15x15mmM.S. square tube, the vertical door frame

8 9.119 profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, Mtr 124.15 124.15 482.28 59875.44

EPDM rubber gasket weather seal to be provided through out the

frame. The door frame to be fixed to the wall using M.S. screws of

65/100mm size, complete as per manufacturers specification and

direction of Engineer-in-Charge.

21 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing factory made panel PVC door shutter consisting

of frame made out of M.S. tubes of 19 gauge thickness and size of

19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.

frame shall have a coat of steel primers of approved make and

manufacture . M.S. frame covered with5mm thick heat moulded PVC

'C' channel of size 30mm thickness, 70mmwidth out of which 50mm

shall be flat and 20mm shall be tapered in 45degreeangle on both

side forming styles; and 5mm thick, 95mm wide PVC sheet out of

which 75mm shall be flat and 20mm shall be tapered in 45 degree on

the inner side to form top and bottom rail and 115mm wide PVC sheet

9 9.120 out of which 75mm shall be flat and 20mm shall be tapered on both

sides to form lock rail. Top, bottom and lock rails shall be provided

both side of the panel.10mm (5mm x 2 ) thick, 20mm wide cross PVC

sheet be provided as gap insert for top rail & bottom rail. paneling of

5mm thick both side PVC sheet to be fitted in the M.S. frame welded/

sealed to the styles & rails with 7mm(5mm+2mm) thick x 15mm

wide PVC sheet beading on inner side, and joined together with

solvent cement adhesive. An additional 5mm thick PVC strip of20mm

width is to be stuck on the interior side of the 'C' Channel using PVC

solvent adhesive etc. complete as per direction of Engineer-in-charge.

Manufacturer’s specification & drawing

9.120.1 30 mm thick plain PVC door shutters. Sqm 60.85 60.85 2889.39 175819.36

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt / suede finish with high density protective

10 9.127 surface layer and reverse side of adhesive bonding quality conforming

to IS : 2046 Type Including cost of adhesive of approved quality

TOTAL FOR SUB HEAD - X

SUB HEAD - XI-FALSE CEILING

Providing and fixing thermal insulation of ceiling (under deck

insulation) with Resin Bonded Fibre glass wool conforming to IS :

8183, density24kg / m3, 50mm thick, wrapped in 200 G Virgin

Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @

60 cm and wire mesh of12.5 mm x 24 gauge wire mesh, for top most

ceiling of building.

22 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from

M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both

side inclusive) as per IS : 277 and consisting of angle cleats of size

25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5mm dia x 50mm long with 6mm dia bolts other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts &bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the rate of

1200mm centre to centre to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a

2 12.45 direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with

the help of dry wall screws of size3.5 x 25 mm at 230 mm c/c,

including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing

tapes , finishing with jointing compound in 3layers covering upto 150

mm or both sides of joint and two coats of primer suitable for board,

all as per manufacture's specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board. Sqm 3645.00 3645.00 1113.36 4058215.35

23 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing tiled false ceiling of approved materials of size

595x595 mm in true horizontal level suspended on inter locking

metal grid of hot dipped galvanized steel sections ( galvanized @

120gsm/sqm, both side inclusive) consisting of main "T" runner with

suitably spaced joints to get required length and of size

24x38mmmade from 0.30mm thick (minimum) sheet, spaced at

1200mm center to center and cross "T" of size 24x25mm made of

0.30mm thick(minimum) sheet, 1200mm long spaced between main

"T" at 600mmcenter to center to form a grid of 1200x600 mm and

secondary cross T of length 600mm and size 24x25mm made of 0.30

mm thick(minimum) sheet to be interlocked at middle of the

1200x600mm panel to form grids of 600x600mm and wall angle of

size 24x24x0.3 mm and laying false ceiling tiles of approved texture

3 12.52 in the grid including, wherever, required, cutting/making, opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors

etc. Main "T" runners to be suspended from ceiling using GI slotted

cleats of size 27 x 37 x 25 x1.6x mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners,4mm GI adjustable rods with

galvanised butterfly level clips of size 85 x30 x 0.8 mm spaced at

1200mm center to center along main T, bottom exposed width of 24

mm of all T-sections shall be pre-painted with polyester paint, all

complete at all heights as per specifications drawings and as directed

by Engineer-in-charge.12.52.1 GI Metal Ceiling Lay in plain Tegular

edge Global white color tiles of size 595x595 mm, and 0.5mm thick

with 8mmdrop; made of G I sheet having galvanizing of 100

gms/sqm(both sides inclusive) and electro statically polyester powder

coated of thickness 60 microns (minimum), including factory painted

GI Metal Ceiling Lay in perforated Tegular edge global white color

tiles of size 595x595 mm and 0.5mm thick with 8mmdrop; made of

GI sheet having galvanizing of 100 gms/sqm(both sides inclusive)

12.52.2 and 20% perforation area with 1.8mmdia holes and having NRC Sqm 370.00 370.00 1758.58 650674.87

(Noise Reduction Coefficient ) of0.5, electro statically polyester

powder coated of thickness60 microns (minimum), including factory

painted after bending and perforation, and backed with a black Glass

Providing and laying roof insulation with 40 mm thick impervious

sprayed, closed cell free Rigid Polyurethane foam over deck insulation

conforming to IS - 12432 Pt. III (density of foam being 40-45

kg/cum),over a coat of polyurethane primer applied @ 6-8 sqm per

4 12.56 litre, laying400 G polythene sheet over PUF spray and providing a Sqm 3645.00 3645.00 1226.54 4470739.93

wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2

coarse sand : 4stone aggregate 20 mm nominal size) in chequered

rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G

wire netting and sealing the joints with polymerized mastic, all

complete as per direction of Engineer-in-Charge.

TOTAL SUB HEAD - XII-FALSE CEILING

24 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

SUB HEAD - XII-GLAZING AND ALUMINIUM COMPOSIT PANAL

Providing and fixing 12 mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & spring type fixing arrangement and

making necessary holes etc. for fixing required door fittings, all

complete as per direction of Engineer-in-charge (Door handle, lock

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved

shop drawings , the aluminium quality as per grade 6063 T5 or T6 as

per BS 1474,including super durable powder coating of 60-80 microns

conforming to AAMA 2604 of required colour and shade as approved

by the Engineer-in-Charge

Designing, fabricating, testing, protection, installing and fixing in

position semi (grid) unitized system of structural glazing (with open

3 26.2 joints) for linear as well as curvilinear portions of the building for all

heights and all levels including:

:(a) Structural analysis, design and preparation of shop drawings for

the specified design loads conforming to IS 875 part III (the system

must passed the proof test at 1.5 times design wind pressure without

any failure), including functional design of the aluminum sections for

fixing glazing panels of various thicknesses, aluminium cleats,

sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts,

clamps etc., structural and weather silicone sealants, flashings, fire

stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for

water tightness, pressure equalisation & drainage and protection

against fire hazard including

(b) Fabricating and supplying serrated M.S. hot dip galvanised

/Aluminium alloy of 6005 T5 brackets of required sizes, sections and

profiles etc. to accommodate 3 Dimentional movement for achieving

perfect verticality and proper fixing of structural glazing system with

the RCC/ masonry/structural steel framework of building structure,

using stainless steel anchor fasteners/ bolts, nylon seperator to

prevent bimetallic contacts with nuts and washers etc. of stainless

steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone

sealant and one part weather silicone sealant compatible with the

structural silicone sealant of required bite size in a clean and

controlled factory / work shop environment , including double sided

spacer tape, setting blocks and backer rod, all of approved

grade,brand and manufacturer, as per the approved sealant design,

within and all around the perimeter for holding glass

25 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

.(d) Providing and fixing in position flashings of solid aluminium sheet

1 mm thick and of sizes, shapes and profiles, as required as per the

site conditions, to seal the gap between the building structure and all

its interfaces with curtain glazing to make it watertight

(e) Making provision for drainage of moisture/ water that enters the

curtain glazing system to make it watertight, by incorporating

principles of pressure equalization, providing suitable gutter profilesat

bottom (if required), making necessary holes of required sizes and of

required numbers etc. complete This item includes cost of all inputs

of designing, labour for fabricating and installation of aluminium grid,

installation of glazed units, T&P,scaffolding and other incidental

charges including wastages etc.,enabling temporary structures and

services, cranes or cradles etc. as described above and as specified.

The item includes the cost of getting all the structural and functional

design checked and all the shop drawings vetted by the Principals of

the structural glazing system.The item also includes the cost of all

mock ups at site, cost of all samples of the individual components for

testing in an approved laboratory, field tests on the assembled

working structural glazing as specified, cleaning and protection till the

handing over of the building for occupation. In the end, the

Contractor shall provide a water tight structural glazing having all the

performancecharacteristics etc. all complete as required, as per the

Architectural drawings, as per item description, as specified, as per

the approved shop drawings and as directed by the Engineer-in-

Note:- 1. The cost of providing extruded aluminium frames, shadow

boxes, extruded aluminium section capping for fixing in the grooves

of the curtain glazing and vermin proof stainless steel wire mesh shall

be paid for separately under relevant items under this subhead.

However, for the purpose of payment, only the actual area of

structural glazing (including width of grooves ) on the external face

shall be measured in sqm. up to two decimal places.

Note:-2. The following performance test are to be conducted on

glazing system if area of structural glazing exceeds 2500 Sqm from

certified laboratories accreditated by NABL(National Accreditation

for Testing and Calibration Laboratories), Department of Science &

Technologies, India. Cost of testing is payable separately. The NIT

approving authority will decide the necessity of testing on the basis of

cost of the work, cost of the test and importance of the work.

Performance Testing of Structural glazing system Tests to be

conducted in the NBL Certified laboratories

26 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa)

(+50pa to +300pa) as per ASTM E-283-04 testing method for a range

of testing limit 1 to 200 mVhr”

Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-

2 09 testing method for a range up to 2000 ml.”

Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05

3 testing method for a range upto 2000 ml”

Structural Performance Deflection and deformation by static air

4 test (1.5 times desing wind pressure without any failure) as per

330-10 testing method for a range upto 50 mm”

Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing

method for Qualitative test” Tests to be conducted on site 6. Onsite

Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)

Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12-6 mm insulated glass (double

glazed) vision panel units of size and shape as required and specified,

comprising of an outer high performance heat strengthened float

glass 6mm thick, of approved colour and shade with reflective soft

coating on surface # 2 of approved colour and shade, an inner Heat

strengthned clear float glass 6mm thick, spacer tube 12mm

wide,dessicants, including primary seal and secondary seal

(structural silicone sealant) etc. all complete for the required

performances, as per the Architectural drawings, as per the approved

shop drawings,as specified and as directed by the Engineer-in-

4 26.3 Charge. The IGUs shall be assembled in the factory/ workshop of the Sqm 190.00 190.00 4298.93 816797.44

glass processor.(Payment for fixing of IGU Panels in the curtain

glazing is included in cost of item No.1) For payment, only the actual

area of glass on face # 1 of the glass panels (excluding the areas of

the grooves and weather silicone sealant) provided and fixed in

position, shall be measured in sqm. (i) Coloured tinted float glass

6mm thick substrate with reflective soft coating on face # 2, + 12mm

Airgap + 6mm Heat Strengthened clear Glass of approved make

having properties as visible Light transmittance (VLT) of 25 to 35 %,

Light reflection internal 10 to 15%, light reflection external 10 to 20

%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2

degree K etc. (Glass Make Saint gobain,Asahi,Pilkington,Glod Plus)

27 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Extra for openable side / top hung vision glass panels (IGUs)

including providing and supplying at site all accessories and

hardwares for the openable panels as specified and of the approved

make such as heavy duty stainless steel friction hinges, min 4 -point

5 26.4 cremonelocking sets with stainless steel plates, handles, buffers etc. Sqm 1.20 1.20 3217.93 3861.52

including necessary stainless steel screws/ fasteners, nuts, bolts,

washers etc. all complete as per the Architectural drawings, as per

the approved shop drawings, as specified and as directed by the

Engineerin-in-Charge.

Providing and supplying Spandrel Glass Panels comprising of 6 mm

thick heat strengthened monolithic float glass of approved colour and

shade with reflective soft coating on surface # 2 of approved colour

and shade so as to match the colour and shade of the IGUs in the

vision panels etc. ,all complete for the required performances as

specified, as per the Architectural drawings, as per the approved shop

drawings, as specified, and as directed by the Engineer- in-

Charge.“For payment, only the actual area of glass on face # 1 of the

glass panels (but excluding the area of grooves and weather silicone

sealant) provided and fixed in position, shall be measured in sqm.

(Payment for fixing of Spandrel Glass Panels in the curtain glazing is

included in cost of relevent Item*). (i) Coloured tinted float glass

6mm thick substrate with reflective soft coating on face # 2, having

properties as visible Light transmittance (VLT) of 25 to 35 %, Light

reflection internal 10 to 15%, light reflection external 10 to 20 %,

shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K

etc. The properties of performance glass shall be decided by

technical sanctioning authority as per the site requirement.

28 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Designing, fabricating, testing, installing and fixing in position Curtain

Wall with Aluminium Composite Panel Cladding, with open grooves

for linear as well as curvilinear portions of the building, for all

heights and all levels etc. including:

a) Structural analysis & design and preparation of shop drawings for

pressure equalisation or rain screen principle as required, proper

drainage of water to make it watertight including checking of all the

structural and functional design.

b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic colour

of approved shades made out of 4mm thick aluminium composite

panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick).

The aluminium composite panel cladding sheet shall be coil coated,

with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin

coating of approved colour and shade on face # 1 and polymer

(Service) coating on face # 2 as specified using stainless steel

screws, nuts, bolts, washers, cleats, weather silicone sealant, backer

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot

Dip Galvanised with serrations and serrated washers to arrest the

wind load movement, fasteners, SS 316 Pins and anchor bolts of

approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and

drawing The item includes cost of all material & labour component,

the cost of all mock ups at site,

cost of all samples of the individual components for testing in an

approved laboratory, field tests on the assembled working curtain

wall with aluminium composite panel cladding, cleaning and

protection of the curtain wall with aluminium composite panel sqm 1750.00 1750.00 3967.24 6942663.44

cladding till the handing over of the building for occupation. Base

frame work for ACP cladding is payable under the relevant aluminium

item.s The Contractor shall provide curtain wall with aluminium

composite panel cladding, having all the performance characteristics

all complete , as per the Architectural drawings, as per item

description, as specified, as per the approved shop drawings and as

directed by the Engineer-in-Charge. However, for the purpose of

payment, only the actual area on the external face of the curtain

wall with Aluminum Composite Panel Cladding (including width of

groove) shall be measured in sqm. up to two decimal places.

TOTAL FOR SUB HEAD XI 13474042.50

SUB HEAD-XIII FIRE RESISTANT DOOR

29 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing fire resistant door frame of section 143 x 57 mm

having built in rebate made out of 16 SWG G.I.sheet (zinc coating not

less than 120gm/sqm) duly filled with vermuculite based concrete

mix, suitable for mounting60 minutes fire rated door shutters. The

frame is fitted with intumuscent fire seal strip of size 10x4 mm

(minimum) alround the frame and fixing with dash fastener of

approved size and make, including applying a coat of approved brand

fire resistant primer etc. complete as per direction of Engineer-in-

charge(Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of

60 minutes fire rating conforming to IS:3614 (Part-II) tested and

certified as per laboratory approved by Engineer-in-charge with

suitable mounting on doorframe, consisting of vertical styles, lock

rail, top rail 100mm wide, bottom rail200mm wide, made out of 16

2 9.137 SWG G.I.sheet (zinc coating not less than 120 gm/sqm duly filled FR Sqm 39.60 39.60 6586.88 260840.26

insulation material and fixing with necessary stainless steel ball

bearing hinges of approved make, including applying a coat of

approved fire resistant primer etc. all complete as per direction of

Engineer-in charge(pannelling to be paid for separately).

Providing and fixing glazing in fire resistant door shutters, fixed

panels, ventilators and partitions etc., with G.I. beading of

appropriate size made out of 20 SWG G.I.sheet (zinc coating not less

3 9.138 than 120 gm/sqm sealant, including applying a coat of approved fire

resistant primer on G.I. beading etc. complete all as per direction of

Engineer-in-charge.

With clear fire resistant glass panes 6mm thick of approved brand,

9.138.1 having minimum 60 minutes fire resistance. sqm 31.00 31.00 29064.87 901010.92

Providing and fixing panic bar / latch (Double point) fitted with a

single body, Trim Latch & Lock on back side of the Panic Latch of

4 9.139 reputed brand and manufacture to be approved by the Engineer- in- Each 16.00 16.00 6445.01 103120.19

charge, all complete.

Providing and applying two coats of fire retardant paint on cleaned

wood/ply surface @ 3.5 sqm per litre per coat including preparation

5 13.58 of base surface as per recommendations of manufacturer to make the Sqm 215.00 215.00 260.24 55951.71

surface fire retardant.

TOTAL SUB HEAD-XIII FIRE RESISTANT DOOR 1453465.58

SUB HEAD-XIV-WALL LINING WORKS

30 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing 50x50x50mm 2nd class teak wood plugs including cutting

brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand)

and making good the walls etc.

Providing and fixing expandable fasteners of specified size with

necessary plastic sleeves and galvanised M.S. screws including

drilling holes in masonry work /CC/ R.C.C. and making good etc.

Providing and fixing in wall lining flat pressed three layer (medium

density) particle board or graded wood Pre-laminated one side

3 9.35 decorative lamination on other side balancing lamination Grade I,

Type II, IS : 12823 marked, including priming coat on unexposed

surface, with necessary fixing arrangement and screws etc. complete :

Providing and fixing specified wood frame work consisting of battens

50x25 mm fixed with rawl plug and drilling necessary holes for rawl

plug etc. including priming coat complete.

Kiln seasoned and chemically treated hollock wood.

Providing and fixing thermal insulation with Resin Bonded Fibre glass

wool conforming to IS: 8183 having density 24 kg/cum , 50 mm

5 12.57 thick, wrapped in 200G Virgin Polythene Bags fixed to wall with sqm 3312.00 3312.00 336.16 1113374.23

screw, rawl plug & washers and held in position by criss crossing GI

wire etc. complete as per directions of Engineer-in-Charge.

TOTAL SUB HEAD-XIV-WALL LINING WORKS 8144746.24

SUB HEAD XV -MISCELLANEOUS WORKS

31 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and erecting 2.00 metre high temporary barricading at site

as per drawing/ direction of Engineer-in-Charge which includes

writing and painting, arrangement for traffic diversion such as traffic

signals during construction at site for day and night, glow lamps,

reflective signs, marking, flags, caution tape as directed by the

Engineer-in-Charge. The barricading provided shall be retained in

position at site continuously i/c shifting of barricading from one

1 16.81 location to another location as many times as required during the Mtr

execution of the entire work till its completion. Rate include its

maintenance for damages, painting, all incidentals, labour materials,

equipments and works required to execute the job. The barricading

shall not be removed without prior approval of Engineer-in-Charge.

(Note :- One time payment shall be made for providing barricading

from start of work till completion of work i/c shifting. The barricading

provided shall remain to be the property of the contractor on

completion of the work).

TOTAL SUB HEAD XV -MISCELLANEOUS WORKS

SUB HEAD-XVI NON SCHEDULE ITEMS

Sealing the core of different diameter pipes in the slabs of varying

thickness after fixing of sanitary / S.S. Pipes and fitting in the cut

areas and making it water proof and leak proof by following

Cutting 25 mm deep V-groove around the periphery of the pipe, and

sealing it with polymer modified mortar using 1 part acrylic polymer

: 2 part Cement : 5 Sand, applying three coats of acrylic polymer

Rate admixed with cement (as 1 part ShaliCrete: 2 part cement) over

1 concrete slab as well as on the pipe surface upto 150 mm height, Rmt 433.00 433.00 1071.79 464086.69

After first coat of acrylic polymer a layer of fibre glass mesh shall

be placed as centre core, This coating shall cover minimum 150 mm

around the periphery. moist cure for one day , then once the coating

is completely bone dry after about two days apply two coats of PU

modified liquid membrane by brush application , protection be

provided as per good engineering practice. (Perimeter of the sealed

area shall be measured for payment).

Core cutting in existing RCC slabs / walls of depth thickness in

required size including making arrangement for scaffolding, diamond

cutter, labour for all purpose, and all necessary equipment and

2 accessories like fixing dash fastener to fix machine complete as per Sqcm 638335.00 638335.00 1.51 965934.65

the directions of Engineer-in-charge. (Total cut surface area

(Perimeter and depth) will be measured to nearest cm for payment)

Providing Stainless Steel 20x20 mm square bar . foot rests including

3 fixing in water tank as per standard design : all complete as per Each 20.00 20.00 450.68 9013.69

Engineer in charge.

32 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Puddle flange of following dia. M.S/G.I pipe by providing 6mm thk

M.S plate minimum 100mm wide from the M.S/G.I pipe including

Rate welding , priming and bitumastic painting and necessary fixing

Analysis arrangement by welding or threading on both and as per

standard/requirement at site etc. complete as directed by engineer-in-

Providing & Fixing 150 mm Dia Each 2.00 2.00 1658.60 3317.21

(ii) Providing & Fixing 100 mm dia Each 4.00 4.00 1374.41 5497.66

(iii) Providing & Fixing 80 mm dia Each 4.00 4.00 1297.61 5190.44

(iv) Providing & Fixing 65 mm dia Each 6.00 6.00 1176.66 7059.94

(v) Providing & Fixing 50mm dia Each 6.00 6.00 1099.89 6599.36

EPDM Rubbergard Membrane.Water proofing :-Horizontal area:

Providing and laying a layer of 200 gsm Geotextile is loose laid on

Lean concrete substrate. The geotextile membrane must be

overlapped for 75mm. The overlapping joint may be secured by

Stitching or Bonding Adhesive or hot air gun as convenient to the

waterproofing applicator. EPDM Rubbergard : Prividing & Laying 1.1

mm EPDM membrane confirming to above mentioned technical values

Rate is loose laid over the geotextile layer. The width of EPDM sheet should

5 be minimum 9 meter or large as possible to minimize the number of

joints. Adjacent sheet shall be laid in similar fashion with an overlap

of minimum 100 mm . Min 75mm wide rubber polymers butyl splice

tape having 100% solid content together with synthetic-rubber

polymer primer having 16-18% solids, Specific Gravity 0.793 and

Flash point-17.8 degree centigrade, should be used to make

watertight QuickSeam between 2 EPDM membranes.

Vertical wall:The surface of wall shall be smooth, hard , dry and free

from dust before applying treatment. 1.1mm thick EPDM Rubbergard

confirming to above standards is fully bonded to the RCC substrate

using FM approved solvent based Neoprene Bonding adhesive.

having following parameters : A blend of Polychloroprene and SBR

rubbers Solvents: A blend of Acetone, Hexane, Toluene and Xylene;

Viscosity: 3,300-3,800 cps, with R.V.F. #3 spindle @ 10

rpm,Weight/Gallon:6.6-7.4 lb/gal, Specific Gravity: 0.7909-0.8868;

V.O.C. Content: 5.282 lb/gal (633 g/L). All the insertions shall be

treated with uncured EPDM. The treatment to be terminated atleast at Sqm 3645.00 3645.00 801.60 2921838.45

the height of 300mm above the roof floor level using termination bar

and appropriate fasteners. Water block sealant should be used on top

edge behind membrane and lap sealant should be applied on the

edges of termination detail.

Uncured EPDM flashing

material factory laminated to splice tape should be used to flash

inside and outside corners, pipes, drain outlets, scuppers and other

penetrations or unusually shaped walls/details where the use of cured

membrane flashing is not practical.

33 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Rate Providing and fixing Stain finished Stainless Steel tower bolts Round

6 (barrel type) with necessary screws etc. complete :

Rate Providing and fixing Stain finished Stainless Steel 304 handles with

Analysis screws etc. complete :

Providing and fixing Stain finished Stainless Steel with Rubber

8 hanging type floor door stopper with necessary screws, etc. complete. Each 70.00 70.00 98.22 6875.54

Providing and fixing 304 Grade Stain less Steel Stain Finish Aldrop

9 with double lock hook size 200x16 mm with Screws etc. all Complete Each 74.00 74.00 387.93 28706.68

as per Engineer in charge.

Rate Providing & fixing wiremesh at juction of Brick works & RCC Works

Analysis all Complete as per direction of Engineer -in-charge.

Rate Extra for providing 5x3 mm Groove to 25 mm thick Kota & Granite

Analysis stone staircase Traed etc.

34 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Design, Manufacture, Supply and Installation of Poly carbonate panel

system, a complete assembly of extruded cellular structure UV

protected polycarbonate panels incorporated into a complete system.

Co-extruded UV protected polycarbonate panel system of minimum

16 mm thickness with panel width of 1050 - 1250 mm to ensure best

performance for wind uplift, vibration, oil canning and visual

appearance. Panels shall be manufactured with vertical standing

seam with standing seam height of 10 - 15mm at both sides of the

panel. Panels shall be of Softlite / Antiglare type to prevent glare.

Panels shall be fixed on Purlins with continuous twin wall aluminum

spacer and HD polycarbonate U connectors. Continuous twin wall

aluminum spacer will be secured on MS Structure with self-drilling

Rate screws to ensure a pull-out load of min. 21000N (21KN) tested as per

Analysis ISO 6892:1998 and IS 1608:2005. Polycarbonate panels also shall

not have Yellowness Index as per ASTM D 1925 of 15 units when

tested on a sample exposed to UV for 500 Hours as per ASTM G 155.

The polycarbonate panels must satisfy Dart drop impact test as per IS

14443-97 shall show no sign of breakage on Polycarbonate sheets

which have been exposed to UV for a min. of 500 Hours as per ASTM

G 155.Panel shall be with additional End cap/Aluminum U / F Profile /

Glazing Bar (mill finish) for ends as required. Panel shall be fixed over

M S structural steel / MS purlin (paid separately) conforming to the

detail technical specifications as per approved architectural

drawings.Trained and factory authorized labor with supervision to

complete the entire panel installation as per drawing & direction of

the engineer in charge.Color: As per Approval

Granite work gang saw cut (polished and machine cut) of thickness

30 mm for wall lining (veneer work), backing filled with a grout of

average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse

Rate sand)including pointing with white cement mortar 1:2 (1 white

Analysis cement : 2marble dust) with an admixture of pigment to match the

Granite shade:(To be secured to the backing by means of cramps,

which shall be paid for separately).

Providing and fixing double glazed hermetically sealed glazing in

aluminium windows, ventilators and partition etc. with 6 mm thick

Tempered glass both side(SKN 440Saint Gobain India & Exceed

Rate Green Vision Asahi india glass), having 12 mm air gap, including

Analysis providing EPDM gasket, perforated aluminium spacers, desiccants,

sealant (Both primary and secondary sealant) etc. as per

specifications, drawings and direction of Engineer-in-charge complete.

Rate Providing and fixing Stain finished Stainless Steel 316 glass door

15 Floor Lock with screws etc. complete : PF14S kich make or equivalent Each 10.00 10.00 3148.88 31488.84

35 NBCC (I) Ltd.

LECTURE THEATER BLOCK-2- CIVIL IIT Bhubaneswar

SI.No. DSR Description of Item Unit Total Balance DSR Rate MR RATE DSR-AMOUNT MR-AMOUNT

2014- Quantity in Quantity at which at which

Code Original to be item was item was

Tender executed awarded awarded

at Risk & in original in original

Cost tender tender

Providing and fixing Combi. finished Stainless Steel 316 glass door

16 pull handles 450x25mm (pair of handle) dia with screws etc. Each 10.00 10.00 4547.91 45479.09

complete : PHH2518 kich make or equivalent

Supply & fixing Fresh Color Restroom(Toilet) Cubicle made out of

Thickness of Compact Laminate : 18 mm. Size of Cubicle : 1000mm

(W) X 1550mm (D) X 2100mm (H),Door Size : 1995mm (H) x

Rate 610mm (W),Overall Height of Cubicle : 2100 mm (Including bottom 1No

Analysis Gap of 100mm) all Including Stainless Steel - 304 Grade Cubical

accessories,Occupancy Indicator , Rubber Lining for Groove. all

complete as per direction of Engineer-in-charge.

Providing and laying M-20 grade foam concrete filling in sunken

portion of W.C. & kitchen/Terrace with approved quality of foam

18 concrete including pumping of concrete to site of laying but excluding cum 991.75 991.75 4611.57 4573523.86

the cost of centering, shuttering.as per direction of Engineer-in-

Providing and fixing Romanhuse blinds non blockout with chain

19 Mechanism all complete Make.Vista,Hunter Duglus,fabindia Sqm 359.55 359.55 2074.74 745971.50

Extra Providing and Double Charge vitrified floor/wall tiles in different

20 sizes (thickness to be specified by the manufacturer) sqm 2086.50 2086.50 162.68 339432.95

SUBHEAD XVI TOTAL NON SCHEDULE ITEMS 30462444.36

36 NBCC (I) Ltd.

LECTURE COMPLEX - 2- Plumbing IIT Bhubneswar

NAME OF PROJECT :- LECTURE -2 BOQ FOR IIT BHUBNESWAR

B. SUMMARY OF PLUMBING WORKS

Sl. No. Description of Item DSR Amount M.R. Amount

1 SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING) 898965.14 3310888.99

2 SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES) 1484245.63 902493.59

3 SUB HEAD - III - (WATER SUPPLY) 803566.31 232168.90

4 SUB HEAD - IV - (SEWERAGE AND DRAINAGE) 1234879.09 385565.11

5 SUB HEAD - V - EXTERNAL WATER SUPPLY 97188.78 52432.09

6 SUBHEAD - VI - SUBMERSIBLE TRANSFER PUMPS 0.00 310031.41

7 SUB HEAD - VII - (RAIN WATER HARVESTING) 1023429.35 0.00

TOTAL DSR + MR 10735854.40

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

NAME OF PROJECT :- LECTURE -2 BOQ FOR IIT BHUBNESWAR

DETAILED ESTIMATE - PLUMBING WORK

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING)

17.5 Providing and fixing white vitreous china flat back half stall urinal of size

580x380x350 mm with white PVC automatic flushing cistern, with fittings,

standard size C.P. brass flush pipe, spreaders with unions and clamps (all in

1 C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating

and other couplings in C.P. brass, including painting of fittings and cutting

and making good the walls and floors wherever required

17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Each 36.00 36.00 6926.19 249342.89

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:

2 13983 with C.I. brackets and stainless steel plug 40 mm, including painting

of fittings and brackets, cutting and making good the walls wherever

17.10.1.3 510x1040 mm bowl depth 200 mm

17.31 Providing and fixing 900 x 600 mm beveled edge mirror of

superior glass (of approved quality) complete with 6 mm thick hard

board ground fixed to wooden cleats with C.P. brass screws and

washers complete.

4 17.34 Providing and fixing toilet paper holder.

17.78 Providing and fixing white vitreous china extended wall mounting water

closet of size 780x370x690 mm of approved shape including providing &

5 fixing white vitreous china cistern with dual flush fitting, of flushing capacity Each 54.00 54.00 10614.43 573179.21

3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern

fittings, nuts, bolts and gasket etc complete.

6 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions

18.21.2 45 cm length

18.21.2.1 15 mm dia nominal bore

18.51 Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

M.R. Providing and fixing CP brass bottle trap with wall connection pipe for

8 wash basins and urinals. Jaquar make cat. ALD-769L250x190 or

1 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Providing and fixing C.P. brass liquid soap container with C.P. brass

lid and brackets fixed to wall with wooden cleats and C.P. brass

9 screws, including cutting and making good the walls wherever Each 54.00 54.00 1083.57 58512.98

required. Jaquar make cat. ACN-1135N or EQUIVALENT

M.R. Providing and fixing C.P. brass towel ring with C.P. brass wall brackets

10 & C.P brass screws complete as required. Jaquar make cat. ACN- Each 54.00 54.00 793.11 42827.99

1121BN or EQUIVALENT

M.R. Providing, fixing, testing and commissioning of star white colour

vitreous china below / over counter Oval Wash Basin / circular

basin (Size 560 x 410 mm) with CP brass waste assembly complete Each 54.00 54.00 3743.95 202173.50

including CI / MS brackets duly painted, cutting and making good the

walls floors wherever jaquar make cat.no. FLS-WHT-0401 ,ALD-

709 or equivalent

M.R. Providing and fixing CP brass twin coat hooks fixed on toilet door/wall

12 with CP brass screws. Jaquar Make Cat. No ACN-1161N or Each 54.00 54.00 514.91 27805.23

M.R. Providing, fixing, testing and commissioning of C.P. brass single hole

sink mixer with CP wall flange, swinging spout complete as required

and making good. Jaquar Make Cat. No. KUB-35179B or

M.R. Supplying, Fixing , testing & commissioning of two way CP brass Bib

Cock with CP brass stop cock and ABS Heath Faucet (complete with

14 hook and flexible SS tube min. Length 1.0 m) as required. Jaquar Nos. 54.00 54.00 2743.36 148141.71

Make Cat. No. VGP-81041 , ALD-CHR-583 , LYR-38083 or

M.R. Providing, fixing, testing & commissioning of C.P. brass eurometic

15 self closing pillar tap. Jaquar Make Cat. No. 031] or EQUIVALENT Nos. 54.00 54.00 1809.74 97725.72

2 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Supply, Installation, Testing and commissioning of wall hanging drinking

online water cooler with bottle filler facility, made by stainless steel top and

heavy duty galvanized steel frame. With cooling capacity, ADA Compliant,

size 472 mm Depth X 447mm width, flexible bubbler guard , operated

between 50 to 120 PSI, Chiller unit Suitable to R134a Refrigerant, Adjustable

thermostat control, suitable for 220-230v/50-60 hz A/C Supply Complete

16 with all accessories which include MD-CU29, which is an EPA registered

antimicrobial copper that fights off microorganisms which include MRSA and

e-coli. The water Fountain shall possess NSF-USA, Green building, energy

star saving certification, and to be placed at different location of buidling.

Agency has to execute all civil work for installing the Water Fountain for

proper functioning and aesthetic view as directed by the engineer-in-charge

without any extra cost. (Oasis or Equivalent)

WITH 50 LPH RO System with 60 ltr HTP Storage tank Each 6.00 6.00 101773.29 610639.72

50 Lph RO System including with, RAW WATER PUMP, MICRON FILTER,

MEMBRANE HOUSING, Membrane Boosting Pump, RO Membranes, CONTROL Each 6.00 6.00 53228.26 319369.57

INSTRUMENTS, SKID Hanging with Pressure tank of capacity of 60 Ltr.

M.R. Providing and fixing in position storage type automatic electric water

heater pressure/ non pressure type thermostratically controlled, single

phase, vertical wall mounted of approved make ( to the approval of

Engineer-in-charge) with thermostats, inner container of stainless steel

17 complete with 1 Mtr three core flexible cord with plug, non return valve

and pressure release valve complete including fixing and testing complete

in all respect. Venus Make Model No. MAGMA-VERTICAL Allied

Jaquar Cat. No. ALD-805B or EQUIVALENT

50 litre capacity water heater Each 3.00 3.00 13735.69 41207.06

M.R. Providing & fixing of C.P. brass single hole basin mixer of approved quality:

(jaquar Or Equivalent)

M.R. Providing, fixing, testing and commissioning of shower including necessary

19 wall chases and making good. Make Cat. No. 281 KN] [Make Cat. No.

OHS-1985] [Make Cat. No. SHA-479 L450] or EQUIVALENT

Single lever wall mixer with spout, adjustable OH shower with arm and wall

flange complete with wall flange diverter assembly with Non-return Valves. Each 4.00 4.00 9337.25 37349.00

M.R. Providing and fixing lab sink for OTS, CONSULTANTS & OTHER AREAS of

20 approved quality complete will all respect as required and approved by Each 1.00 1.00 18377.44 18377.44

Engineer-in-charge. NAVELI OR EQUIVALENT

3 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Providing and fixing single bay SS janitor sink of approved quality complete

21 will all respect as required and approved by Engineer-in-charge. NAVELI Each 6.00 6.00 40044.27 240265.59

M.R. Providing and fixing adjustable type wash basin for handicap toilet complete

22 with brackets, tracks, waste pipes and other accessories complete as Each 6.00 6.00 50356.64 302139.85

required. [Presalit -Commander Make Cat. No. R4140]

M.R. Providing and fixing 2 Nos. support arms and backrest to mounted on the

23 track (vertically and laterally) for handicap toilet complete as required. Each 6.00 6.00 107448.63 644691.79

[Presalit -Commander Make Cat. No. R 3548 XXX & 6533]

M.R. Providing and fixing raised toilet seat with cover for handicap toilet [Presalit

-Commander Make Cat. No. R34000]

M.R. Providing and fixing ABS alloy steel grab bar. [Presalit -Commander Make

Cat. No. RT 100 XXX]

SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES)

4.1 Providing and laying in position cement concrete of specified grade excluding

1 the cost of centering and shuttering - All work up to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm and

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20

2 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 Each 28.00 28.00 196.14 5491.90

mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement, rounding the edges and making and finishing the outlet complete.

3 17. 35 Providing and fixing soil, waste and vent pipes.

17.35.1.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS:3989

17. 37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

4 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), including cost of cutting holes and making

good the walls etc.

4 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

17. 38 Providing and fixing bend of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS-3989

17.38.2.2 Sand cast iron S&S as per IS-3989

6 17. 39 Providing and fixing plain bend of required degree.

17.39.1.2 Sand cast iron S&S as per IS:3989

17.39.2. Sand cast iron S&S as per IS:3989

7 17. 40 Providing and fixing heel rest sanitary bend.

17.40.1.2 sand cast iron S&S as per IS-3989

17. 43 Providing and fixing single equal plain junction of required degree with

8 access door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 sand cast iron S&S as per IS-3989

17.43.2. sand cast iron S&S as per IS-3989

9 17. 44 Providing and fixing single equal plain junction of required degree

17.44.1.2 sand cast iron S&S as per IS-3989

17.44.2. sand cast iron S&S as per IS-3989

17. 47 Providing and fixing single unequal junction of required degree with access

10 door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.47.1.2 sand cast iron S&S as per IS-3989

5 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

11 17. 56 Providing and fixing terminal guard.

17.56.1.2 sand cast iron S&S as per IS-3989

17.56.2.2 sand cast iron S&S as per IS-3989

12 17. 57 Providing and fixing collar

17.57.1.2 Sand cast iron S&S as per IS-3989

17.57.2. Sand cast iron S&S as per IS-3989

17. 58 Providing lead caulked joints to sand cast iron /centrifugally cast (spun) iron

pipes and fittings of diameter:

17. 59 Providing and fixing M.S. stays and clamps for sand cast iron / centrifugally

cast (spun) iron pipes of diameter :

17.60 Providing and fixing trap of self cleansing design with screwed down or

15 hinged grating with or without vent arm complete, including cost of cutting

and making good the walls and floors: (F.T. + U.T.)

17.60.1.1 100 mm inlet and 100 mm outlet (Sand cast iron S&S as per IS: 3989

17.65 Painting sand cast iron / centrifugally cast (spun) iron soil, waste vent

16 pipes and fittings with paint of any colour such as chocolate, grey, or buff

etc. over a coat of primer (of approved quality) for new work:

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c

17 cutting and making good the walls etc.

6 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Providing, fixing and jointing UV stabilized uPVC rain water pipes

conforming to IS:4985 (working pressure 6 kg/sqcm.) including all

18 fittings such as bends, clamps, tees, cowls, clean out plugs etc including

Fixing at wall / ceiling level supported by s SFMC OR EQUIVALENT

(I) Single socketed pipes

M.R. Providing & fixing 100mm x 50mm G.I. waste with reducing elbow &

19 nipple cutting chases, the floor / slab, repairs complete as required and Each 32.00 32.00 1290.11 41283.38

connection to GI / CI waste pipe. JINDAL OR EQUIVALENT

M.R. Providing and fixing Heavy Class SS grating with of approved design

20 including setting in floor with cement motor to match with floor finish as Each 32.00 32.00 227.28 7272.82

per architect requirement . SIZE - 100 X 100 MM Jayna OR

M.R. Providing and fixing Heavy Class SS grating with Cockroach proof SS

strainer of approved design including setting in floor with cement motor

20 to match with floor finish as per architect requirement suitable for waster Each 100.00 100.00 447.01 44700.63

and FT. SIZE - 100 MM

DIA Jayna (RRG 102) OR EQUIVALENT

M.R. Providing and fixing G.I. EXTENSION PIECE for 100 mm dia floor

trap formed out of main pipe (Type A) with multiple side inlets, suitable

21 for various dia pipes, side connections, including all fixtures and fittings Each 100.00 100.00 1320.29 132028.59

as per site conditions and as per standard details and water tight sealing

of joints and area surrounding the grating and as directed. Jindal OR

M.R. Providing and fixing clean out plug comprising of GI socket caulked to

pipe and cast brass plug with suitable inlet key for opening male threaded

22 joint with GI class 'C' pipe & socket. Including lead caulked to CI pipes

complete as required.Jayna OR EQUIVALENT

7 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Providing and fixing cleaning eye on horizontal CI soil & waste pipes of

300 mm long GI medium class pipe with one plain end lead caulked in to

the collar of CI pipe and the other end with flange which in covered by

23 neoprene rubber gasket and blank flange, complete with nuts, bolts etc

and hot dip galvanization after fabrication to the satisfaction of Engineer

in Charge GMGR OR EQUIVALENT

SUB HEAD - III - (WATER SUPPLY)

18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This

1. includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

18.8.1 15 mm nominal outer dia Pipes Mtr 750.00 750.00 283.73 212795.10

18.8.2 20 mm nominal outer dia Pipes Mtr 370.00 370.00 311.47 115243.52

18.8.3 25 mm nominal outer dia Pipes Mtr 250.00 250.00 369.16 92290.02

18.8.4 32 mm nominal outer dia Pipes Mtr 150.00 150.00 443.87 66581.22

MR 40 mm dia nominal bore Mtr 100.00 100.00 496.05 49604.90

MR 50 mm dia nominal bore Mtr 20.00 20.00 748.79 14975.73

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c

cutting and making good the walls etc.

Internal work - Exposed on wall

18.10.1 15 mm dia nominal bore Metre 25.00 25.00 226.04 5650.89

18.10.2 20 mm dia nominal bore Metre 25.00 25.00 261.97 6549.36

18.10.3 25 mm dia nominal bore Metre 40.00 40.00 319.61 12784.52

18.10.4 32 mm dia nominal bore Metre 35.00 35.00 360.65 12622.69

18.10.6 50 mm dia nominal bore Metre 80.00 80.00 554.00 44320.23

M.R. 65 mm dia nominal bore Metre 60.00 60.00 779.91 46794.75

M.R. 80 mm dia nominal bore Metre 30.00 30.00 984.55 29536.59

M.R. 100 mm dia nominal bore Metre 15.00 15.00 1304.25 19563.75

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved

(screwed end) :

8 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two

4 coats over a ready mixed priming coat, both of approved quality for new

18.38.1 15 mm dia nominal bore Metre 25.00 25.00 10.09 252.20

18.38.2 20 mm dia nominal bore Metre 25.00 25.00 11.93 298.18

18.38.3 25 mm dia nominal bore Metre 40.00 40.00 15.71 628.40

18.38.4 32 mm dia nominal bore Metre 35.00 35.00 18.60 651.00

18.38.5 40 mm dia nominal bore Metre 230.00 230.00 22.07 5075.56

18.38.6 50 mm dia nominal bore Metre 80.00 80.00 26.01 2080.66

Derived 65 mm dia nominal bore

Derived 80 mm dia nominal bore

Derived 100 mm dia nominal bore

18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic

5 paint of approved quality :

18.40.3 25 mm diameter pipe metre 30.00 30.00 9.19 275.85

18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

M.R. BUTTERFLY VALVE WITH ON/OFF TYPE MOTORIZED ACTUATOR Single

phase 220V with limit switches, C I body & PN 16 pressure rating SS Disc

7 & shaft of Feedback, BMS Compatible for overhead tank filling as specified

duly insulated of following sizes as per specified AIP OR EQUIVALENT

M.R. 32 mm dia nominal bore Each 1.00 1.00 16368.71 16368.71

M.R. 40 mm dia nominal bore Each 1.00 1.00 16787.43 16787.43

9 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

M.R. Providing and fixing Nitrile Rubber Insulation 9 mm thick on hot water

8 supply/return pipes without outer mechanical protection SUPREME OR

15 mm dia. (9 mm thickness) Metre 50.00 50.00 82.98 4149.24

20 mm dia. (9 mm thickness) Metre 20.00 20.00 89.59 1791.89

25 mm dia. (9 mm thickness) Metre 10.00 10.00 100.91 1009.12

M.R. Providing & fixing full way lever operated forged brass ball valve of

brass body with forged brass hard chrome plated steel ball tested to a

9 pressure not less than 10 Kg / sqcm with threaded / flanged joints

complete with nuts, bolts, gaskets, washers ZOLOTO OR

M.R. Providing and fixing Butter fly valve with nitrile seat and stainless steel

stem with lever operation and cast iron body in powder coated finish,

10 suitable for test pressure of 10Kg/sq.mm) with flanges, gaskets and

necessary pad locking arrangement complet ZOLOTO OR

SUB HEAD - IV - (SEWERAGE AND DRAINAGE)

2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual

means over areas (exceeding 30 cm in depth 1.5m in width as well as 10

1 sqm on plan) including disposal of excavated earth, lead upto 50m and lift

upto 1.5m, disposed earth to be leveled and neatly dressed. (For Manholes)

2.10 Excavating trenches of required width for pipes, cables, etc including

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m, including getting out the excavated soil, and then returning the

2 soil as required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering, etc. and disposing

of surplus excavated soil as directed, within a lead of 50 m.

2.10.1.2 Pipes, cables etc. exceeding 80mm dia. But not exceeding 300mm dia. Metre 540.00 540.00 218.89 118200.58

2.11 Extra over for item no. 1.1 excavating trenches for pipes, cables etc. in all

3 kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over Metre 40.00 40.00 297.69 11907.61

corresponding basic item for depth up to 1.5 metre)

10 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff

4 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)

including testing of joints etc. complete:

19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10

5 graded stone aggregate 40 mm nominal size) alround S.W. pipes including

bed concrete as per standard design:

19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

6 graded stone aggregate 40 mm nominal size) up to haunches of RCC pipes

including bed concrete as per standard design :

19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with

C.I. grating brick masonry chamber with water tight C.I. cover with frame of

7 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg

and frame to be not less than 2.70 kg as per standard design:

19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

8 collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc. complete.

19.7 Constructing brick masonry manhole cement mortar 1:4 (1 cement : 4

coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size ), foundation concrete 1:4:8

mix (1cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal

9 size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making

necessary channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) finished with a floating coat of

neat cement complete as per standard design.

11 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

19.7.1 Inside size 90 x 80 cm and 90 cm deep including C.I. cover with frame (light

duty) 455 x 610 mm internal dimensions total weight of cover and frame to

be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

19.7.1.1 With F.P.S. bricks with class designation 7.5 Each 14.00 14.00 8939.50 125152.94

19.7.2 Inside size 120 x 90 cm and 90 cm deep including C.I. cover with frame

(medium duty) 500 mm internal diameter, total weight of cover and frame to

be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)

19.7.2.1 With F.P.S. bricks with class designation 7.5 Each 10.00 10.00 19235.05 192350.48

10 19.8 Extra depth for manholes

19.8.1.1 Size 90 x 80 cm (With With F.P.S. bricks with class designation 7.5) Metre 2.00 2.00 5924.85 11849.69

19.8.2.1 Size 120x 90 Cm (With F.P.S. bricks with class designation 7.5) Metre 2.00 2.00 7097.01 14194.01

19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS: 10910 on 12 mm dia steel bar conforming to IS :

1786 having minimum cross section as 23 mm x 25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm

space between protruded legs having 2 mm tread on top surface by ribbing

or chequering besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with stand the

bend test and chemical resistance test as per specification and having

manufacture's permanent identification mark to be visible even after fixing,

including fixing in manholes with 30 x 20 x 15 cm cement concrete block

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size) complete as per design.

19.27 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in

12 cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-

cast R.C.C. horizontal grating with frame complete as per standard design :

19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

M.R. Constructing brick masonry surface drain with bricks of class designation 7.5

in cement mortar 1:4 (1 cement : 4 coarse sand) including earth excavation,

10cm thick bed concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

stone aggregate 40 mm nominal size) and 25 mm thick cement concrete

1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 12.5 mm

13 nominal size) for filling haunches including 12 mm cement plaster 1:4 (1

cement : 4 coarse sand) with a floating coat of neat cement inside the

drain, its top and exposed side and 12mm thick external plaster with cement

mortar 1:6 (1 cement : 6 coarse sand) including connection to existing drain

and disposal of surplus earth.

30 cm drain 50cm average depth Metre 30.00 30.00 2068.14 62044.12

12 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

14 M.R. Extra for additional depth for brick masonry surface drain.

30 cm drain 50cm average depth 1.00 1.00 682.77 682.77

M.R. Supplying and fixing of Ductile Iron grating of 350 x 750 x 40 mm

(LXW),Bar Design, with Drainlock to suit the above channel, with inlet

15 section 1673 cm²/weighing 28.0 kg/unit for D 400 Load class according Each 30.00 30.00 10761.27 322838.22

to DIN EN 1433 complete in all respects as per manufacturers

specifications. FOR DRAIN COVER

SUB HEAD - V - EXTERNAL WATER SUPPLY

4.1 Providing and laying in position cement concrete of specified grade excluding

1 the cost of centering and shuttering - All work up plinth level (for thrust

4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

18.12 Providing and fixing medium grade G.I. pipes complete with G.I. fittings

including trenching and refilling etc. (external work)

18.12.3 25 mm dia nominal bore Metre 5.00 5.00 270.38 1351.91

18.12.5 40 mm dia nominal bore Metre 60.00 60.00 351.14 21068.29

18.32 Constructing masonry Chamber 30 x 30 x 50 cm, inside with 75 class

designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for

sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom

diameter and180 mm deep (inside) with chain lid and RCC top slab 1:2:4

3 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal

size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering

with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with

a floating coat of neat cement complete as per standard design.

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

18.33 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)

with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4

4 graded stone aggregate 20mm

nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1

cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per standard

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

13 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

18.41 Providing and filling sand of grading zone V or coarser grade alround the G.I.

pipes in external work.

18.41.3 25 mm dia nominal bore Metre 5.00 5.00 72.56 362.80

18.41.5 40 mm dia nominal bore Metre 60.00 60.00 75.40 4523.87

MR Providing, fixing, joints and testing in position the following UPVC Pipe

conferming to IS:4985 of 6kg sqcm for garden irrigation system cut to

6 required length pipe to be laid below level in trenches up to required

depth, including excavation & backfilling etc. all complete. SFMC OR

MR Providing & fixing in position 25 mm dia lawn hydrants consisting of 25

7 mm dia Ball valve, GI nipple and threaded hose receiver complete as Each 6.00 6.00 969.46 5816.78

required. ZOLOTO OR EQUIVALENT

SUBHEAD - VI - SUBMERSIBLE TRANSFER PUMPS

MR Supply, assembly, erection, testing and commissioning of SS submersible

non-clog pumps, having the following capacities with vortex impeller /

grinder type, complete with 3 phase squirrel cage submersible motor of

required HP for 415 ± 10% volts, 3 phase, 50 Hz. A.C. supply cooled by

1 surrounding liquid, submersible cable upto main panel within the plant

room, dry running preventor, G.I. guide pulling chain, all the necessary

piping and accessories, valves, delivery header etc. as required complete

in all respects. The rate will include electrical panel with cyclic operation

as supplied by the manufacturers)

The above installation shall be complete with sump pump lifting

assembly, ready made electro – galvanized MS lifting chain, GI pipe

header complete with discharge manifold, flanges, tee, elbow etc.

complete including GI pipe upto the top of sump and including GI union.

Header shall be sized for both pump working under delivery velocity of

Capacity of 100 lpm against a total head of 50 m (solid handling 5-8 mm)

(Domestic water transfer from UGT to OHT) (1 Working + 1 Stand by) Set 1.00 1.00 134497.52 134497.52

(SS Body and SS Impeller and shaft)

Capacity of 100 lpm against a total head of 50m (solid handling 5-8 mm)

(Flushing water transfer from UGT to OHT) (1 Working + 1 Stand by) (SS Set 1.00 1.00 134497.52 134497.52

Body and SS Impeller and shaft)

14 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

MR Supplying, assembly, erection, testing and commissioning of magnetic level

sensors and controllers, CPVC probe tube, PP actuating float and all other

equipment required for the performance of the system to the satisfaction of

2 the engineer in charge complete including providing and fixing wiring from

control junction box near the OH tank to probes of required length,

interconnection wiring between level controller and the concerned contactor

in the starter panel as required. The level controller will perform the following

To switch on the pumps of DOMESTIC TRANSFER PUMP AND FLUSHING

TRANSFER PUMP FOR OHT FILLING when the level of water in the supply

water tank is low and to cut off the pump when the level in the receiving

water tank is high and switch off the pumps when the level of water in the

supply water tank is low.

To indicate 5 levels of water in all tanks through a control panel with LEDs

To start the pumps in a cyclic order.

The system shall be complete to ensure automatic quotation of pump in

accordance to water level in respective tanks.

The Contractor will include all the over head tanks and all the pumps as

required for level control in this item

TOTAL CARRIED TO SUMMARY 310031.41

SUB HEAD - VII - (RAIN WATER HARVESTING)

2.8 Earth work in excavation by mechanical means (Hydraulic excavator)

/ manual means in foundation trenches or drains (not exceeding 1.5

m in width or 10 sqm on plan), including dressing of sides and

ramming of bottoms, lift upto 1.5 m, including getting out the

excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

2.26 Extra for every additional lift of 1.5 m or part thereof in excavation /

banking excavated or stacked materials.

4.1 Providing and laying in position cement concrete of specified grade

4 excluding the cost of centering and shuttering - All work up to plinth

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm

5.1 Providing and laying in position specified grade of reinforced cement

5 concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

15 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

5.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

5.9 Centering and shuttering including strutting, propping etc. and

removal of form for :

5.9.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.22 Steel reinforcement for R.C.C. work including straightening, cutting,

7 bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars kg 3159.52 3159.52 71.56 226101.86

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 50.00 50.00 4915.04 245752.07

9 13.1 12 mm cement plaster of mix :

19.16 Providing orange colour safety foot rest of minimum 6 mm thick

plastic encapsulated as per IS : 10910, on 12 mm dia steel bar

conforming to IS: 1786, having minimum cross section as 23 mmx25

mm and over all minimum length 263 mm and width as 165 mm with

minimum 112 mm space between protruded legs having 2 mm tread

on top surface by ribbing or chequering besides necessary and

adequate anchoring projections on tail length on 138 mm as per

10 standard drawing and suitable to with stand the bend test and each 27.00 27.00 327.44 8840.93

chemical resistance test as per specifications and having

manufacture’s permanent identification mark to be visible even after

fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) complete as per design.

19.19 Providing and fixing in position pre-cast R.C.C. manhole cover and

of required shape and approved quality 19.19.1 L D- 2.5

19.19.4. Circular shape 560 mm internal dia

16 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

24.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/

12 bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per

direction of Engineer -in-charge, upto 90 metre depth below ground

24.1.1 All types of soil

24.1.1.1 300 mm dia metre 407.10

24.2 Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/

13 bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per

direction of Engineer -in-charge, beyond 90 metre & upto 150 metre

depth below ground level.

24.2.1 All types of soil

24.3 Supplying, assembling, lowering and fixing in vertical position in bore

well, unplasticized PVC medium well casing (CM) pipe of required dia,

14 conforming to IS: 12818, including required hire and labour charges,

fittings & accessories etc. all complete, for all depths, as per direction

of Engineer-in-charge.

24.3.2 150 mm nominal size dia

24.4 Supplying, assembling, lowering and fixing in vertical position in bore

well unplasticized PVC medium well screen (RMS) pipes with ribs,

15 conforming to IS: 12818, including hire & labour charges, fittings &

accessories etc. all complete, for all depths, as per direction of

Engineer-in-charge.

24.4.2 24.4.2 150 mm nominal size dia metre 528.95

24.5 Supplying, filling, spreading & leveling stone boulders of size range 5

cm to 20 cm, in recharge pit, in the required thickness, for all leads &

lifts, all complete as per direction of Engineer-in-charge. cum 504.15

24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to

10 mm, in the recharge pit, over the existing layer of boulders, in

required thickness, for all leads & lifts, all complete as per direction of

Engineer-incharge.

17 NBCC (I) Ltd.

LECTURE COMPLEX- 2 - Plumbing IIT Bhubneswar

Ite DSR - Description of Item Unit Total Balance DSR Rate MR RATE at DSR-Amount MR-Amount

m 2014 Quantity Quantity at which which item

No Code No. in to be item was was awarded

Original executed awarded in in original

Tender at Risk & original tender

24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5

mm to 2 mm in recharge pit, in required thickness over gravel layer,

for all leads & lifts, all complete as per direction of Engineer -in-

24.8 Gravel packing in tubewell construction in accordance with IS: 4097,

including providing gravel fine/ medium/ coarse, in required grading

& sizes as per actual requirement, all complete as per direction of

Engineerin- charge.

24.9 Providing and fixing factory made precast RCC perforated drain

covers, having concrete of strength not less than M-25, of size 1000 x

450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos

20 cross sectional T.M.T. hoop bars, including providing 50 mm dia each 5.00 5.00 1009.02 5045.08

perforations @ 100 to 125 mm c/c, including providing edge binding

with M.S. flats of size 50 mm mm x 1.6 mm complete, all as per

direction of Engineer-in-charge.

24.13 24.13 Providing and fixing suitable size threaded mild steel cap or

spot welded plate to the top of bore well housing/ casing pipe,

removable as per requirement, all complete for borewell of:

24.14 24.14 Providing and fixing M.S. clamp of required dia to the top of

22 casing/housing pipe of tubewell as per IS: 2800 (part I), including

necessary bolts & nuts if required size complete.

24.14.2 150 mm clamp

24.15 Providing and fixing Bail plug/ Bottom plug of required dia to the

23 bottom of pipe assembly of tubewell as per IS:2800 (part I).

TOTAL CARRIED TO SUMMARY 1023429.35

18 NBCC (I) Ltd.

LECTURE COMPLEX-2-Electrical IIT, Bhubaneswar

SCHEDULE OF QUANTITIES FOR PROVIDING, INSTALLATION, TESTING & COMMISSIONING

OF DISTRIBUTION OF L.T. PANELS ETC. FOR LECTURE HALL-2, IIT BHUBNESWAR

SUMMARY OF COST

DSR Amount MR Amount

S. No. Item Description

1 SUB HEAD - I: MAIN PANEL - 774,109.04

2 SUB HEAD - II - UPS - 879,593.26

SUB HEAD - III- LT CABLES, RACE WAYS, CABEL TRAYS &

4 SUB HEAD - IV - Point Wiring 721,094.19 -

5 SUB HEAD - V -Distribution Board 257,637.60 -

6 SUB HEAD -VI - Light Fitting and Fans 151,439.70 13,854,168.48

7 SUB HEAD -VII - Data and TV points 123,903.91 24,121.21

8 SUB HEAD - VIII - EXTERNAL LIGHTING 18,494.78 909,049.00

9 SUB HEAD - IX - ADDRESSABLE FIRE ALARM SYSTEM - 7,025,768.05

10 SUB HEAD - X - CCTV SURVEILLANCE SYSTEM 386,629.99 10,265,532.00

11 SUB-HEAD - XII - LIGHTNING CONDUCTOR 29,684.13 -

TOTAL DSR + MR 36,004,043.65

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

SCHEDULE OF QUANTITIES FOR PROVIDING, INSTALLATION, TESTING & COMMISSIONING OF DISTRIBUTION OF L.T. PANELS ETC. FOR LECTURE HALL-2, IIT BHUBNESWAR

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

SUB HEAD - I: MAIN PANEL

Design, fabrication, supplying, assembling, erecting, connecting, testing and

commissioning of dust,damp and vermin proof free floor standing sheet steel

enclosed non-drawout moduler type LT Panel, fabricated out of suitable sized

angle iron and flats, base channel and covered with 2.0mm thick CRCA sheet,

duly painted complete with earth bus, aluminium bus bar, numbering & sign

writing, interconnection & including the cost of connection through bus bar /

copper conductor flexible connection with necessary interlocking with existing

panel as shown in drawing as per specification and mounted with the followings.

Trafo and DG incomers alongwith buscoupler shall be colour coded

compartment.The Panel shall have IP-54 rating of form-4.

1 Nos.630amps, 415V 4P MCCB '25ka' with overcurrent and short circuit TM

1 Set of three phase R,Y,B, ON indicating lamps, along with 2A SP MCB backup

Three phase and neutral Aluminium extensible type busbars rated at 415V, 800

amps capacity insulated with heat shrinkable coloured PVC sleeves.

Following rated 415V, MCCB's with overcurrent and short circuit releases, all

indication, front operating handle & door interlock with Multifunction Meter with

Volt, Amp and KWH etc. complete with RS Port in all respects as mentioned in

specifications and as required. For each outgoing:

160A, FP, 25KA, MCCB manually operated - 5 No.(1 for light power panel + 3

no. for Ventilation + 1 spare)

63A, FP, 25KA, MCCB manually operated - 10 No. ( 3 no. for AC +1 No. For Lift

Panel + 1 No. For Fire Fighting Panel + 1 external lighting + 1 UPS + 3 spare )

2 LIGHT POWER PANEL

1 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Design,fabrication,supplying, assembling, erecting, testing and commissioning of tender

wall mounted /floor mounted cubical type compartmentalised dust, damp &

vermin proof Light & power Panel fabricated out of suitable sized angle iron and

flats and covered with 2mm thick cold rolled CRCA sheet painting etc. complete

with Al. bus bars, interconnection with solid/stranded copper conductor wires

copper strips neutral links, etc. and mounted with with 1 No 0-500V, Voltmeter,

selector switch, 1 set (3 Nos) of phase indicating lamps, ammeter with CTs etc.

as required. The Panel shall have IP-42 rating .The Panel will also include

fabrication of dual energy meter box with space provision of single or three

phase Prepaid dual source type electronic energy Meter as per

Incoming/outgoing requirement or as per SLD with all necessary power wiring

for dual metering with MS support for meter fixing , windows for meter reading

inculding supply and fixing of MCB"s, main frame fabricated out of 2mm in

cubical formati Ho

1 Nos. 160amps, 415V 4P MCCB '25ka' with overcurrent and short circuit TM

1 Set of three phase R,Y,B, ON indicating lamps, along with 2A SP MCB backup

Three phase and neutral Aluminium extensible type busbars rated at 415V, 250

amps capacity insulated with heat shrinkable coloured PVC sleeves.

Following rated 415V, MCCB's with overcurrent and short circuit releases, all

indication, front operating handle & door interlock with Multifunction Meter with

Volt, Amp and KWH etc. complete with RS Port in all respects as mentioned in

specifications and as required. For each outgoing:

All outgoing feeders shall be provided with On indicating lamp with 2 A SP MCB

13 Nos. 63A 4P MCB with 10kA Breaking Capacity ( 12Nos. for Light & Power

4 Nos. 40A 4P MCB with 10kA Breaking Capacity ( 3 Nos. for Light & power DB

Metering Panel Described as above. Set 1.00 1.00 112256.36 112256.36

3 Lift Panel (2 lifts)

Supplying, assembling, erecting, connecting, testing and commissioning of dust,

damp and vermin proof wall mounting factory built sheet steel enclosed non-

drawout modular type Panel fabricated out of suitable sized angle iron and flats,

base channel and covered with 2.0mm thick PCRC sheet, duly painted complete

with earth bus, aluminium bus bar, numbering & sign writing, interconnection &

including the cost of connection through bus bar / copper conductor flexible

connection with necessary interlocking with existing panel as shown in drawing

as per specification and mounted with the followings.

2 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

1 No. 63 Amp 4 pole MCCB '25ka' with ON/OFF indicating lamp

1 Set of three phase R,Y,B, ON indicating lamps, along with 2A SP MCB backup

Digital flush type class - 1.0 accuracy Amp. Cum Volt meter showing V, A with 3

Nos. current transformers of suitable ratio, 10 VA Class 1.0 metering.

100Amps including in different sections of the panel for connection to various

outgoing feeders as per drawing.

a) 63 Amp 4P MCB '10ka' - 3 Nos.

b) 32 Amp DP MCB '10ka' - 2 Nos.

Lift Panel as above Set 1.00 1.00 64250.76 64250.76

Supplying, Installation, Testing and Commissioning of dust, damp and vermin

proof free floor standing / wall mounted factory built sheet steel enclosed

modular construction extendable panel, suitable for operation on 415 + 10%

volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square

tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of

1.6mm thick CRCA sheet, duly painted complete with aluminium bus bars,

interconnection with solid copper conductor wires / aluminium strips, neutral

links, earth bus etc. necessary metering protections & indications and mounted

with the following as per drawing and technical specifications attached etc.

complete as required.

1 No. of 63 Amp 4P MCCB of 25 kA Breaking capacity with On Indicating Lamp

with 2A SP MCB back-up.

100 Amp. 4P Al. Bus Bar

63A 4P MCB of 10kA Breaking Capacity - 4 Nos.

40A DP MCB of 10kA Breaking Capacity - 7 Nos. (6 for DB + 1no. Spare) Set 1.00 1.00 44242.78 44242.78

Total 774109.04

SUB HEAD - II - UPS

3 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Supply, Installation, Testing and Commissioning of (3 phase IN & 3 phase OUT) tender

UPS system suitable for input and output parameters strictly as per

specifications. The system shall be provided in powder coated fan cooled

enclosure painted in colour as per specifications. The system shall be suitable for

1 MR normal, emergency, recharge, by-pass and maintenance mode. The system be

expandable in such a manner that addition of another module of similar capacity

can double the system output with common by-pass. inverter shall have own

batteries with 15 minute battery back-up. System shall have a voltage range of

1.1 10 KVA UPS described as above Each 2.00 2.00 439796.63 879593.26

Total 879593.26

SUB HEAD - III- LT CABLES, RACE WAYS, CABEL TRAYS & EARTHING

Supply, laying, testing and commissioning of 1.1 kv grade XLPE insulated PVC

sheathed steel armoured alluminium stranded conductor ISI marked LT Cables

in trenches/ ducts/ through RCC pipes under roads/ on cable trays of following

1 MR sizes, complete all as specified (as per CPWD specifications for External Electrical

works), i/c clamping, dressing, earth work digging, sand filling, bricks protection,

back filling etc. as required & approved by Engineer's Incharge. (Tagging to be

provided with aluminium strips on both the ends as approved).

Supplying and making end termination with double brass compression gland and

2 9.1 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 kV grade as required.

4 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Supplying and installing following size of perforated pre-painted M.S. cable trays tender

with perforation not more than 17.5%, in convenient sections, joined with

3 4.1 connectors, suspended from the ceiling with M.S. suspenders including bolts &

suspenders etc as required..

3.1 4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Mtr 40.00 40.00 1173.79 46951.53

3.2 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Mtr 80.00 80.00 829.11 66329.02

3.3 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Mtr 150.00 150.00 546.44 81965.52

Supply, installation & testing of advance maintenance free Chemical Gel Earthing

of Dual Pipe Technology (GI) of 3mtr long 80mm dia of outer shell (MS) with the

50mm dia of inner shell (MS) of 80-100 microns galvanized earth electrode filled

with highly conducting metallic compounds with the permanent sealings at both

the ends with the lead terminal of 50 x 10mm size at the top along with 50 Kgs

4 MR of chemical mixture of Resistance Lowering Grounding Minerals. The loss on Set 2.00 2.00 20722.83 41445.66

ignition by mass of the chemical compound shall be less than 20%. The chemical

compound should be tested and certified by any International accredited and BIS

(Bureau of Indian Standards) accredited laboratory. The earth electrode shall be

duly tested & certified by CPRI (Central Power Research Institute), Govt of

India. The chemical earth electrode manufacturer shall be an ISO 9001: 2008 &

Supply, installation & testing of advance maintenance free Chemical Gel Earthing

of Dual Pipe Technology (GI) of 3mtr long 50mm dia of outer shell (MS) with the

25mm dia of inner shell (MS) of 80-100 microns galvanized earth electrode filled

with highly conducting metallic compounds with the permanent sealings at both

the ends with the lead terminal of 32x10mm size at the top along with 50 Kgs of

chemaical mixture of Resistance Lowering Grounding Minerals. The loss on

ignition by mass of the chemical compound shall be less than 20%. The

chemical compound should be tested and certified by any International

accredited and BIS (Bureau of Indian Standards) accredited laboratory. The

earth electrode shall be duly tested & certified by CPRI (Central Power Research

Institute), Govt of India for a minimum short circuit current of 30 KA rms. The

chemical earth electrode manufacturer shall be an ISO 9001:2008 & ISO

14001:2004 certified organization. The Earth pit should be covered with heavy

duty polyplastic weather proof chamber.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth

6 5.11 electrode including connection with G.I. nut, bolt, spring, washer excavation and Mtr. 80.00 80.00 442.40 35392.29

re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth

8 5.10 electrode including connection with G.I. nut, bolt, spring, washer excavation and Mtr. 80.00 80.00 1137.01 90960.71

re-filling etc. as required.

5 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for tender

connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing

along with existing surface/ recessed conduit/ submain wiring/ cable as required.

SUB HEAD - IV - Point Wiring

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm

FRLS PVC insulated copper conductor single core cable in surface / recessed

1 1.10.3 medium class PVC conduit, with modular switch, modular plate, suitable GI box Point 1560.00 305.00 544.34 166022.21

and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable

for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

4 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front

5 1.31 on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket Each 85.00 85.00 318.40 27064.38

outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front

6 1.32 on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A Each 166.00 166.00 415.08 68903.58

modular socket outlet and 15/16 A modular switch, connections etc. as required.

6 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Supplying and fixing of following sizes of medium class PVC conduit along with

7 1.21 accessories in surface/recess including cutting the wall and making good the

same in case of recessed conduit as required.

Supplying and fixing modular blanking plate on the existing modular plate &

switch box excluding modular plate as required

TOTAL 721094.19

SUB HEAD - V -Distribution Board

Supplying and fixing of following ways surface/ recess mounting, vertical type,

415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth

bar, din bar for mounting MCBs (but without MCBs and incomer) as required.

(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

Supplying and fixing following way, horizontal type three pole and neutral, sheet

steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature

4 2.10 circuit breaker suitable for inductive load of following poles in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

7 NBCC (I) Ltd.

LECTURE COMPLEX-2- Electrical IIT, Bhubaneswar

S. DSR DESCRIPTION OF ITEM Total Balance DSR Rate MR RATE at DSR Amount MR Amount (Rs.)

NO. 2014 Quantity Quantity at which which item (Rs.)

in to be item was was

executed awarded awarded in

Tender at Risk & in original

Cost original tender

Supplying and fixing following rating, four pole, 415 V, isolator in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral),

240 volts, residual current circuit breaker (RCCB),having a sensitivity current

6 2.14 upto 300 milliamperes in the existing MCB DB complete with connections, testing

and commissioning

etc. as required

Supplying and fixing single pole blanking plate in the existing MCB DB complete

etc. as required.

TOTAL 257637.60

SUB HEAD -VI - Light Fitting and Fans

Supplying of the following light fixtures complete with housing, reflectors, all

1 accessories i.e. copper wound Electronic ballast, HPF condensers, starters,

holders, hanging/fixing arrangements etc. complete as required

900mm CEILING FAN (Make Havells XP-390 / XP-390 Plus or Anchor Pansonic

FLO GS HS or equivalent Crompton, Orient, Usha)

1200mm CEILING FAN (Make Havells ES-50 Premium 5 or Anchor Pansonic

STILER PLUS ISI & 5 STAR or equivalent Crompton, Orient, Usha)

300 mm SWEEP EXHAUST FAN (1400 RPM) (Make Havells Turbo Force SP or

equivalent Crompton, Orient, Usha)

SITC of LED DownLighter body made of Die cast aluminium with heat sink.

Fixture should have IP20-IP44 with IK07 rating. Fixture dia should not be more

than 250 mm., Color temp. should be 3000/4000k, LED wattage should be

maximum 25W, Luman output should be minimum 2000lm, CRI is 80, Efficacy

1.4 MR 100 lm/W. Fixture should be available with LM79 & LM80 reports.Fixture should Nos. 720.00 720.00 7646.34 5505366.73

have reputaed LED like lumiled, cree or Nichia. Country of origin would be

required at the time of supply.Complete with brackets for recessed. As per