GE U(N) 62 2021 22 SPECIAL REPAIR TO BOUNDARY WALL AND DRAINAGE INCLUDING PROVISION OF CERTAIN DRAINS UNDER OF GE NORTH UDHAMPUR

Amount

M&L for taking down cement or cement lime plaster of any description from brick or stone walls/ceilings etc including raking out joints hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-charge.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.

M&L for dismantling posts or struts concrete brick work masonery etc (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engr-in-charge.

M&L for demolition of Concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and as directed by Engr-in-charge.

M&L for dismantling floor, heart or wall tiling including Cement Mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for dismantling stone slab and tiles of any description or any thicknes, complete all as specified and directed by Engr-in-Charge.

M&L for demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for taking down of steel gates /shutters of any description area exc 3.0 sqm but n exc 5.0 Sqm each complete all as specified and as directed by Engr-in-charge

M&L for excavation in trenches in any type of soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed by the Engr-in-charge.

M&L for excavation in trenches in soft / disintegrated rock not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, manholes, pier holes etc n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed by the Engr-in-charge.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed by the Engr-in-charge.

M&L for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed by the Engr-in-charge.

M&L for 15 mm thick rendering into two layers consisting 10 mm thick in CM 1:4 followed by 5 mm thick in CM 1:4 on fair faces of brick work or concrete surface including finished even and fair all as specified including 10mm wide grooves complete all as specified and directed by the Engr-in-charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint any colour white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

S & F mild steel framed work for ornamental and intricate design such as gate ,grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by the Engr-in-charge.

Mild steel bars TMT 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by the Engr-in-charge.

M&L for mild steel, 1.25mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by the Engr-in-charge.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engr-in-charge.

M & L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of zinc chrome primer complete all as specified and directed by the Engr-in-charge.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) for wall lining /steps window cills cooking plat forms (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by the Engr-in-charge.

M&L for rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed by the Engr-in-charge.

M&L for formwork to faces of walls fair finished surface of concrete, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed by the Engr-in-charge.

S & F mild steel work as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by the Engr-in-charge.

All as per srl item No.23 above but except steel

M& L for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified and directed by the Engr-in-charge.

M& L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified and directed by the Engr-in-charge.

M&L for Pre-cast cement concrete block type C-1 (1:3:6) using 20mm graded aggregate as in masonry with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and directed by the Engr-in-charge.

M & L pre-cast RCC 1 : 2 : 4, type B-1 (using 20 mm graded stone aggregate) in cover slabs for man holes with plain faces finished fair and smooth etc, set in CM I : 6 and including necessary formwork if required incl. demolition of old slabs complete all as specified and as directed by Engr-in-charge.

M&L for plain cement concrete type B0 1:2:4 (12.5mm graded aggregate) in surface channels and drains complete all as specified and directed by the Engr-in-charge.

M&L for plain cement concrete type B-1, 1:2:4 (Using 12.5 mm graded stone aggregates) for edging/coping /gola complete all as specified and as directed by Engr-in-charge.

M&L for plain cement concrete 1:2:4 type B2 (40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed by the Engr-in-charge.

M&L for reinforced cement concrete design Mix M25 using 20mm graded aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed by the Engr-in-charge.

M&L for 10 mm thick rendering CM 1:4 on fair faces of brick work or concrete surface including finished even and faircomplete all as specified and directed by the Engr-in-charge.

M&L for forming Jambs in cement mortar 1:4 or cement lime mortar 1:2:4, etc to openings (to forgoing item), incl cutting, toothing and properly bonding into old work, also facing jointing and pointing to match existing work, complete all as specified and directed.

M&L for making good under cills or over arches, lintels and breeummers incl all pinning when necessary as in Cement mortar 1:4, complete all as specified and as directed.

M&L for cutting holes into brick walls not exc 150 sqcm built in lime mortor or cement lime mortor and making good dismantal protion as in cement concrete 1:2:4, type B-I, complete as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and as directed.

M&L for brick work with sub class B old size bricks straight or curved on plan any radius in half bricks thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L for rendering 10mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in floor base of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (sqare/ rectanglear) area of each tile exc 0.11sqm but n exc 0.18 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces of wall of size 450mm x 300mm x 7 mm thick as approved pattern approved by GE, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in Cement mortar 1:4 as in skirting, dado, etc, complete all as specified and directed.

M&L for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

M&L for factory Made Solid PVC Moulded Door Shutterof wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet onback face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges, medium weight, and fixed, complete all as specified and as directed.

S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as dircted.

S&F 150 mm long aluminium handles, cast type, anodised and fixed, complete all as specified and as dircted.

S&F steel water tubing, medium grade, 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

M&L for cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3, for concealed water tubing etc and maing good, cutting exc 10cm and not exc 20 cm girth complete all as specified and directed.

S&F steel water tubing, medium grade, 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes complete all as specified and as directed by Engr-in-charge.

S&F ball brass valve 20mm dia high pressure with polythene float and fly nut complete all as specified and as directed by Engr-in-charge.

S&F gun-metal, globe or gate valves,20mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S&F PVC trap to 110mm bore including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and as directed.

S&F PVC soil, waste pipes,110mm dia in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F PVC soil, waste and vent pipes,110mm dia in any length with rubber ring joints, fixed to wall, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends(any radius) with duck foot or heel rest all as specified .

S&F PVC (SWR) 110mm bore junction single T equal or unequal complete all as specified and as directed. .

S&F in repairs PVC (SWR) vent cowl 110mm bore, complete all as specified and as directed.

S&F 110 mm (PVC) SWR pipes, laid and jointed complete with collars complete all as specified.

M & L for reinforced cement concrete pipes 900mm bore for septic tank, class NP2, laid and jointed in cement mortar 1:3, complete all as specified and as directed.

M & L for precast manhole cover suitable for 900mm bore RCC pipe and fixing flush to existing floor , complete all as specified and as directed.

S&F vitreous China urinals ivory colour, pedestal type, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) including aquisense sensor concealed type flushing valve for urinal for urinal complete set with installation box with control cock, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified and as directed by Engr-in-charge.

S&F vitreous china wash down water closet (pedestal pattern) ivory colour, of size 625 x 360 x 700mm complete, including seat cover, connection to drain pipe and to flushing pipe antisyphonage pipe etc, complete all as specified and as directed by Engr-in-charge.

S&F aquisense sensor faucet for wash hand basin with base flanges, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe suitable for 15mm bore, complete all as specified and directed. Make : Cera, Cat part No. F6010101 or equalvent in JAQUAR

S&F counter top vitreous China wash basin, ivory colour, oval type, size 600x400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets ,waste pipe, waste coupling CP brass, complete all as specified and directed.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges Fixed in repair complete all as specified and as directed.

S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long complete all as specified and as directed.

S&F angle valve, brass, chromium plated, fancy type, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection complete all as specified and directed.

S&F bib taps, brass, chromium plated, fancy type, long nose, with capstan head handle screwed down high pressure, including CP brass wall flanges; screwed for 15mm bore pipe connection complete all as specified and directed.

S&F health faucet, brass, chromium plated, with 1250mm long 15mm dia chrome finish flexible pipe with wall hook, fixed in repair complete all as specified and directed.

S&F jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection; for EWC fixed complete all as specified and as directed

S&F PVC flexible connections 450mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F PVC flexible connections 600mm long 15mm dia with brass flange nuts & washers complete all as specified & directed.

S&F stop valves, brass, fancy type with flange, chromium plated with long shank and cup (concealed type), screwed down high pressure, with capstan head handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass cromium plated screws,complete all as specified and directed.

S&F CP brass grating 100mm dia, centre hole,complete all as specified and as directed.

S&F CP brass grating 100mm dia, complete all as specified and as directed.

S&F toilet paper holder, brass, chromium plated, heavy duty, fixed with brass screw complete all as specified and as directed.

M & L for preparing old wall surfaces by scraping, using sand paper for smoothen surface to receive wall paper painting work on walls, including necessary fixing/ plasting over wall in a smooth manner, complete all as specified and directed by Engr-in- Charge.

Dismantling of aluminium / steel windows any description and fixed in any position including grill etc, complete all as specified and directed.

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors/partitions, windows (sliding), ventilators (louvers/fixed type) and fixed frame including aluminium grills, etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-In-Charge.(Note :- Rates includes for necessry roller for sliding and locking of sliding windows/ ventilator, etc)

S&F Stainless Steel Handles 100mm long Fancy type fixed with screws to window shutters complete all as specified.

S&F Powder coated Hinges 125mm long match with window shutters fixed to door shutters with screw complete all as specified.

S&F Powder coated Aluminium Towerbolt Hinges 150mm long match with windows shutters fixed with screw complete all as specified.

S&F 4mm thick printed colour PVC sheet/ACP sheet as in aluminium doors/ partitions fixing wirh rubber neoprene packing and powder coated aluminium beading, complete all as specified and as directed by Enge-in-Charge.

S&F 5mm frosted/ tinted sheet glass, ordinary quality and glazing with rubber neoprene packing for aluminium doors/windows in square/rectangular not exc 0.5 sq. m in each pane including powder coated aluminium beading, complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as dircted.

M&L for preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emulsion over a coat of alkali resistant cement based priming paint complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces and applying one coat of exterior emulsion on walls, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand complete all as specified and directed.

All as per Srl No. 92 above here n before but except tiles, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D1 (using 20mm graded stone aggregate) as in Sub base complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS cable with multistarned copper conductor medium grade ISI marked drawn into and inlcuding PVC concealed conduit with all accessories for one light/fan/bell point controlled by one switch with modular and also inlcuding 1.5 Sqmm continous earth wiire connected to common earth dolly complete all as directed.

M&L for modular metal flush box 4 moudle complete all as specified.

M & L for modular while cover plate with frame 4 module complete all as specified.

S&F modular switch one way 6 Amps 1 module type complete all as specified and as directed. Make Anchor Havells Schinider

S&F of decorative ultra slim linear LED lighting fixture 18/20 watt LED complete making all connnection using 1.5 sqmm copper conductor multistranded PVC insulated twin core fiexible cable from ceiling rose to fitting drawn through in PVC insulated twin cable flexble cable from ceiling rose to fitting drawn through in PVC flexible conduit of same colur to match with fittings/wall surface complete all as per dircted by Engr-in-Charge : Make SYSKA OR equivalent model of wipro and havells.

S&F of decorative ultra slim linear LED lighting fixture 10/12 watt LED complete making all connnection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core fiexible cable from ceiling rose to fitting drawn through in PVC insulated twin cable flexble cable from ceiling rose to fitting drawn through in PVC flexible conduit of same colur to match with fittings/wall surface complete all as per dircted by Engr-in-Charge : Make SYSKA OR equivalent model of wipro and havells.

M&L for sub main with copper conductor cable (2 runs of cable) multistaraned 2.5 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including cutting chasing and 2x2.5 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth duly complete all as specified and as directed.

Supply and fix sheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 4 way with 200 Amp rated bus bar with IP-43 protection. Make : Lagrand (Ekinoxe)/ Schiender (Acti-9)/Siemens (Betagard-8GB32) complete all as directed by Engr-in-Charge.

S&F MCB SPN 40 to 60 Amps, 240 Volts, 'C' Curve complete. Make : Indoasian/Legrand (DX3)/ Schneider (Acti-9)/Siemen (Betagard-5SL4) complete all as directed by Engr-in-Charge.

S&F MCB SPN 6 to 32 Amps, 240 Volts, repturing capactiy 10KA 'C' Series. Make : Indoasian/Legrand (DX3)/ Schneider (Acti-9)/Siemen (Betagard-5SL4) complete all as directed by Engr-in-Charge.

S&F ceiling rose surface bakelite type 65x50mm three terminals complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 300m complete all as directed by Engr-in-Charge MAKE bajaj, phillips, havells

M/S GURU DEV BUILDERS

P N Constructions

NARESH KUMAR KHAJURIA

kerni electricals

M/S Inderjit Sharma and Co.

KALSOTRA CONSTRUCTION CO

new hi tech engineers and contractors

Bansal and Sons