Restoration of damaged street lights in main market Pahalgam

Providing, fixing and retrofitting 50W LED lighting arrangement inside existing decorative/ornamental lantern, including removal of unserviceable components, thorough cleaning of lantern housing, supply and installation of high-efficiency LED strip/module with separate electronic driver, mirror reflector and SPD, duly secured within the lantern frame to ensure uniform illumination, making all necessary electrical connections to the existing circuit, testing and commissioning of the complete system, all in accordance with manufacturer’s specifications and relevant IS standards, including labour, materials, scaffolding, tools and plants, and providing a minimum two-year warranty after commissioning, complete in all respects as per direction of the Engineer-in-Charge.Complete Job

Supply, installation, testing and commissloning of 60A 4P Connector of Legrand/ Havells/ L&T/ eq. make to be approved by EIC in the junction box complete with necessary connections.

Wiring for Circuit along with earth wire in FRLS PVC insulated 660/1100 volt grade flexible stranded copper conductor wires in recessed or surface conduiting system, excluding cost of conduits. (Havells/ Polycab/ Finolex/ Anchor/KEI/RR or equivalent).

2x 2.5 sq mm

Supply, laying, connecting and commissioning of 16 sq mm 4 core XLPE/ PVC Insulated and steel armored 1.1 KV grade Aluminum LT cable for Service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground) (Havells/Polycab/KEI/ eq. make to be approved by EIC)

Providing and laying in position cement concrete including curing but excluding the cost of shuttering and centring with 1:1.5:3 (1 cement, 1.5 Coarse sand, 3 Graded stone aggregate 20 mm nominal size).

Repairing, fixing and commissioning of 15 kVA three-phase Servo Stabilizer, including replacement/repair of servo motor, two-phase auto system,3 No. Voltmeters, 60A DP relay, and all other damaged components. All spare parts used shall be of standard make and ISI marked. The work shall be carried out as per direction of the Engineer-in-Charge and shall include testing and commissioning at site. The stabilizer shall be handed over in fully operational condition and shall carry a minimum one-year warranty after commissioning. All dismantled unserviceable materials shall be handed over to the intending department.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench with soft excavated earth making the surface level but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing 1½ inch (40 mm) PVC pipe , ISI marked, type C, including cutting, threading where required, fixing with approved clamps, making necessary bends, tees, sockets, elbows and other accessories, including making good the wall/floor surfaces after installation, testing for leakage and ensuring proper alignment, complete in all respects including cost of materials, labour, and tools & plants, as per direction of Engineer-in-Charge.