Replacement of shed and repairs of plaster/internal painting of Pilot Plant including suitable flooring of Pilot Plant at CSIR-CFTRI Resource Centre, Lucknow.

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos sheet.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Chiselling/Tacking of floor at reqd. interval for making rough for proper bonding with of tiling including disposal of rubbish up to dumping ground with in 50m lead as directed.

Dismantling of existing marble dado/ skirting including removal of unserviceable material up to dumping ground within a lead of 50 mtr. as directed.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix ::1:6 (1 cement: 6 fine sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster.

Providing and fixing 10 mm thick acid and/or alkali resistant heavy duty industrial vitrified tiles of approved make and colour laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 mm.

Repair of damaged RCC ceiling, chajja/beams bottom surface/wall surface including chipping manually of loose portion of concrete upto a depth 5 to 10mm behind/around the reinforcement bars the area shall be cleaned with rust remover (Rebaklens RR) followed by epoxy based Zinc Primer (Nitrozine Primer). The surface should be primed with Nitrol EP and Epoxy based bonding agent. The damaged portion should be repaired with Micro concrete and Rendroc RG mixed with 6mm down gauge stone aggregate in proportion 25% of micro concrete followed by the plaster of polymer modified mortar (PMM) 1:3 as per manufacture’s specifications (3 Litre polymer per 50 Kg bag cement). The job will be completed to entire satisfaction of Engineer In-Charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Two or more coats.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Note:- Rates should be quoted inclusive of all Taxes, GST etc.

harpal singh

M/S ANOOP CONSTRUCTION

M/S AVADH TRADERS

Pranav Kumar