Construction of Barkuli and Adjoining Villages Rural water supply scheme District- Khunti on turnkey basis under D.W. AND S. Division, Khunti

Amount

Intake Well With Pump House

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Intake well with Pump house all complete job. (Please refer to Section 5,Sl. 2.1 & 2.1.1 of SBD)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc as per designed section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same( beyond 50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 M as per specification and direction of E/I.

Initial Lift

Extra for earthwork in all kinds of soil for each additional lift of 1.0 M or part of there of over the initial lift of 1.5 m as per specification and direction of E/I .

1st Lift

2nd Lift

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator intake well and outlet etc. as per designed section in ordinary rock or soft rock (Vide classification of soil item-C) with disposal of soil (beyond 50M. from the edge of the trenches) with initial lead of 150M. and lift of 1.5 M. as per specification and direction of E/I. ( Soft rock where blasting is required and approved by the concerned Chief Engineer)

2nd Lift

3rd Lift

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M15

Plain/Reinforced cement concrete, in well foundation complete as per drawing and technical specification RCC M30 Grade Case I Using concrete mixer

Plain/Reinforced cement concrete, in well foundation complete as per drawing and technical specification RCC M30 Grade Case I Using concrete mixer

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 . Using Concrete Mixer , For T-beam & slab, 25-35% of (a+b+c) Height above 10m M-250

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 . Using Concrete Mixer , For T-beam & slab, 25-35% of (a+b+c) Height above 10m M-250

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M25 Using Concrete Mixer for T-beam & slab 25-35% of (a+b+c) Height above 10m M-250

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 . Using Concrete Mixer , For T-beam & slab, 25-35% of (a+b+c) Height above 10m M-250

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 . Using Concrete Mixer , For T-beam & slab, 25-35% of (a+b+c) Height above 10m

Providing 63 mm average thickness RCC M-200 with nominal mix of (1:1.5:3) in chhajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3 including making drip course in concrete, screening, centering, shuttering, mixing cement concrete in mixer and placing in position , vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chhajja with sand of FM 1.5, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/I.

Providing Tor steel reinforcement of 10 mm, 12 mm and 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Supplying fitting and fixing fully glazed steel door window or ventilators of standard rolled Z and mullion section and sizes as per I.S.-1038 joints met and welded with 100x16x3 mm MS lugs fixed in cement concrete 1:2:4 blocks 15x10x10 cm size including cost of oxidized iron fitting with hinges, handle per step, catch springs 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs of 20 mm long G.I. counter sunk machine screw and nuts and applying a coat of red lead paint, carriage to work site hoistingand placing in position in all storey and taxes all complete as per building specification and direction of E/I.

Supplying and Fixing rolling of approved size and make made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454 Part 1 and M.S. top cover of required thickness for rolling shutters.

Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick water proof cement plaster(1:3) with clean coarse sand of FM 1.5 with 5% cico or any other approved water proofing compond including screening, curing, carriage with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling of P/H & jack well with clean coarse sand of FM 1.5 including screening, curing with all leads and lift of water, scaffolding taxes and royalty all complete as per building specification and direction.

Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing two coats of painting with ready mixed paint of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding & taxes all complete as per building specification & direction of E/I.

Providing R.S. Joint ISMB 250 x 125 mm size fitting and fixing in possion including cutting to required in shape and size, its carrage applying a primer coat of red lead paint etc. all complete job and direction of E/I. (Below roof slab for base of V.T. pump)

Providing and fixing M.S. Sluice Gate in Position -do-do-

Providing and fixing M.S. rose Piece in Intakewell -do-do-

Supplying laying fitting and fixing 25 mm dia G.I. pipes of medium class railing well lengths of approved make is three rows each passing through 50x50x6 mm thick M.S. angle at 1.5m C/C and additional post of every snowcem add painting 3 coats full paint over. One coat of aaticornssive paint of approved colours add shade including cost of all labour, transporting, beats to curve shape etc. all complete job.

Providing and Fixiing in position C.I. Type dapuri steps of 22 mm dia M.S. bar Step with proper anchorage etc. and providing and applying 3 coats of ant- corrosive paint etc. complete as directed by Engineer in charge.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete.

Cement 08 KM lead

Steel 08 KM lead

Sand 08 KM lead

Bricks 10 KM lead

Stone/Stone Chips 15 KM lead

Construction of Gang Way 70 M long and 3.0 M wide

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of RCC Gangay . etc. all complete job.(Please refer to Section 5,Sl. 2.2 & 2.1.1 of SBD)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc as per designed section in all kinds of soil including moorum soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 M as per specification and direction of E/I.

Plain/Reinforced cement concrete, in well foundation complete as per drawing and technical specification Well steining PCC M15 Grade

Plain/Reinforced cement concrete, in well foundation complete as per drawing and technical specification RCC M30 Grade Case I Using concrete mixer

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M 30 Using Concrete Mixer Height 5m

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M25 Using Concrete Mixer Height 5m to 10m

Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25 . Using Concrete Mixer , For T-beam & slab, 25-35% of (a+b+c) Height above 10m

Providing Tor steel reinforcement of 10 mm, 12 mm and 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing, with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification & direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling of P/H & jack well with clean coarse sand of FM 1.5 including screening, curing with all leads and lift of water, scaffolding taxes and royalty all complete as per building specification and direction.

Providing & Fixing G.I. Pipe Railing having 1.0 m height consisting 50 x 50 x 6 mm thick M.S. Angles as verticals at 1.5 m c/c, and additional poles at every corner with three rows of 25 mm dia G.I. pipes of medium class variety as horizontal & painting three coats of oil paint over 1 coat of anticorrosive paint of approved colour & shade including cost of all labour, transporting bends to curved shape, etc. complete.

Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading, unloading transportation are complete .

Cement 08 KM lead

Steel 08 KM lead

Sand 08 KM lead

Stone/Stone Chips 15 KM lead

Mechanical & Electrical Work at Intake well to Proposed WTP

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority and Raw water pumping Machinery discharge of 1000 LPM against a total head of 70 M (1W +1S) with all complete job (Please refer to Section 5,Sl. 2.4 of SBD for detailed specification )

Raw water Pumpsets:- Supplying, installing & commissioning of water lubricated, single/ double stage, Radial/ Mixed flow, Vertical Turbine Pump of Kirloskar/ WPIL / Jyoti /Mather & Platt make confirming to IS: 1710/1972, consisting of bowl assembly dynamically balanced bronze impellers, stainless steel pumpshaft and line shaft of 18.5 m flanged column assembllies of 1.5 m length and with 9 mm thick MS fabricated column assembly, with strainers, prelubrication tank, Non reverse ratchet coupling, pressure gauge, foot Valve with dismantling joint at delivery/Suction side of Pump ; coupled with hollow/ solid Vertical shaft squirrel cage TEFC and Eff1 rated induction Motor having 20% more BHP than that of pump, of Kirlosker/ Jyoti / BHEL/ CGL /ABB Marathon make confirming to IS: 325/1996 & IS: 12615/2004, operating on 415 V, 3 Phase, 50 C/S, A.C Supply having speed 1500 rpm all complete as per standard specification and direction of E/I. Note- Contractor will again have to check the design of pump & Motor and get it approved by the depertment.

Discharge 1000 LPM, Head = 70 M and BHP = 30

Starter : Supplying and errecting , assembled fully automatic star delta starer in a provided cubical panel to operate squirrel cage induction motor working on 380 - 440 volt , 3 phase 50 hz with no volt coil overload relay and ON OFF push buttons with necessary materials and connected to supply etc. all complete. (make :- Jyoti/ L&T/ABB/Siemens/schneider/C&S.) for 30 H.P.Motor

Supply, Installation and Commissioning of Power control cum distribution cubical panel board (LT Panel), made of 2 mm thick, MS sheet of suitable size, dust and vermin proof consisting of following accessories

a) Incoming feeder- 100 A TPN 415V MCCB with thermal release range, adjustable and breaking capacity with rotary operating mechanism handle of make L&T/SIEMENS/Jyoti/Schneider/C&S- 1no.

b) Outgoing feeder- 80 A TP 415V MCCB having thermal release range, adjustable and breaking capacity with rotary operating mechanism handle of make L&T/SIEMENS/Jyoti/Schneider 2no. and 1no. Spare feeder.

c) Bus Bar- 4 pole 160A 415V Copper strip bus bar enclosed in MS sheet, etc. all complete job- 1no.

f) Indicating lamp LED - L&T/SIEMENS make in Red, Yellow and Green colour- 1set.

g) 32A MCB for light load of L&T/SIEMENS/Jyoti/Scheider/C&S make- 2no.

h) APFC panel of required KVAR with LT capacitor banks in standards stages with reactor coils for raising PF from 0.80 to 0.98, etc. all complete. Including motor control relays, earth fault relay, over/leakage current relay,etc. all other safety relays.

Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including all type of relays with internally wired with suitable size of copper control wire/cable, etc. all complete. As per site requirement and IE rules.

Supplying , laying and suitably terminating both ends with following cables:-

(a) Cost of 50 Sq.M.M. x 3.5 core XLPE Aluminum armoured 1.1K.V grade cable including laying on cable tray along gangway from DP structure to Stablizer to LT Panel in the Intakewell pumphouse.

(b) Cost of 10 Sq.M.M. x 3.0 core XLPE 1.1 K.V grade solid/ stranded un armoured copper conductor with 6 mm thick cable including laying on wall/floor from LT Panel to Starter & Motors.

Chain Pulley Block- Providing, erecting triple spur gear type Chain Pulley Block suitable for 3Tcapacity with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. Etc all complete as per Site requirement.

Lighting-Supplying and doing electrical wiring and internal and external lighting i.e. lighting of gangway and ESS for Raw water plant with LED luminaries as required and as per direction of E/I. Including fire Extingster & First aid Box.

Supplying and erecting approved make lightening arrestor suitable for with necessary ancillary material complete on provided cross arm etc all complete as per site Requirement & IE rules.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masanory enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc. with charcoal/ coke and salt as required. (for Motors & stablizer)

Supplying , laying and suitably terminating both ends with following cables:-

Supplying , laying and suitably terminating both ends with following cables:-

Supplying , laying and suitably terminating both ends with following cables:-

Discharge = 950 LPM, Head = 35 M and BHP 15.00

FASD STARTER : Supplying and errecting, assembled fully automatic star delta starter, in a provided cubical pannel to operate squirrel cage induction motor working on 380 to 440 volts, 3 phase, 50 Hz with no volt coil, overload relay and ON OFF push buttons with necessary materials and connected to supply etc. all complete. (make :- Jyoti/ L&T/ABB.)Siemens/ C&S.)

For 15.00 BHP

Supply, Installation and Commissioning of Power control cum distribution cubical panel board (LT Panel), made of 2 mm thick, MS sheet of suitable size, dust and vermin proof consisting of following accessories suitable for Scada System..

a) Incoming feeder-100 A TPN 415V MCCB with thermal release range, adjustable and breaking capacity with rotary operating mechanism handle of make L&T/SIEMENS/Jyoti/schneider/C&S. 1no.

b) Outgoing feeder- 63A TP 415V MCCB for 415V MCCB for pump -2nos. And 63A TP 415V MCCB for APFC 1 nos having thermal release range, adjustable and breaking capacity with rotary operating mechanism handle of make L&T/SIEMENS/Jyoti/ schneider/C&S - 3no. and 1no. Spare feeder each.

c) Bus Bar- 4 pole 100A 415V copper strip bus bar enclosed in MS sheet, etc. all complete job- 1no.

f) Indicating lamp LED - L&T/SIEMENS make in Red, Yellow and Green colour- 1set.

g) 32A/63A MCB for light load other load of L&T/SIEMENS/Jyoti/schneider/C&S make- 3no.

i) APFC panel of required KVAR with LT capacitor banks in standards stages with reactor coils for raising PF from 0.80 to 0.98,etc. all complete. Including motor control relays, earth fault relay, over/leakage current relay,etc. all other safety relays.

Panel should be duly painted with two coats super enameled paint of approved colour one coat of red oxide primer and including all type of relays with internally wired with suitable size of copper control wire/cable, etc. all complete.

(a) Cost of 50 Sq.M.M. x 3.5 core XLPE Aluminum armoured 1.1K.V grade cable including laying on cable tray from DP structure to LT Panel in the Clear Water pumphouse.

(b) Cost of 10 Sq.M.M. x 3.0 core XLPE 1.1 K.V grade solid/ stranded un-armoured copper conductor with 6 mm thick cable including laying on floor from LT Panel to motors.

Chain Pulley Block- Providing, erecting triple spur gear type Chain Pulley Block suitable for 1Tcapacity with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. Etc all complete as per site requirement.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masanory enclosure with cover plate having locking arrangement and watering pipe of 2.7 m long etc. with charcoal / coke and salt as required.

Supplying and erecting approved make lightening arrestor suitable for with necessary ancillary material complete on provided cross arm etc all complete as per site requirement & IE rules.

Raw Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw water Rising Main (Please refer to Section 5,Sl. 3.1.10 of SBD)

Detailed longitudinal survey along alignment of pipeline, investigation, soil testing, site cleaning, strip leveling and drawing L section showing specials like air valve, scour valve, sluice valve and getting the design of pipe line verified and getting approval of department and doing the following work done:-

Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(For soil item B)

Earthwork in excavation of foundation trenches as per design section in ordinary or soft rock ( where blasting is not required) and disposal of excavated materials so obtained (50 M away from the edge of the trenches ) with initial lead of 10 M and initi

Earth work in back filling the trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-9 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and out side zinc coating with bituminous paint including all other taxes insurance carriage to work site with loading Unloading etc stacking including inspection charges and all taxes all complete.

150 mm dia

Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all taxes, etc. complete as per I.S. 9523 but excluding frieght.

Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I./DI S/S tyton pipes (class LA) trenches supplying Without rubber gasket and making gasket joints including providing night guard ,barrier and red light to safe guard against accident, all complete and laying of pipes is to be done as per (I.S.S. 3114-1985)as per design, specification and direction of E/I.

150 mm dia

Providing Double Flanged Sluice valve confirming for I.S. 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. (without byepass)

150 mm dia

Supplying Labour and tools for fixing C.I./D.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587– 1972 and nuts and bolts confirming to I.S.S. 1364 -1983) including drilling holes in flanges if required as per specification and direction of E/I.

150 mm dia

Providing and supplying air valves as per I.S. - 14845-2000 and M J P’s standard specifications of approved make and quality of following diameters including all taxes (central and local), railway freight, inspection changes, unloading from railway wagons, loading into truck, transportation upto departmental storer/ site, unloading and stacking etc. complete. air valve single ball flanged/ ScrewedType PN 1.6 (25 mm dia)

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc. complete (for all class of valves).Air valve single ball

25 mm dia

Supplying Labours, tools and tackles for testing of laid C.I./DI or U.P.V.C. or H.D.P.E. or D.I. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I.

150 mm dia

labour charge for one cutting cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

150 mm dia

Construction of B.W. masonry valve chamber of size 1.20 x 0.90 x 1.50 mt. as per enclosed annexure no. 1

Supply all materials & construction of Thrust Block where required as per enclosd annexure no. 2

11.25° Horizantal Bend 150 mm dia

22.5° Horizantal Bend 150 mm dia

45° Horizantal Bend 150 mm dia

90° Horizantal Bend 150 mm dia

Carriage of Pipe 300 K.M. DI K-9 150 MM

Water Treatment Plant

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Un Conventional WTP of 1.40 MLD capacity. With all complete job. (Please refer to Section 5,Sl. 2.3 of SBD)

Cost of 1.40 MLD Water Treatment Plant

Estimate of Boundary wall for WTP / ESR Campous (276.40 M)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD)

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item- A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.

Providing, coarse clean sand in filling in foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. Qnty. Same as Item no.13

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I 1.00% of RCC work Total RCC= 5.15X1.00%X7.85

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I 1.00% of RCC work Total RCC= 1.09X1.00%X7.85

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , taxes all complete as per drawing specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit ,loading ,unloading , transportation, etc. all complete .

Cement 08 KM lead

Steel 08 KM lead

Sand 08 KM lead

Bricks 10 KM lead

Stone/Stone Chips 15 KM lead

Clear Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Clear water Rising Main (Please refer to Section 5,Sl. 3.1.10 of SBD)

Detailed longitudinal survey along alignment of pipeline, investigation, soil testing, site cleaning, strip leveling and drawing L section showing specials like air valve, scour valve, sluice valve and getting the design of pipe line verified and getting approval of department and doing the following work done:-

Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(For soil item B)

Earthwork in excavation of foundation trenches as per design section in ordinary or soft rock ( where blasting is not required) and disposal of excavated materials so obtained (50 M away from the edge of the trenches ) with initial lead of 10 M and initial lift of 1.5 M as specification and direction of E/I.

Earth work in back filling the trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-9 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and out side zinc coating with bituminous paint including all other taxes insurance carriage to work site with loading Unloading etc stacking including inspection charges and all taxes all complete .

150 mm dia

Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all taxes, etc. complete as per I.S. 9523 but excluding frieght.

Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I./DI S/S tyton pipes (class LA) trenches supplying Without rubber gasket and making gasket joints including providing night guard ,barrier and red light to safe guard against accident, all complete and laying of pipes is to be done as per (I.S.S. 3114-1985)as per design, specification and direction of E/I.

150 mm dia

Providing Double Flanged Sluice valve confirming for I.S. 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. (without byepass)

150 mm dia

Supplying Labour and tools for fixing C.I./D.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587– 1972 and nuts and bolts confirming to I.S.S. 1364 -1983) including drilling holes in flanges if required as per specification and direction of E/I.

150 mm dia

Providing and supplying air valves as per I.S. - 14845-2000 and M J P’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seting on moulded seat ring, inlet face and drilled, including all taxes (central and local), insurance, third party inspection charges, loading, unloading, transportation upto departmental storer/ site, etc. complete. (25 mm dia)

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including costof conveyance from store to site of work, costof all material and giving satisfactory hydraulic testing etc. complete (for all class of valves). Air valve single ball (25mm dia)

Supplying Labours, tools and tackles for testing of laid C.I./DI or U.P.V.C. or H.D.P.E. or D.I. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I.

150 mm dia

labour charge for one cutting cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

150 mm dia

Construction of B.W. masonry valve chamber of size 1.50 x 1.20 x 1.50 mt. as per enclosed annexure no. 1

Carriage of Pipe 300 K.M. DI K-9 150 MM

Elevated Service Reservoir

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and equipment for designing & construction of ESR all complete job. (Please refer to Section 5,Sl. 2.8 of SBD)

ESR 3.60 Lakh Litre capacity with 24 Meter staging

DISTRIBUTION MAIN

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main (Please refer to Section 5,Sl. 3.1.10 of SBD)

Detailed longitudinal survey along alignment of pipeline, investigation, soil testing, site cleaning, strip leveling and drawing L section showing specials like air valve, scour valve, sluice valve and getting the design of pipe line verified and getting approval of department and doing the following work done:-

Earth work in excavation(as per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.(For soil item B)

Earthwork in excavation of foundation trenches as per design section in ordinary or soft rock ( where blasting is not required) and disposal of excavated materials so obtained (50 M away from the edge of the trenches ) with initial lead of 10 M and initial lift of 1.5 M as specification and direction of E/I.

Earth work in back filling the trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Providing and Supplying in Standard Lengths Polythene pipes confirming to I.S. 4984 /14151/12786/13488 with necessary jointing material like mechanical connectors i.e. thread / insert joint/quick release coupler joint compression fitting joint or flanged joint including all local & central taxes transporation & frieght charge inspection charges loading/ unloading charges conveyance to the departmental store/ site & stacking the same in closed shade duly protecting from sunrays & rains etc complete. PE-100 8 kg/sq.cm

Add Extra for 5% for H.D.P.E P Pipe

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-7 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and out side zinc coating with bituminous paint including all other taxes insurance carriage to work site with loading Unloading etc stacking including inspection charges and all taxes all complete .

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing and supplying ISI standard D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including ED, CST, all taxes, etc. complete as per I.S. 9523 but excluding frieght.

Lowering , laying and jointing of HDPE Pipe by heating to the endsof the pipes with the help of teflon coated electric mirror/ heater to the required temperature and then pressing the end together againest each other to form a monolithic and leak proof joint by thermosetting process. the pressing may be required to be done with hydraulic jacks/ Butt Fusion machine etc. complete with all materials labour as directed by E/I including giving satisfactory Hydrauli test.

Supplying labours, tools, tackles, lubricant etc. for laying and jointing C.I./DI S/S tyton pipes (class LA) trenches supplying Without rubber gasket and making gasket joints including providing night guard ,barrier and red light to safe guard against accident, all complete and laying of pipes is to be done as per (I.S.S. 3114-1985)as per design, specification and direction of E/I.

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Providing Double Flanged Sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete . (without bypass) with E.D

100 mm (Scour valve)

Providing, installing and giving satisfacory field testing of flanged ends Bulk water meter horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50 ^0 C temperature duly sealed againest tempring complete with Flange at both ends and confirming to class B as per ISO 4064 along with manufacturesr test certificate and guarantee certificate, including cost of all materials and labour etc with OMIL. MID Certificate for abroad meter and FCRI for india including 36 months guarantee etc Complete .

300 mm dia

Supplying Labour and tools for fixing C.I./D.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587– 1972 and nuts and bolts confirming to I.S.S. 1364 -1983) including drilling holes in flanges if required as per specification and direction of E/I.

65 mm Dia Sluice Valve

80 mm Dia Sluice Valve

100 mm Dia Sluice Valve

150 mm Dia Sluice Valve

200 mm Dia Sluice Valve

250 mm Dia Sluice Valve

300 mm Dia Sluice Valve

100 mm Dia Scour Valve

Supplying Labours, tools and tackles for testing of laid C.I./DI or U.P.V.C. or H.D.P.E. or D.I. or A.C. pressure pipe upto 60 metre head of water all complete as per specification and direction of E/I.

150 mm dia

200 mm dia

250 mm dia

300 mm dia

labour charge for one cutting cast iron pipe and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

63 mm dia

75 mm dia

90 mm dia

110 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Construction of B.W. masonry valve chamber of size 1.50 x 1.20 x 1.50 mt. as per enclosed annexure no. 1

Carriage of Pipe 300 K.M.

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Twin Type Staff Quater

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Provision of twin type Staff Quarter etc. all complete job.(Please refer to Section 5,Sl. 2.7 of SBD) - 1 Unit

E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item-A ) & disposal of excavated earth as obtained to a distance upto 50 M including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design ,building specification and direction of E/I.

Providing ,coarse clean sand in filling in foundation trenches or in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials ,labour ,royalty & taxes all complete as per building specification & direction of E/I.(mode of measurement compacted volume)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C. M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade - III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer & placing in position, vibrating, striking, curing, taxes & royalty all complete as per building specification & direction of Engineer-in-charge.

Providing designation 75 A brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 25 mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M.2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with 5 % cico or any other approved water proofing compound and placing in position, striking, curing ,taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, scaffolding, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C.M - 150 with nominal mix of (1:2:4) in lintel with approved quality of stone ships 20 mm to 6 mm. size graded & clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering ,mixing cement concrete in mixer & placing in position vibrating, striking, curing (but excluding the cost of reinforcement), taxes & royalty all complete, as per building specification and direction of E/I.

Providing average 63 mm thick R.C.C.M-150 with nominal mix of (1:2:4) chajja with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M. 2.5 to 3 including making drip course in concrete, screening ,centering, shuttering & mixing cement concrete in mixer & placing in position vibrating, striking, 6 mm cement plaster (1:4) in ceiling & sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification of E/I.

Providing R.C.C. M- 200 with nominal mix of (1:1:5:3) in roof slab with approved quality of stone ships 20 mm to 6 mm. size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete, as per building specification & direction of E/I.

Supplying, fitting & fixing good quality, well dressed & well seasoned sal wood work in chaukhat in doors, windows, skylights, fanlights and C/W celestial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of the E/I.

Supplying fitting and fixing 250 x 20 x 6 mm L-type M.S. Clamp properly fish tailed, including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I.

Supplying fitting & fixing 38 mm thick good quality well dressed and well seasoned Sal wood battened shutter ledged & braced in doors and windows with oxidized iron fitting such as hinges, sliding door bolts, tower bolts, handles or rings, hooks and eyes, cleats, sand block as per schedule, taxes & royalty all complete as per building specification & direction of Engineer – in - Charge.

Supplying, fitting & fixing M.S. Grill made of 20 x 6 cmm M.S. Flat as per approved design & drawing properly fabricated with Joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per the building specification and direction of E/I. (where materials is not supplied by the Deptt.)

Providing 25 mm thick precast R.C.C. M-150 with nominal mix of (1:2:4) jali with approved quality of stone chips of 6 mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S. wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing, scaffolding and finishing all complete as per building specification and direction of E/I.

Providing and fixing fan hook of 16 mm dia M.S. bar 1 meter long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where material is not supplied by Deptt.)

Supplying fitting and fixing M.S. grill gate with M.S. grills made of 20 x 6 mm M.S. flats or 16 mm M.S. square bars fitted on 25 x 25 x 6 mm M.S. Angle frame of size 60 x 60 x 6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling of P/H & jack well with clean coarse sand of FM 1.5 including screening, curing with all leads and lift of water, scaffolding taxes and royalty all complete as per building specification and direction.

Providing 12 mm thick cement plaster (1:6) for inside & cut safe surface of P/H with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm. cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads & lifts of water, scaffolding, taxes and royalty all complete as per building specification & direction of E/I.

Filling in foundation trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and find dressed with earth obtained from excavation of foundation trenches within a lead of 50m and lift of 1.5 m all complete as per building specification and direction of E/I.(Mode of measurement compacted volume)

Providing average 150 mm thick dry rammed khoa beaten to 112 mm. (compacted with water) made of well burnt or jhama bricks including ramming properly till compacted thickness is achieved, curing & carriage of water with all leads, making proper slope & blending the top with cement mortar (1:10) all complete as per building specification & direction of E/I.

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes & royalty with all complete as per building specification & direction of E/I.

Providing designation 75 A brick on edge flooring in cement mortar (1:4) with top surface flush pointed in cement mortar (1:4) with approved quality of sand including the cost of curing, taxes, royalty all complete as per building specification and direction of E/I.

Providing two coat snowsem of approved shade and make over a coat of cement prime on new surface including preparing the plastered smooth with sand paper scaffolding ,curing and taxes all complete as per building specification and direction of E/I.

Colour Washing two coats over a coat of white wash over new surface with approved quality of lime including cost of cleaning surface thoroughly and removin the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification & direction of E/I.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (mode of measurement area shall be multiplied by the coefficient as indicated in building specification).

Providing two coats of painting with ready mixed paint of approved shade & make over steel surface including cleaning the surface thoroughly, scaffolding & taxes all complete as per building specification & direction of E/I.

Providing Tor steel reinforcement of 10 mm, 12 mm and 16 mm dia bars as per approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete . .

Cement 08 KM lead

Steel 08 KM lead

Sand 08 KM lead

Bricks 10 KM lead

Stone/Stone Chips 15 KM lead

Stone Metal 12 KM

(B) Water Supply and Sanitation Installation (Plumbing Work) -

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and irection of E/I. (510mm.long with 12.5 Liter low level PVCSystem).

Septic Tank and Soak Pit

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

19 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

B/W in C.m (1:4)

B/W 75-B in (1:6) for soak pit

Brick work in dry (1:8) masonry for soakpit

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

Supplying fitting and fixing HEI. Pipe/ HEI fitting of approved make including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

100 mm dia HEI Band

100 mm dia HEI Band

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

Cement 5 KM lead

Sand 15 KM lead

Stone chips 30 KM lead

Bricks 30 KM lead

Steel 5 KM lead

Electrical Works

Wiring for light point with 1.5 sq. mm pvc insulated multi stand copper conductors cable on surface pvc casing capping as required

Short point

medium point

long point

Wiring for fan point with 1.5 sq mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required long point

Wiring for 5 pin 5 amp. plug point with 1.5 sq. mm pvc insulated M/S copper conductors cable on surface pvc casing capping including P/F 5 pin 5 amp. socket outlet and 5 amp. switch earthling the 3rd pin etc as per required.

Wiring for 3 pin 15 amp. plug point with 4 sq. mm pvc insulated M/S copper conductor cable on surface pvc cashing capping including P/F 3 pin 15 amp. switch socket combined earthling the 3rd pin as required Extra long point

Wiring for circuit wiring with 2x2.5 sq, mm pvc insulated M/S copper conductor cable on surface pvc casing capping as required.

Wiring for sub main with 2x 10 sq. mm pvc insulated M/S copper conductor cable on surface pvc casing capping including connections as required.

S/F 32 amp. hush type D.P switch including connection etc as required.

S/F 32 amp. main switch fuse unit including holes on the band connection and earthling the body as required

S/F batten or angle holder complete including connection etc. as required

S/F twin twisted flexible wire for connection of tube light and fan as required.

S/F following size sun mica sheet cutting and fixing under switch socket

S/F indicator light as required

S/F fuse on the board as required

S/F earthling with earth plate 600 x 600 x 30mm thick with masonry enclosures on the top as required

Extra for wiring salt and charcoal for copper earthling as required.

S/F bulk head fitting suitable for 100 watt lamp as required.

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

S/F bulk head fitting suitable for 100 watt lamp as required.

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

House Connection (1578 Nos.)

Providing installing and giving satisfactory field testing of Domestic Water Meter ,horizontal inferential multijet type with magnetic drive and dry dial suitable for ambient 50⁰ C Temperature duly sealed against tampering complete with couplings at both ends and conforming to class B as per IS 779/1994 (VI Revison ) with ISI mark Along with manufacturer's test certificate including cost of all materials and labour. 20 mm Dia

Earth work in excavation in foundation trenches in hard soil vide classification item-B and disposal of excavated earth as obtained to a distance upto 50 m including all lifts,levelling,ramming the foundation trenches,removing roots of trees,shrubs all complete as per approved design,building specifications and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labours , royalty and taxes all complete as per building specification and direction of E/I.(mode of measurement compacted volume)

Providing P C C M-150 in nominal mix of (1:2:4)in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M2.5 to 3 including screening shuttering , mixing cement concrete in mixer and placing in position ,vibratig, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Earth work in back filling the trenchage after laying different type and size of pipes with earth removed during excavation within initials leads and lift as per specification and direction of E/I

Providing 12 mm thick cement plaster (1:3) with clean coarse sand of F.M 1.5 with 1.5 mm thick cement punning over it including screening, curing, with all leads and lifts of water,taxes and royalty all complete as per building specification an direction of E/I.

Providing and supplying Blue MDPE pipes confirming to ISO 4427:1996 manufactured from virgin resin PE 80 food grade compounded raw materials having blue colour only assurance certificate from quality agencies like WRC/CIPET (India) / DVGM / KIWA/SPGN etc for usage in drinking water with quality system. The cost shall include testing of all materials all taxes central, state, Municipal, Inspection charges transportation up to site ,transit insurance, loading, unloading, stacking etc complete as specified and directed.PN16(SDR-9) with ED. 20 mm Dia pipe

Providing and supplying G.I. pipes (Tata and euivalent make) for usage in drinking water with quality system. The cost shall include testing of all materials all taxes central, state, Municipal, Inspection charges transportation up to site ,transit insurance, loading, unloading, stacking etc complete as specified and directed. 15mm Dia

Lowering laying and jointing HDPE/MDPE pipes in proper position including all specials by compression fitting / electrofusion and But fusion jointing procedure including hydroulic testing as per relevent IS code complete with all materials for jointing procedures like Electrofusion machine , electric mirror/heater/ But fusion welding machine with hydroulic jack,top loading clamp etc pump and accessories for hyroulic tesing and all labours as directed by E/I.as per IS-7634 part-2. 20 mm Dia Pipe

Supplying labours and tools for fixing G.I.Pipes with red lead and yarn of following nominal bore with screwed and socketed joints on wall ,ceiling and floor including supplying and fittings of wall hooks or pipe clamps ,wooden plugs, cutting pipes to size and threading ends if required etc all complete as per specification and direction of E/I. 15 mm Dia Pipe

Supplying and fixing of G.M. ferrule of approved make in existing C.I/D.I main including drilling and taping C.I./D.I main all complete as per specification and direction of E/I. 3 mm dia Ferrule Weight not less than 425 Gm

Providing and fixing of G.M. Fullway valve of approved quality all complete as per specification and direction of E/I. 20 mm Dia and weight not less than 400 Gm

Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. 15 mm Dia and weight not less than 400 Gm

Supplying and fixing G.I.fitting of approved make all complete as per specification and direction of E/I.

20 mm dia ELBOW

15 mm dia ELBOW

20mm dia Reducing socket

20mm dia Nipple

15mm dia Nipple

20mm dia Union Socket

15 mm dia Socket

20mm dia socket

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 8 KM lead

Sand 8 km lead

Stone chips 15 km lead

Coffer Dam & Dewatering

Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious / semimpervious materials on both side of B.C. soil (in gunny bags if required) including ramming , compacting to satifaction of Engineer-in-charge, till the completion of work including dismantling coffer dam after completion of works and disposing off material as directed by the Engineer-in-charge.

Coffer Dam Intake Well

Coffer Dam Gangaway

Coffer Infiltration Gallary

Dewatering Intake Well

Dewatering Gangway

Dewatering Infiltration Gallary

Infilteration Gallery

Earthwork in excavation of foundation trenches of toe wall Spillway head regulator , outlet ,intake well etc. as per a designed section in all kinds of soil, including moorum soil, soil mixed with kankar, pebbles and boulders up to 300 mm size and disposal of the same (beyond 50 M away from the edge of the trenches) with in initial lead of 150 M all lifts of 1.5 M as per specification and direction of E/I.

Extra for Earth work in all kinds of soil for each additional lift of 1.0 m or part there of over the intial lift of 1.4 as per specification and direction of E/I /.

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS8329/2000 in standard lengths of class K-9 suitable for push on joint (Rubber Gasket jointing) with cement mortarlining on inside surface and outsite zinc coating with bituminous paint including all ot her taxes insurance carriage to work site with loading Unloading etc. stacking including inspection charges and all taxes all complete 300 MM DI K7

Carriage of DI pipes upto 300km (Dia-300mm)

Supplying labours,tools , tackles, lubricant etc. for laying and jointing C.I.S/S tyton pipes (class LA) trenches supplying rubber gasket (Rubber gaskets confirming to I.S.S.-5382-1969 ) and making gasket joints including providing night guard ,barrier and red light to safe guard against accident, all complete (Pipe to be supplied departmentally free of cost and laying of pipes is to be done as per (I.S.S.3114-1985)as per design,specification and direction of E/I

150 mm dia v-wire Screen

300 mm dia

Earthwark in filling foundation trenches or back filling of masonry structures with suitable earth in layers not exceeding 150 mm thick well watered rammed and fully compacted and finally dressed with earth obtained from excavation of foundation trenches and kept at a lead of 30 m and initial lift of 1.5 m complete as per specification and direction of E/I

Design and Supply of Apollo V- wire screenlaterals Suitable for Infiltration Gallery as per site condition and detail provided. End connection – Suitable flange Diam. – 06 inch (150 mm) I.D.=153 mm O.D. =167 mm Screen thickness=07 mm Slot – 1.00 mm MOC:-Low Carbon Galvanised Steel Length :- 5 Mtr.

Providing, lowering, laying & placing in position shrounding material for porpow pipe gallery/slotted pipe gallery trench gallery with all leads & lift in volved screening & washing of material & placing in position with given section etc. comp. as directed by Engineer in change.

40 mm Pebbles

12 mm to 20 mm pebbles

Approach Road

Construction of embankment with approved material obtained from borrow pit with a lift upto 1.5 m transpoorting to site spreading grading to required slope and compacting to a meet requirement of tables 300.1 and 300.2 with a lead up to 1000m as per technical specification clause 301.5

Construction of granular Sub Base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavetor at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification Clause 401. (i) For Grading I Materials.

Construction of Un-reinforced dowel jointed at expansion and construction joint only, plain cement concrete pavement , thickness as per design , over a prepared sub base, with 43 grade cement or any type as per clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:38 maximum sizes of coarse aggregate not exceeding 25 mm, mixed inn a concrete mixer of not less than .2 cum capacity and appropriate weigh batcher using approvd fixed side formwork (steel channel, laying including levelling the formwork as per drawing) spreading the concrete with shovels rank, compacted using needle scrreed and plate vibrator and fixed in continuous operation including provision of contration and expansion, construction joints applyong debonding strips , primer, assealant, dowel bars near approaches to bridges/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days. Using curing compound (where specified) and water finishing to lines and grade as per drawing and techical specification Clause 1501

Proving and laying boulder apron for bed protection with stone boulders of minimum size and weight as per table 1300.1, no. fragment weighing less than 25 kg laid dry complete as per drawing and technical specification Clause 1301.

Cement 8 KM lead

Sand 8 km lead

Stone chips 15 km lead

Boulder 12 KM

Metal 12 KM

Road Restoration Work

Supplying tools and cutting road as well restoring the same as per specificat i o n a n d direction of E/I a) Pucca Road (Except Black top only taken out material to be used) for cutting road as per requirement.

Water Bound Macadum road (taken out material will be used) for cutting road as per requirement.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 meter lead and disposal of un-serviceable materials with all leads all complete as per direction of E./I.

Providing P.C.C. M -150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Establishment of Simple SCADA

.Doing Survey, Collecting field data, designing aesthetically, getting it approved by competent authority and Provision of Establishment of Simple SCADA etc. all complete job.

PLC SYSTEM AT WTP PLC with GSM facility to communicate to Central Location with Panel and its Accessories RTU SYSTEM AT RAW WATER INTAKE RTU with GSM facility to communicate to Central Location with Panel and its Accessories RTU SYSTEM AT ESR RTU with GSM facility to communicate to Central Location with Panel and its Accessories SCADA in CENTRAL CONTROL ROOM: 1. Prove SCADA software Suite with Unlimited tags license- 1nos. 2. Ethernet Cables (20 meters) & Ethernet Switch for SCADA Communication- 1 nos. 3. GSM Modem for Communication- 1nos. 4. VPN concentrator for Communication with RTU units -1 nos. 5. Router

Operation & Maintenance for Five years

O/M work with Labour component & Chemical Cost for 1st Year Detailed in SBD of section of 9.10

O/M work with Labour component ,Materials for 2nd Year component & Chemical Cost repairing of pipe line work, pumping ,civil, electrical and Mechanical cost Detailed in SBD of section of 9.10

O/M work with Labour component ,Materials for 3rd Year component & Chemical Cost repairing of pipe line work, pumping ,civil, electrical and Mechanical cost Detailed in SBD of section of 9.10

O/M work with Labour component ,Materials for 4th Year component & Chemical Cost repairing of pipe line work, pumping ,civil, electrical and Mechanical cost Detailed in SBD of section of 9.10

O/M work with Labour component ,Materials for 5th Year component & Chemical Cost repairing of pipe line work, pumping ,civil, electrical and Mechanical cost Detailed in SBD of section of 9.10

Labour Cess 1%

SWATI COMPRESSORS ENGINEERS

HUMMINGBIRD INFRATECH PVT LTD