Installation and commissioning of Lattice Mast communication tower and providing network communication for live steaming at different weigh bridges and central control room, Chamatu under Magadh OCP, M-S Area

Amount

Category : 6 UTP Out Door Solid copper cable Conductor : Conductor : 23 AWG (Solid)Conductor Meta : Conductor Meta : Bare Copper Insulation Material : HD-PE OD : 6.1mm ±0.2 Resistance Unbalance : 5% Max Capacitance Unbalance : 330pF / 100m Delay Skew : <45nS

Cat6 patch cord , 3Mtr length .

Single mode optical fiber cable 6F,HFRR Jacket with Attenuation before cladding less than 0.20 dB/km after cladding 0.22db/km, Zero Dispersion Wavelength 1300 to 1324 nm, zero dispersion slope ≤0.092 PS/nm2 km, PMD (Polarization Mode Dispersion) ≤0.2 PS/√km, Cable Cut-off Wavelength (λcc) ≤1260 nm, Macro bending Loss (100 turns; Ф50 mm) @1550 nm ≤ 0.05 db. Cladding Diameter 125 ±1μm And Proof stress ≥0.69Gpa

Ethernet Gigabit Media Converter, Pure Networking Copper to Fiber Media Converter - 10/100/1000BASE-TX to 1000BASE-LX Singlemode SC, 1310-nm, up to 20-km, (1) RJ-45; (1) pair of SC, MEDIA SUPPORTED CATx UTP/STP; Single-mode fiber (8.3/125 µm, 9/125 µm, 10/125 µm) DISTANCE CATx: 328 ft. (100 m), SM fiber: 12.4 mi. (20 km),

Fiber patch cord SC-SC single mode 2 metér simplex , suitable for data communication, and telecommunication applications. with terminated oonnectors ih 6ssemblies are designed to and are compatible with iřidustry standards (EIATIA, IEC, ANSI, NTT and Telcordia

Splice closure for OFC Cable

9U Network rack Rack Enclosure , Material used CRCA Steel for outdoor fixing at Tower

Supply of 2.5 sqmm 2 core flexible copper cable

Splicing/ jointing of Fiber Optic Cables with Splice loss of fiber with MFD 9.3um with fiber of range 8.8~9.6um, Core-Clad Concentricity in today’s G.652 single mode fibers is <0.5um.and offset is in opposite directions (total 1um offset), the contributed loss will be 0.056dB.

Self supported Lattiees mast/communication tower 18 Meters (60 feet) ,Triangular Latticed Aerial Mast,Number of Sections 6 for 60 feet Mast, Wind speed 0-120 KM/H, Material GI Pipe, Minimum yield strength, Three support legs ,Hot dipped Galvanized.

Dismantling of Latice Mast Communication Tower 18 mtr

Installation of Latice Mast Communication Tower 18 mtr

Foundation for latties mast/ communication tower providing and |laying in position reinforced cement concrete 1:2:4 (I cement: 2 Coarse: 4 stone aggregate 20mm nominal size) in foundation of pumps. Dg set etc, including form work etc ,as required (excluding reinforcement (4 X 1.75 cum)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor,single core cable in surface/ recessed medium class PVCconduit as required 2 X 1.5 sq. mm + 1 X 1.5.5 sq. mm earth wire

Erection / commissioning charge @ 15% on item no.1 to 8

Total impact of GST for the purpose of CTC

M/S ASHOK ENTERPRISES

M/S MEHTA ELECTRONICS