Renovation of Cuttack Sale Depot of Sambalpuri Bastralaya at Cuttack.

Amount

CIVIL WORKS :

Dismantlling of existing brick partition walls, Tile/CC floor etc with clearing & disposal of debrices to the dumping site etc complete as directed by Engineering in-charge.

Providing two coats of enamel paint to the existing rolling shutter including greasing for smooth running of the shutter etc complete with cost of all labour and materials.

INTERIOR WORKS :

DisplayRacks Providing and fixing display racks of 2400mm ht. various sizes in proper position of shelves as per approved design (32mm, 450mm depth, side thickness 100mm) with lower drawer system made up of fire retardant ply board and block board of Century/Archid/ Greenply /sonear make, exposed member as per drawing to be finished with 1mm thick laminate of approved make (Marino/Greenlam/Hidesign) and shade and design. The inner unexposed will be finished with 0.8 mm thick laminate and 12mm glass shelves of approved make including all fittings & fixtures complete as direction of Engineer in-charge.

Display Cum sales Counter Providing and fixing 750mm width X 900mm height display counters with side support made up of 19mm ply, 12mm glass table top, side glass and front glass as specified in the drawing of various sizes in proper position, made of 19mm fire retardant ply of Century /Archid / Greenply / Sonear make Exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design. The inner unexposed will be finished with 0.8mm thick laminate complete in all respect as per the direction of Engineer-in-charge.

Reception and cash Counter Table Providing and fixing in proper position, curved shape reception table of 2100 mm X 750mm made of 19mm BWP ply with drawers shelves and shutters make in 12/19mm ply as specified in the drawing drawers to be mounted on telescopic channels provision for key boards cable manager, auto hinges handle and drawer locks, exposed member as per drawing to be finished with 1mm thick laminate of approved make and shade and design with 12mm thick frosted glass on the top as per design. The inner unexposed will be laminated and complete in all respect as per the instruction of Engineer in charge

Display Boxes :

Providing and lfixing in proper position, display boxes, made of 12mm glass as per approved design for display and hanging of hndloom items with cost of all labour & materials with manqueen complete as per direction of Engineer in-charge

Chairs/Stools :

a. Customers stools of any reputed make like Godrej/Methodex :

b. Chair for Cash Counter of any reputed make like Godrej/Methodex :

GYPSUM FALSE CEILLING:

Providing & fixing gypboard suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework(Gypsteel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gypboard(MR) screw fixed to ceiling section as per design, complete with fixing and finishing of tapered and square edges of board with jointing compound paper tape with 2 coats of plastic emulsion paint over suitable primer of Berger/ Asian paint make including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

CLEAR GLASS FIXED PARTITION/ GLASS DOOR : Providing and fixing of 12mm toughened glass fixed partition/door fixed to the floor ceiling and wall by patch fittings/Wall connecting profile base rail with fixing holes incl. clamping parts with screws and gasket for 12 mm glass with cover profile on both sides. This is also inclusive of providing pattern with stickers, sealant, lock etc. as per the detail design and specifications direction of Engineer in-charge.

FLOORING (Vitrified Flooring) :

Providing fitting & fixing of double charge vitrified tiles to flooring and skirting of size-600mX600mm of Kajaria/Johnson/Nitco make, flush jointing with approved shade grout, admixture of pigment same as colour of the tile including of all cost of labour material. T&P as per the detail design & specification as per the direction of Engineer in charge

Aluminum composite panelling with alluminum frame work covering with 3mm exterior grade aluminum composit panel of approved make finished in all respect with cost of all materials, labour, scafolding etc complete as per direction of Engineer in-charge.

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/vinear/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge.

Signage

Supply fitting fixing of digital sign board of approved design and lighting system with all cost of material and labour etc. to be provided on the front and back side facet to match the elevation of the building in position as per direction of Engineer in Charge.

INTERNAL ELECTRICAL WORKS.

Supply of all required materials and recessed(concealed) wiring to proposed light points/fan/exhaust fan/call bell points with 2(1x1.5sqm.) PVC insulated 1000v grade FRLS copper were run inside 19 mm PVC conduit pipe of 14 SWG or flexible conduit pipe laid on surface concealed in wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS copper were as earth continuity conductor fixing of 6A-240V modular type switch and complete in all respect including with use of clip-in- type modular plates, boxed, switches, ceiling roses, junction boxes with Bakelite cover as specified and making good to the damages caused and complete as per direction of EIC.

i) Primary light points :

ii) Secondary light points

Supply of all required materials & recessed wiring to 2/3 pin clip-in modular type 5 Amp plug socket points with 2(1x2.5 sqm)PVC insulated 1100 V grade stranded single core FRLS copper wire run inside 19mm PVC conduict (14SWG) pipe laid concealed in surface wall/ceiling alongwith 1(1x1.5sqm) PVC insulated FRLS Copper wire as earth conti8nuity conductor and complete in all respect including 5 pin 5A sockets switches, plates, boxes and cover as specified and making good to the damages caused and complete with all respect as per the direction of Engineer in charge.

a) Separator

Supply of required materials & recessed wiring to clip-in modular type 5pin 16/6 Amp plug socket with 16 A SP switch on surface of wall including the modular boxes switches with indicator plates, screws and complete in all respect including making good to the damages caused and as per direction EIC.

Supply of all required materials and recessed wiring to circuit/sub-mains with following number & sizes of PVC insulated FRLS 1100v. grade standard copper wire run inside 19mm PVC conduct(14SWG) pipe laid on surface of wall/ceiling and copper wire as earth continuity conductor and complete in all respect including making good to all damages caused and as per the direction of EIC.

Recessed wiring with 2(1x1.5sqm)+1x(1x1.5sqm)copper wire for looping purpose and for AC IDU.

Recessed wring with 2(1x2.5sqm)+1x(1x1.5sqm) copper wire from LDB to SB, and computer point.

Recessed wiring with 2(1x4sqm)+1x(1x2.5sqm) copper wire from LDB to individual 16 Amp socket.

PANNEL & DISTRIBUTION BOARD.

Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of 2 mm thick CR sheet metal cubicle fixed on m.s. channel base, duly acid treated for dusting, primered and painted with 2 coats of powder coating of approved shade dust, damp & vermin proof. Having hinged door and compartmental arrangement for each equipment & busbar chamber on the top of the panel running horizontally having provision for cable conduit entry earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS and as per special conditions of contract making good the damages caused complete as per the direction of EIC.

Floor Distribution Board(Main) (As per site condition)

Branch Distribution Board, 4 way TPNDB (Double Door), Incoming (40 Amp TPN RCBO – 1 No, Outgoing – 16/32 A SP MCB – 12 Nos.

FITTING & FIXTURES :

Supply, delivery, installation, testing and commissioning of the following fittings/fixture complete with all required accessories and lamps on wall/ceiling as per the direction of EIC.

36/18 watt LED of approved make (Jaguar/Philips

Track Light

Supply fitting of wall mounting speed fans of approved make.

Supply,Installation,Testing , Commissioning of VRF 2 ton Capacity Celling mounted Cassette AC of approved make with all required fittings complete

Providing & Fixing of 2 KVA Invert of any reputed make like USHA/Microtek etc.Including 2 nos Exide Make Battery of required capacity and its accessories.

Providing & Fixing of 2 KVA Voltage Stabilizer of any reputed make according to requirment of the site.

Music System

Providing music system to the showroom including fixing of speakers etc

Odinix High Quality 6 watts 103mm dia Ceiling speakers

Ahuja 160 watts Amplifier with Remote and USB Port

Volume Control 6 watt

System installation, testing and commissioning charges

CCTV Surveillance System

16 Channel Real Time Standalone DVR with D1 Resolution on all 16 Channels @400tps, HDMI Port, lH264 Hardware Compression, with 16 video inputs, capacity for installing 2 SATA Hard disks, back up through Disk array and USB Network support with static and dynamic IP. Real time viewing make Crystal.

Night vision camera with 1/3” Sony Super HAD CCD, 1000 TVL resolution, 15 IR LEDs, 15 Mtr IR range, 3.6m IR lens Dome Camera make Crystal.

Samsung LED Monitor 22”

System installation, testing and commissioning charges

Fire Extinguishers

Provision for fire extinguishers of approved make to be placed in required position as directed by Fire Authority / Engineer in-charge.

Rabinarayan Das, Proprietor of Nilachakra Enterprises