Reconstruction of ICDS Centre at Kovil Medu, VOC Centre No.416 in Ward No. 42 , West Zone

Amount

Dismantling of existing damaged RCC Slab including all labours charges as per the direction of the departmental officers etc., completed.

Dismantling the existing damaged Brick work in cement morter including all labours charges as per the direction of the departmental officers. Etc., Complete.

Earth work excavating and depositing on bank for building foundation works with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification. DATA

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC footing, plinth beam etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Conveyance of surplus earth from the site from 0 to 15km including transport loading and unloading etc., complete.

Fly ash Brick work in cement mortar 1:5 mix (one cement five sand) using II class ground molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Supplying and fixing of 40mm thick Cuddapah Slabs in position in cub boards, Racks, Platform in all floors etc., Double side polishing including all cost etc complete..

Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest andfilling all round the closet using 20mm broken brick jally in 10cm thick andplaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification

S/F of RCC Ornamental jolly as per direction of departmental officers etc., complete.

Supply and fixing of mild steel window Grill using all round 12 mm square rods as vertical and horizontal bracings with necessary side support with flats and angles and casting flowers etc , with necessary locking arrangements including cost and conveyance etc

Supply and fixing of mild steel door using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc

Plastering with cement mortar 1:3:10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Paving the floor with Granite Slab (super fine polished with machine cut edges) of sizes 1.2m x 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the marble slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete. For Jet Block Colour

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20 mm uniform gauge in pure slaked lime ( no sand to be added) over the RCC Roof slabs in the propration of brick jelly to lime being 32:12:5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved patterin keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc, complete as directed by the departmental officers.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. PWD SOR Pg. No. 49 Sl.No.122 a

Supply of U-Pvc Casement Window at site by using with U-Pvc Profile JP 017 (58mm x 60mm 1.00 kg/m) for the outer frame .Total breadth is being divided equally in to two three or four openings (as per drawing).By using U-Pvc Profile JP 015 (78mm x 60mm 1.15 kg/m) for the shutters and the Mullion use U-Pvc Profile JP 019 (72mm x 60mm 1.20kg/m) and completed by fusion welding. All the shutters are fitted with 5mm clear glass with suitable U-Pvc glass bead. The windows are properly fitted with imported quality handles,SS 304 grade steel friction hings & Espengnett. use EPDM Material as gasket. All the profile are Reinforcement with 1.2mm GI Steel. Imported Anchor Fastners are being used to fix in the wall and fill with imported White sealant.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

supply and run of 2 of 4 sq.mm (84/0.3) PVC insulated SC unsheathed cu. Conductor of 1110V Grade in suitable PVC rigid pipe on wall and ceilling (SD-57)

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC concealed Fan Point /Light point

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC plug point

Supply and fixing of 4 Ft 20 Watts LED Box type Tube Fitting with LED Tube complete with ISI Mark including all cost etc complete

supply of fixing 1200 mm (48") AC Ceiling fan complete with stepped electronic t, 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of wall mount CFL Fitting with TW round blocks on wall or ceiling with 16 watts cfl bulb with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications .

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL fitting etc, complete as per standard specifications .

supply and fixing of 2 x 24w energy saver street light fitting with lamp incuding all cost etc complete.

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary, wherever required etc., complete as per standard specification.

Painting with first quality Enamel paint for new iron work etc., complete as per standard specification.