Work of Supply, Installation, Testing and Commissioning of MGBH Panel with allied accessories in MICU at V.N. Desai Mun. Gen. Hospital, Santacruz East.

SITC of medical grade copper pipes/tube including all type of accessories like ,tee elbow ,valve etc complete copper pipe of 15 mm od x 1.0 mm thik SOR - R3-ME-20-MG-1e

SITC of medical grade copper pipes/tube including all type of accessories like ,tee elbow ,valve etc complete copper pipe of 12 mm od x 1.0 mm thik SOR - R3-ME-20-MG-1f

SITC of Double duct Bed Head Horizontal Wall Panel 600 mm. Separate duct for gas outlet and separate duct for electrical. (made up from Aluminium powder coated profiles) with double duct. Separate duct for electrical sockets and separate duct for gas outlet points. Each bed head panel should be pre piped and pre wired. It should have pre wired 4 nos. electrical sockets in separate duct (2 nos. 5 A sockets and 2 nos. 15 A sockets). Gas outlet points 2nos. pre piped to be fitted in the bed head panel. Gas outlet points cost not to be included in the bed head panel cost since it is separate line item. It should have provision for RJ45 connector and Nurse call system bedside switch with partition between LV and ELV system. SOR - R3-ME-20-MG-15g

Call bell system with wiring work

SITC of Vacuum regulator Unit shall fully comply and meets with active medical device of class and in compliance with the EN ISO 10079-3: 2009 standard. It should be duly CE markedcomply with 93/42/EEC Medical Devices: General. It shall be CE marked with the notified body number specified SOR - R3-ME-20-MG-6i

SITC of Oxygen Flow Meter 0-15lpm :It shall fully comply and meets with active medical device of class and in compliance with the EN ISO 15002: 2008 standard. It should be duly CE marked and comply with 93/42/EEC Medical Devices: General. It shall be CE marked with the notified body number specified. The flow meters should be of 0-15 LPM range for oxygen and with inlet pressure 50-60psi.(4.5 bar). SOR - R3-ME-20-MG-6f

SITC of Digital Area Alarm (3 Services: Oxygen, MA4 Air and Vacuum) with pressure sensor: It should fully comply and meet with NFPA-99 and It must be UL Listed with UL certificate must be submitted. Medical Gas LCD Alarm: It should comply with NFPA 99, CSA Z7396.1 and CSA Z305.1. It should be UL or ETL Listed. The LCD alarm shall be microprocessor based with a 10" (25.4 cm) screen and capable of monitoring medical gases. SOR - R3-ME-20-MG-4b

SITC of 3 Gases Valve Box with pressure gauge only for Oxygen, MA4 & Vacuum. It Should fully complies with NFPA-99 standards or CGA standards. It should have zone valve box shall consist of the following components: A steel valve box which can house two to seven shut-off ball valves with tube extensions, an aluminium frame and a pull-out removable window. Pressure Gauges are included. SOR - R3-ME-20-MG-3b