Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.3 LAccepted-AOC 107 133B MILLERPURAM TUTICORIN 628004 TAMIL NADU | TUTICORIN | THOOTHUKUDI | TAMIL NADU | 628004 | L1 | Accepted-AOC Low in cost | |
| 2 | L2₹7.4 L+₹11,525 (1.57%)Rejected-Finance NO 203 F ETTAYAPURAM ROAD TUTICORIN 628002 | TUTICORIN | THOOTHUKUDI | TAMIL NADU | 628002 | L2 | Rejected-Finance High in Cost | |
| 3 | L3₹7.4 L+₹12,000 (1.64%)Rejected-Finance 1 20 E 17 KOILPILLAI NAGAR III RD STREET TUTICORIN 628 006 | TUTICORIN | TUTICORIN | TAMIL NADU | 628006 | L3 | Rejected-Finance High in Cost | |
| 4 | L4₹8.7 L+₹1.3 L (18.3%)Rejected-Finance | L4 | Rejected-Finance High in Cost |
Tender Value
₹8.9 L
EMD Value
₹17,840
Closing Date
30 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE
CE VOC Port Tuticorin
Renovation/conversion of 22KV Control room to Network Operation Center (NOC) at near inside green gate
2023_VOCPT_170420_1
07CE/HMD/2023-24/D2935 Dt11.10.2023
Open Tender
Civil Works
Item Rate
90 days
Tuticorin
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹17,840
4 Dec 2023
11 Oct 2023
31 Oct 2023
11 Oct 2023
30 Oct 2023
11 Oct 2023
Amount
Chipping of concrete and roughening the surface including all labour, tools, equipments etc., complete and as directed by the departmental officers.
Dismantling and removal tiled floors laid in Cement Mortar upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
Dismantling doors, windows and ventilators etc., (wood or steel) shutters including chowkhats, architraves, holdfasts and other attachments etc complete and stacking them within a lead of 100m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
Labour charges for fixing windows and ventilators along with frames in position excluding cost of Window / Ventilator, fittings which will be supplied by the Maintenance Sub Division store at free etc., complete and as directed by the departmental officers.
Dismantling the pressed tiles and weathering course from the roof of building including cost of labour, dismantling tools & equipments and removing the debries from the site and dumping the debries to the nearby low laying area, etc., complete and as directed by the departmental officers.
Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers.
Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing 32mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing 25mm dia. PVC pipe 10 kg. per cm2 working pressure in wall, ceiling and floor with necessary clamps and screws, making holes in the wall wherever necessary by drilling holes in the roofs and walls, packed the holes with necessary brick works or concrete wherever necessary plastering the surface smooth with required scaffolding including cost of pipe and special such as elbows, tee, union joints, reducer etc., cutting threading etc., complete complying with AISS and as directed by the departmental officers.
Providing and laying approved colour and quality of Vitrified floor tiles 60 x 60 cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 20 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers.
Providing and laying approved colour and quality of Ceramic floor tiles 30 x 30 cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 12 mm thick. The rate inclusive of cost of tiles, all materials, labour, white cement, conveyance etc., complete complying with AISS and as directed by the departmental officers.
Providing and fixing in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)), 6 mm thick of wall tiles over the existing wall up to 2.50 m height by chipping the wall surfaces wherever required and fixing with approved colour and quality of tiles including all materials, labour, equipments etc., complete complying with AISS and as directed by the departmental officers.
Finishing the top of weathering course with one course of machine pressed tiles of size 23 cm X 23 cm X 2cm in Cement Mortar 1:3 (M. Sand (Crushed Stone Sand)) including all materials, labour, etc., complete complying with AISS and as directed by the departmental officers.
Providing and fixing of 12.5 mm thick Gypsum Board False ceiling with suspended GI channels for every 2'-0 x 2'-0 c/c fixed with brass screws, etc. The surface joints to be finished with paper tape and putty etc.,. The cost including for all the materials, labour charges ... etc. complete and as directed by the departmental officers.
Providing and fixing of glazed Aluminium Partition with Aluminium frame section (manufactured to relevant IS Specification) for vertical and bottom of size 65 X 38 X 2 mm, horizontal section of size 100 X 45 X 2 mm including providing 5.5 mm thick glasssuperior quality at middle portion and Novapan of 8 mm thick at top and bottom with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., including drilling holes in theconcrete / brick masonry etc., wherever required, all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including using glazing clip, rubber beading for glazing and necessary screws, plugs etc., complete and as directed by the departmental officers.
Supplying and fixing UPVC WINDOWS( Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles aremulti chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter. The shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. The rate including cost of all materials, labour, tools & plants, conveyance, fixing in position etc., complete and as directed by the departmental officers.
Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing of 1000 litres capacity Sintex double layer water tank with approved brand including cost of PVC water tank, making connection with input and output water pipe line and valves. Cost inclusive of all materials, labour charges, & conveyance etc., complete and as directed by the departmental officers.
Supplying and fixing in position of chinnaware Wash Basin (White color) 550 mm x 400mm size with pedestal (parryware/Hindware) of approved quality with necessary fittings such as cast iron bracket, 1 no 15mm C.P heavy duty piller tap with pentagonal head, 32mm dia PVC waste water pipe and 15mm dia nylon connection, 1 No 15 mm dia G.M. wheel valve and fixing it with the wall with necessary plugs, clamps and screws, and giving water supply connection and painting the exposed pipe connection with two coats of paint of approved colour, including all labour, materials etc.,complete complying with AISS and as directed by the departmental officers.
Supplying and fixing of Lipped Mouth Porcelin Flat Urinal (White) of approved quality with all accessories such as 32mm dia bell mouth PVC connection, 15mm dia G.M wheel valve, 15mm ida 'B' class GI waste water pipe, 15mm dia nylon coneection, 15mm dia brass nipple, including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing in position of best Indian make chinnaware water closet of European type (White) of double trap syphonic with fibre cover including all fittings and necessary lead pipe jointing the trap with C.I. pipe, the pipe connection being embedded below floor level in brick jelly concrete in lime mortar 1:2 including cost of fittings of low level flushing cistern with syphonic fitting tank of 12.5 litre capacity with inlet and over flow at bottom and connecting it with water supply pipe line and painting the pipe line with two coats of paint approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing in position of best Indian make heavy duty Gun Metal Wheel Valve at 32mm dia. Of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing in position of best Indian make heavy duty Gun Metal Wheel Valve at 20mm dia. Of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
Supplying and fixing in position 15mm dia. Heavy type Brass Chromium Plated Pillar tap of approved quality including all materials, labour etc., complete complying with AISS and as directed by the departmental officers.
Preparation of sub grade by excavating earth work to 15 cm average depth, dressing to camber and consolidating with power road roller including making the undulation area levelling etc., and disposal of surplus earth to the low lying area to a lead of 1km. etc., complete complying with AISS and as directed by departmental officers.
Providing stacking and spreading gravel 50mm Thick, levelling to gradient and required camber including cost of materials, labour, watering and rolling with power road roller and cost inclusive of road machine, tools, transportation, conveyance, driverbata etc., complete complying with AISS and as directed by departmental officers.
Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.
Dismantling G.I. sheet roofing including ridges, hips, velleys, gutters, etc., and stacking the serviceable materials and dispostal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers.
Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers.
Writing letters or figure on any surface with enamel painting (stops, comas, hyphens and the like not to be measured and paid for seperately) of approved colour and quality for 10 CM height letters including cost of enamel paint, labours, scaffolding charges and cleaning the surface etc., complete complying with AISS and as didrectred by the departmental officers.
Painting TWO coats with Plastic emulsion paint of approved brand and colour over New Wall surfaces including one coat of alkalin resistance primer of approved brand so as to give an even shade. Prior to applying the primer, the wall surfaces shall be thoroughly cleaned of all grease, dirt, loose pieces, scales and make the surface even by applying wall putty and make good of the surface with sand paper etc., The cost including preparing the surface, all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.
vairamuthu
SURYA ENTERPRISES
KSR CONSTRUCTION
stage.html
html • 0.04 MB
techsummary_186711.pdf
PDF • 0.27 MB
finsummary_186711.pdf
PDF • 0.17 MB
LOA.pdf
PDF • 0.52 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .