CA NO CWE SGNR 93 of 2020-21 SPECIAL REPAIRS TO BUILDING NO. P-48 AND P-49 (OTM ACCOMMODATION) AT MILITARY SATIN FAZILKA (2ND CALL)

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls complete all as specified all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

All as per item Srl No 2 above but n exc 1.5 sqm each each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing rubbish off the premises each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

S & F pressed steel door frames with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified size of frame 105X60mm complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Cement concrete 1:3:6 type B-1 for filling of pressed steel fram and hold fast blocks each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

M&L 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

Demolition of reinforced concrete in Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) each (without taking off shutters from the frame) complete all as specified all as specified and directed by Engineer-in-Charge.

M & L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingand polishing complete including 15 mm thick sceeed bed or bedding in CM 1:4 complete all as specified all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any desc. exc 1 sq. m but n exc 2 sq m each complete all as specified all as specified and directed by Engineer-in-Charge.

Refixing in same opening Shutters of any description exc1 sq. m but n exc 2 sq m each complete all as specified all as specified and directed by Engineer-in-Charge.

S&F curtain rod decorative pattern with brackets stops & rollers complete all as specified and directed by Engineer-in-Charge.

Brickwork with flyash bricks, straight or curved on plan to any radius i n half brick thick walls, built in complete all as specified all as specified and directed by Engineer-in-Charge.

Cutting holes not exc. half brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM(1:3) or PCC(1:2:4) Type B-1 as required complete all as specified all as specified and directed by Engineer-in-Charge.

S & F Flush shutters,35mm thick,solid core construction,with block board core and plywood face panels,commercial type on both sides as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkatsall acomplete all as specified all as specified and directed by Engineer-in-Charge.

Supply only Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified all as specified and directed by Engineer-in-Charge.

S & F Aluminiumanodised barrel tower bolt of extruded section 300mm long all as specified and complete all as specified all as specified and directed by Engineer-in-Charge.

S&FAluminium alloy, anodised,sliding door bolt 300mm long with hasp,staple (bolt type) and fixingclips of sheet, cast or extrudedsections and fixing bolts andsliding bolts of extrudedsections or cast-aluminiumalloy and fixed complete all as specified all as specified and directed by Engineer-in-Charge.

S&F powder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc complete all as specified all as specified and directed by Engineer-in-Charge.

S&F powder coated aluminum windows and ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos) hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified all as specified and directed by Engineer-in-Charge.

S & F double action hydraulic floor springs of approved brand and manufacturer (Conforming to IS) for aluminium doors including cutting and making good the floor as required all as specified and directed by Engineer-in-Charge.

S&F bright finished brass 100 mm mortice slatch and lock with four levers and pair of anodized (anodic coating 10 micron) as per IS-1868) aluminium lever handles with necessary screws etc complete as per directed by . (Approved quality) complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; Cooler Stand, railings; framework of water tanks & similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutters 35 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification complete all as specified all as specified and directed by Engineer-in-Charge.

S&F 150 mm extruded aluminium alloy handles ,fabricated type complete all as specified all as specified and directed by Engineer-in-Charge.

S & F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified all as specified and directed by Engineer-in-Charge.

S & F100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinges pin,anodised and fixed complete all as specified all as specified and directed by Engineer-in-Charge.

S&F in repairs, steel window 1.25mm thick box type (primer coated) ERW hollow "P" section of size 60mm x 25mm single rebated comprises Glazed skeleton shutter ERW Section 50mm x 20mm and 1mm thick with two open able leaf consisting two Nos. of sash bars of flat iron 12mm x 3mm complete welded to frame with one vertical mullion of ERW box type "T" section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1, four Nos. for each window including following fittings welded to the frame shutter complete all as specified all as specified and directed by Engineer-in-Charge. (a) Hold fast 150mm long of 12mm x 3mm made to shape - 04 Nos. per window. (b) Handle of "Z" section 20mm x 25mm, 100mm long - 01 No. per leaf. (c) MS tower bolt 150mm long - 02 Nos. per leaf. (d) MS pintol hinges of size 100mm x 14mm - 02 Nos per leaf. (e) "Z" section 20mm x 25mm x 100mm long stopper - Per leaf. Note : Wire mesh and painting shall be measured and paid separately under appropriate items of BOQ.

S&F in repairs, steel ventilators fixed type 1.25mm thick Box Type (Primer Coat) ERW hollow "P" section of size 60mm x 25mm single rebated optional full glass or wire mesh complete complete all as specified all as specified and directed by Engineer-in-Charge..

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick, frame work of size 605x605 mm for false ceiling and providing and fixing for 4mm thick E board fibre cement designer ceiling board of Everest make embossed texture of size 595 x595mm fixed with screws to snap grid works in ceiling complete all as specified all as specified and directed by Engineer-in-Charge.

M&L for 400x400x7mm non-skid coloured ceramic tile in floor set & jointed in cement slurry over 15mm thick cement screed 1:4 over & complete all as specified and directed by Engineer-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in cement to matchwhite or coloured coloured cement slurry laid over 15mm thick cement screed 1:4 over completeall as specified and directed by Engineer-in-Charge.

M&L glazed ceramic coloured tiles, (300x450)x7-8mm thick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified all as specified and directed by Engineer-in-Charge.

M & L, viritfied ceramic tiles 10mm thick light shade (square or rectangular) area of each tile not .exceeding 0.36 sqm as in floors over 15mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 10mm thick cement sand screed in CM 1:3 complete all as specified all as specified and directed by Engineer-in-Charge.

Providing and injecting chemical emulsion treatment should be provided within the plinth area of the ground floor of the structural wherever such cracks are noticed by drilling vertically 12 mm hole at the junctions of floor and walls, constructional and expansion joints mentioned these holes using a hand operated pressure pump unit refusal or to a maximum of one ltr per hole. The holes shall be sealed .in general the idea is to change the soil below the floor at the location of crack with toxicants. So that termites in the soil are denied access though such cracks and openings in the floor. Infested woodwork in CHAUKATS, shelves, joints, purlines, etc in contact with the floor or the wall shall be provided with protective treatment by drilling holes of about 3 mm diameter with a downward slant to the core of the woodwork on the inconspicuous surface of the frame . these holes should be at least 150 mm centre to centre and should cover the entire framework. One of the chemicals given in 4.1 shall be liberally infused in these holes. If the wood is not protected by paint or varnish two coats of the chemicals given im 4.1 shall be given on all the surfaces and services adjoining the masonary and complete all as specified in IS 6313( Part 3) : 2001 and directed by GE& Manufacturecomplete all as specified all as specified and directed by Engineer-in-Charge.

M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper and hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun complete all as specified all as specified and directed by Engineer-in-Charge.

M & L Preparation of Old plastered surfaces by removing old treatment and applying one coat of interior grade wall putty and making it smooth with sand paper and hand electric grinder then applying two coats of oil bound distemper including all as specified by mechanical method i.e. spray gun complete all as specified all as specified and directed by Engineer-in-Charge.

Preparation of roof top surfaces, providing and applying UV stable single components smart care damp proof ultra is a fiber reinforcement elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibers and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio of damp proof and water 3:1 and coverage @ 1 ltr/10sqm with a thickness of 650 micron. Note :- 6 Hrs interval between two coats will be maintain & the work will be carried out through company applicator duly got approved from accepting officer in writing before incorporation and paid only after receiving of the warranty certificate from the company complete all as specified all as specified and directed by Engineer-in-Charge.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified all as specified and directed by Engineer-in-Charge.

Providing, cement concrete type BO 1:2:4 (12.5mm agg) in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:6) complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra lime or cement) in two layer , one layer 10mm and outer 5mm with water proofing compound complete all as specified all as specified and directed by Engineer-in-Charge.

Shotcreting 25mm thick in RCC coloumn, beams and slabs etc in layers with approved design mix concrete having the specified charateristic compressive strength (with ordinary portland cement coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criterial) in the cost of centering and shuttering at edges and corners etc as per direction of . incl chipping of unsound/weak concrete material 50mm average thickness from slabs, beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surfaces and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc incl removal of rust by applying approved rust removal chemical & coating with Dr fixit epoxy zinc primer @ 6 sqm/ltr at DFT of 100 microns as per specification disposal of debries for all lead and lifts all complete as per direction of Engineer -in-Charge.

M&L Rendering 10mm thick on concrete surfaces in CM (1:3) in ceiling complete all as specified all as specified and directed by Engineer-in-Charge.

Providing and fixing hard drawn steel wire fabric not exc 4KG/Sqm of wire mesh to be fixed and firmly anchored to the concrete surfaces by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tools and plants complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane all as specified and directed by Engineer-in-Charge.

M&L Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified all as specified and directed by Engineer-in-Charge.

Applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified all as specified and directed by Engineer-in-Charge.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified all as specified and directed by Engineer-in-Charge.

Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified all as specified and directed by Engineer-in-Charge.

Applying two coats of cement base paint, white or tinted on old wall surface including scrappiing down old treatment and preparation of surface complete all as specified all as specified and directed by Engineer-in-Charge.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified all as specified and directed by Engineer-in-Charge.

M & L 15 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 complete all as specified all as specified and directed by Engineer-in-Charge.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

M & L 60mm thick rubber moulded with coloured pigmentglossy finish interlocking factory made paver blocks of any size and shape conforming to IS 15658-2006, M-35 set, jointed and pointed in dry sand over 25 mm thick sand cushion complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Chequered cement concrete tiles gloss finish 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement & pigment complete all as specified all as specified and directed by Engineer-in-Charge.

Precast cement concrete set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound (ISI marked) complete all as specified all as specified and directed by Engineer-in-Charge.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refining or removal to store complete all as specified all as specified and directed by Engineer-in-Charge.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified all as specified and directed by Engineer-in-Charge.

S&F chlorinated PVC (CPVC) pipes 15mm NB fixed complete to walls,ceiling or in floors etc including jointing of pipes & fittings with CPVC solvent cement complete all as specifiedand directed by Engineer-in-Charge.

All as per ser item No 67 here in before but for fixing only complete all as specified all as specified and directed by Engineer-in-Charge.

S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floorall complete all as specified all as specified and directed by Engineer-in-Charge.

All as per ser item No 70 here in before but for fixing only complete all as specified all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) bends any radius 110mm diacomplete all as specified all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipecomplete all as specified all as specified and directed by Engineer-in-Charge.

S&F in repair Stop cock 15mm bore dia, fancy type, cast copper alloy screwed down ,high pressure,with crutch or butterfly handle, screwed down, screwed both ends to iron pipe of size 15mm .Make Luster/BIR/Leader( Duly engrave ISI mared and conforming to relevant IS) complete all as specified all as specified and directed by Engineer-in-Charge.

S&F angle valves chrome plated fancy type 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC connection in repair both sides brass unions internal for size of 15mm size with PTMT nuts of length 450mm long complete all as specified all as specified and directed by Engineer-in-Charge.

Supply and fix in repair PVC low level flushing cistern 10 litre capacity, valveless syphonic action type with float, handle including flush pipe of polythene of low or high density of PVC 32mm dia, 60cm long and bracket etc and making connection including making good disturbed portion complete all as specified all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Vitreous China wash down water closet pan (Pedestal pattern) white excluding fixing bolt incl plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and jet spray complete fixed in repair complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Vitreous china wash basin white flat back size 550 x 400mm size,with pedestal incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified all as specified and directed by Engineer-in-Charge.

M & L for 50mm thick cement concrete type C2 1:3:6 (20mm graded aggregate) as in plinth protection complete all as specified all as specified and directed by Engineer-in-Charge.

S&F in repairs Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F in repair PTMT float valves 20mm bore, high pressure, with polythene float &flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F rotional molded polythylene water storage tank 02 layer white colour 500 ltr capacity (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if reconnecting and re-fixing in position complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface all as spd and directed by Engr-in-Charge. Note: Rate for making good shall be deemed to be included in above item rate complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable main switches and MCB distribution boards single phase complete all as spd all as specified and directed by Engineer-in-Charge..

M&L Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid concealed conduit medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction boxes 2mm thick galvanized steel pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 2.8mm thick plastic laminate (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly complete all as specified all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 87 here-in-before but one three pin Piano type socket outlet 5 Amps on the independent board complete all as specified all as specified and directed by Engineer-in-Charge.

All as per Srl item No. 87 here-in-before but one three pin piano type socket outlet 5 Amps on the board complete all as specified all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with 2.5 Sqmm (Nominal area) PVC insulated multistranded fire retardant low smoke unsheated and stranded copper conductor cable ISI marked in and including PVC concealed conduit medium quality and conduit fitting for 3 pin 15 amp multicore switch socket combination including PVC insulated 2.5 Sqmm single core copper earth wire to common earth and connected to earth dolly and including suitable MS sunken box of suitable size and covered with & including 3 mm thick bakelite, laminated hylem sheet top cover etccomplete all as specified all as specified and directed by Engineer-in-Charge.

S&F switch piano type single pole one way 6 Amp,230 VAC supplyall complete all as specified all as specified and directed by Engineer-in-Charge.

S&F piano type socket two in one ,3 Pin 5 Amps 230 VAC supply complete all as specified all as specified and directed by Engineer-in-Charge.

S&F switch piano type single pole one way 15 Amp on laminated sheet top cover complete to all as spd (Sheet top cover incl in point wiring) complete all as specified all as specified and directed by Engineer-in-Charge.

S&F piano type socket Pinao type 6 Pin 16 amp,230 VAC complete all as specified all as specified and directed by Engineer-in-Charge.

Supply & fixing PVC Lamp holder suitable for and including batten fittings provided with LED Electric Bulb of 9 W with backalite 20mm back plate complete all as specified all as specified and directed by Engineer-in-Charge.

M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F of fan regulator step down electronic type heavy duly flush type 230 volts AC single phase fixed on laminated sheet top cover (laminated top cover is included in point wiring) and connecting up complete all as specified and directed. (Laminated sheet top cover and sunken box is included in point wiring) complete all as specified all as specified and directed by Engineer-in-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified all as specified and directed by Engineer-in-Charge..

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified all as specified and directed by Engineer-in-Charge.

Excavation in trenches , n exc 1.5 m wide and n, exc 1.5 m in depth for foundation, etc. or for shafts, wells cesspits, manholes, peir holes. Etc 1.5 m n exc 10 sqm on plan and n exc, 1.5 m in depth and getting out complete all as specified all as specified and directed by Engineer-in-Charge.

Returning, filling including spreading, leveling, watering and well ramming in layers not exc 25cm in soft/soil complete all as specified all as specified and directed by Engineer-in-Charge.

Removing excavated soil not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified all as specified and directed by Engineer-in-Charge.

M&L Sand cushioning for UG cable protection/ducts, consolidated sand compacted with clean dry sand complete all as specified all as specified and directed by Engineer-in-Charge.

M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor all as specified and directed by Engineer-in-Charge..

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified all as specified and directed by Engineer-in-Charge.

Supply and fix GI pipe 40 mm bore light grade for protection of cable including provision of clamps, nuts, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directred by Engineer-in-Charge.

S & F of MCB suitable for 240 volts AC supply, SPNwith over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 40 Amps complete all as specified all as specified and directed by Engineer-in-Charge.

S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting TPN 4 way 415 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB's and isolators complete all as specified all as specified and directed by Engineer-in-Charge.

S & F of MCB suitable for 415 volts AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 63 Amps complete all as specified all as specified and directed by Engineer-in-Charge.

M&L sub main wiring of PVC FRLS insulated unsheathed two core 6 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6.0 sqmm as earth wire drawing in concealed PVC conduit complete all as specified complete all as specified all as specified and directed by Engineer-in-Charge.

M&L sub main wiring of PVC FRLS insulated unsheathed two core 4 sqmm copper multi stranded conductor including one run of single core copper conductor of size 4.0 sqmm as earth wire drawing in concealed PVC conduit complete all as specified all as specified and directed by Engineer-in-Charge.

Supply and Fixing MCCB 4 pole 100 A , 415 V, 50Hz having breaking capacity 25KA with all fitting accessories complete complete all as specified all as specified and directed by Engineer-in-Charge.

M & L for LED 10W bulkhead fitting with IP-65 engineering plastic housing with clear, single phase 240C, including 1.0 sqmm copper flexible cable twiested three core alongwith flexible PVC conduilt from ceiling rose to fitting testing complete Cat part No. BLRB 18W CW of complete all as specified all as specified and directed by Engineer-in-Charge. Note : Warranty and test certificate of LED light fittings to be produced before incoporating.

S&F of Ceiling fan of 1200mm sweep mounted in suitable arrangement for operation on 230 volts, single phase, 50 cycle per second, AC supply with electonic type regulator and connecting accessories BEE 5 Star rating and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable from ceiling rose to fan fixing in ceiling complete and making the surface good after fixing the fan complete all as specified and directed by Engineer-in-Charge.

S&F of Heavy Duty exhaust fan of 400-450mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified all as specified and directed by Engineer-in-Charge.

S&F of Heavy Duty exhaust fan of 300 mm sweep mounted in suitable opening arrangement with louvers suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheated copper conductor flexible cable 24/0.2mm drawn in flexible PVC conduit fixing in wall and making suitable hole for air freshner fan with necessary finishing of the surface good after fixing the fan complete all as specified all as specified and directed by Engineer-in-Charge.

S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin complete all as specified complete all as specified all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth platge electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal round level) with edge of the plae not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and GI washers earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around bottom and top of earth plate as shown in electrical piate No. 3 of SSR Part-I and connecting to earthing test point and testing on completion including PCC 1:3:6 type C2 for earthing pit, GI light grade protection pipe of size 15mm dia, watering pipe 20mm bore medium grade, CI cover and frame necessary earth works and PCC work etc complete all as specified. Earth plate shall be surrounded by alternate layer of charcoal of coke and common salt 15cm thick alround the earth plate including bottom and topcomplete all as specified all as specified and directed by Engineer-in-Charge. (Note: PCC chamber shall be constructed at least 1.5mtr away from the earth electrod and pipe for watering shall be slanting manner) ---------------------------------------------------------------------------------------------- Note : A sum of Rs. 68,207.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 32 & 33 (Schedule of Credit) of Tender document

KATARIA CONSTRUCTION

ROYAL BUILDERS