CONSTRUCTION OF BUILDING LESS SCHOOL AT MS WANGIPORA KANTHPORA.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing and laying stone soling by way of Nallah boulders size on level ( Hand packed ) Watering ,ramming complete below foundation & rooms including carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

CAST-IN-SITU Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carraiges upto Site of Work.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carraiges upto site of work.

Centering and shuttering including strutting, propping etc and removal of form work Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc and removal of form work Walls any thickness including attached buttresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc and removal of form work Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc and removal of form work Columns

P/L and placing high strength deformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Brick work with F.P.S bricks of class designation 75 in foundation & Plinth in cement mortar in 1:6 (1 cement: 6 coarse sand) incl. carriages of bricks upto site of work complete including extra upto floor V-level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked : including hinges all complete as per directions of EIC

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported wood

15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar)

6 mm cement plaster to ceiling of mix 1 : 3(1 cement : 3 fine sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and applying white cement based wall putty of avg.2mm of approved brand and manifacture

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Icnl all carriage

Providing colour coated Hi-rib profile sheet roofing of approved brand & manufacture, fixed with polymer coated steel screws bolts 100 mm long 8 mm dia with washers & plc. cap (upon a pitch of 60 degrees) excluding the cost of purloins, rafters and trusses (0.50mm thick)

Providing ridges/ hips /valleys 600mm overall width with GS plain colour sheets with necessary fittings

Providing and fixing of bright finished brass hardware fittings

100 mm Handle

150 mm Handle

100x10mm Tower bolt

200x10mm Tower bolts

Concield locks

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube

Supply and fixing the following sizes of RIGID PVC conduits 1.8 mm thick (ISI Marked) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on surface including cutting chases in the walls/floors and making good the same complete as required

25 mm dia RIGID PVC conduits

Fan Boxes

ceilig Lighting boxes/cases

Sanitary Part: providing and placing on terrace polythene water storage tanks ISI 12701 marked indicating the BIS license no with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall: PN-16 pipe , 40mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall: PN-16 pipe , 25mm OD(SDR-7.4)

PPR Union 40mm

providing and fixing water closet indian type WC with 5 litre flushing cistern of approved quality with integral type foot rests 2 no

providing and fixing soil waste, vent pipes 100mm including tees bends all complete job

providing and fixing soil waste, vent pipes 75mm including bends all complete job

Construction of masonary chamber 30 x 30 x 50 cm inside with 75 class designation bricks in cement mortar 1:4 with manhole cover all complete

providing and fixing Cp brass bib cocks 15 mm of approved make and desire all complee

providing and fixing Cp brass angle value 15 mm of approved make and desire all complete

Providing and fixing of Gate value of approved quality 40mm

Providing and fixing of soap case of approved quality

providing and fixing of 100 mm steel gratings in nahani or gully trap

Providing and fixing CP nipples of approved quality

Provinding and laying cement concrete rings 3' wide in sockage pit including excavation and a cover lid including carriage and head load all complete job.9 inch Thickness all complete job.