SPL REPAIR TO BLDG NO P 47 P 85 AND P 86 AT JALIPA MIL STATION UNDER GE ARMY BARMER

Amount

M&L for taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed.

M&L for 2.0mm thick wall care putty on wall complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

M&L for complete removal of existing treatment, plastered or unplastered old surfaces of walls, including filling of cracks/holes by crack filler, removing unnecessary nails applying two coats of oil bound distemper/ emulsion over a coat of interior wall primer over 2mm thick wall care putty complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment, plastered or unplastered old surfaces of ceiling, including filling of cracks by crack filler, removing unnecessary nails and applying three coats of white wash complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) with using WPC on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for preparing old/New plastered or unplastered surfaces of walls, removing unnecessary nails including filling of cracks/holes by crack filler and applying two coat of acrylic exterior paint over a coat of primer of required shade Asian ACE or techno commercially equivalent at the rate 1.65 Litre/ 10 Sqm by application of roller brush complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for applying neat cement slurry with 3 kg of cement per sqm with mixing of liquid water proofing compound as per manufacturer instructions over surfaces roof, terrace, projection, chajjas, walls after prepration and cleaning of surfaces complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM (1:3) on concrete surfaces of roof, terrace, projection, chajjas, walls (old or new), finished even and smooth (without using extra lime or cement) with mixing of WPC as per manufacturer instructions complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases,landing, chajjas and similar suspended work complete all as specified and directed.

M&L for applying evenly a priming coat with bituminous primer at 4 Kg per 10 sq metre over plastered/concrete surfaces including prepration complete all as specified and directed.

M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) by torched application method laid over and including applying evenly a tack coat of industrial bitumen S-35 grade (30/40) at the rate of 1.2 kg per Sq.m including cleaning surfaces by on and as per manufacturer instructions complete and all as specified and directed.

M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) over roof, terrace in concrete including using integral WPC as per manufacturer's instructions, well compacted and fair finish, with forming by cutting 10mm wide and 10mm deep "V" grooves, cleaning out and filling solidly with a hot mixture, mastic bitumen, size of panel with groove shall not exceeding 0.40 sqm complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450 x 350 x 7mm thick, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) in walls and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Chipping of 50mm average thickness unsound/weak concrete material from slabs, beams, columns, footings etc. and plaster with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and debris to a lead of 100m and lift not more than 1.5m from the starting point etc all complete all as specified and directed.

M&L for Cleaning & applying rust remover on (CICO Clean-o rust) in two coats over rusted reinforcement surface of RCC members and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/ltr not less than 50 microns dft with CICO ZINCILATE-500 or techno commercially equivalent to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris complete all as specified and directed. Make: CICO clean-O-rust, CICO ZINCILATE-500 or techno commercially equivalent in Fosroc/Dr Fixit/ACC/L&T/STP. (Note : Entire Exposed Surface of RCC members after chipping shall be measured and paid.)

M&L for applying to the damaged concrete portion of slab /columns/beams/chajjas /parapet/roof projection/balcony/staircase with single component, fiber reinforced , dual shrinkage - compensated thixotropic, cementitious patch repair mortar CICO Repocem PM( having the technical parameters mentioned in material specifications) capable of applying upto 20-25mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thickness and techno commercially equivalent of Fosroc Renderoc/STP/BAS complete all as specified and directed.

S&F of new steel or rebars by drilling holes with 10 mm to 25mm dia and 100 to 200mm deep/wide as per IS code of 10D formula and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching complete all as specified and directed. (Note : Steel/reinforcement shall be paid and measured separately) . Make: CICO RESIFIX-G or techno commercially equivalent in Fosroc lokfix and Master builder (BASF)

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 4.0 mm thk sheet glass ordinary quality and glazing with beads fixed with metal panel pins n.exc 0.5 sq. m. in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stailess steel wire staples complete all as specified and directed.

M&L for dismantling of water tanks of capacity Exc 250 and n exc 500 ltrs (RCC hume Pipe/PVC) including disconnecting all connections etc complete all as specified and directed.

S&F for new rotational moulded polythylene water storage tank of 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

M&L for taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

M&L for taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for 15mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repairs 15mm bore stop valves, angle cock, cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and directed.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including trap and provn of cement concrete bedding complete as fixed complete all as specified and directed.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and 32mm PVC waste pipe etc complete all as specified and directed.

S&F in repair of PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L in repair of PVC (SWR) 110 mm bore bends complete all as specified and directed.

M&L in repair of PVC (SWR) 110 mm bore branch piece (single Y) equal or unequal complete all as specified and directed.

M&L for special treatment to floor/slab/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom, sides & top upto dado level), removal of floor trap and soil pipes including removal of demolished material exc 500m and n exc 1000m, fix the soil pipe, 20mm dia 200mm projected GI spout pipe through wall fill the gap between pipe and left out opening with PCC Type B0, 1:2:4 with using WPC cleaning to remove loose particles, dust, latance with brush etc of entire surface properly, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the bottom/slab and sides/beams/walls upto dado level of sunken area, prepration of surface and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm, after drying of surface fill the sunken area with water for 24 hrs for the testing of leakage/seepage if leakage/seepage not observed, filling the sunken floor/area with PCC (1:5:10) using brick bat mixed with WPC liquid Conplast 421 as per manufacurer's instructions,, including placing of 75mm new CI floor trap, rendering again 40mm thick in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, over PCC/ top area, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the 40mm thick rendering, and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm over 10mm thick rendering/top surface, area of bathroom floor exc 1.20Sqm but not exc 2.00Sqm complete all as specified and directed. Note : Nitoproof 100/120 and WPC Conplast - 421 will be used of Fosroc or techno commercially equivalent make.

M&L for 75 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 2.5mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

M&L for light shade of vitrified ceramic tiles of size 10mm thick (coloured) (Square/rectangular) area of each tile exc 0.36 but n exc 0.42 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for 20mm thick Granite (of any type in single piece) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L for demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, fixed on slab complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying two coats of distemper oil emulsion over a coat of interior primer over 3mm thick wall care putty complete all as specified and directed.

M&L for dismantling of boarding any description fixed in any position with nails complete all as specified and directed.

S&F for 18mm thick MDF prelaminated board, prelaminated one side with decorative choice lamination matt finish & other side balancing white lamination fixed with screws as in cupboard shutters with self closing hinges 02 Nos in each shutter and fancy SS handles 01 No 100mm size in each shutter and drawer of bed room, kitchen and internal shelves, kitchen cabinets, partitions and drawers of any size complete all as specified and directed.

M&L for taking down shutters of any description exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

M&L for taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified and directed.

M&L for anodised aluminium partition (partly glazed and partly panneled) comprising of aluminium section 101.04 x 44.45 x 1.5mm thick, aluminium top rail 86.17 x 44.45 x 2.3mm, bottom and lock rail 150 X 44.45 X 2.3mm and style 53.7 X 44.45 X 2.3mm and including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip, and aluminium hardware fitting fixed with steel chromium plated screws including taking down old aluminium partition complete all as specified and directed. Note : Glass and PVC panel will be measured and paid seperately.

S&F 4.8 mm thk sheet glass ordinary quality and glazing with beads fixed with metal panel pins exc 0.5 sq. m. in each pane complete all as specified and directed.

S&F 40 mm thick solid PVC sandwich panel with 1mm printed PVC sheet on both sides suitably fixed in frame work as per specification & drawing complete all as specified and directed.

M&L for demolition of cement concrete in ground floors and pavings not excedding 15cm thickness below or above ground level complete all as specified and directed.

M&L for taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.

M&L for taking down unserviceable main switch/DB, Teak wood boards etc complete all as specified and directed.

M&L for taking down submain wiring of any size complete all as specified and directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories including necessary modular metal flush box/pressed steel terminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches, sockets, fan regulators etc. including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /fan/CB point controlled by one switch, complete all as specified and directed.

All as per srl item No 76 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.

All as per srl item No 76 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per srl item No 76 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.

All as per srl item No 76 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed

Supply and fix socket outlet 2in1, 3pin, 5A complete all as specified and directed.

Supply and fix socket outlet 2in1, 3pin, 6/16 A complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

Supply and fix bell push, flush type, 5 Amps complete all as specified and directed.

Supply and fix call bell AC, 230 volts single pole complete all as specified and directed.

Supply and fix step type electronic fan regulator flush type, 230 volt, AC complete all as specified and directed.

S&F Supply and fixing single pole 06 to 32 A rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing andcommissioning complete all as specified and directed

S&F MCB single pole and neutral 40 Amps, 240 Volts, 'C' curve complete all as specified and directed.

S&F MCB TPN 40 to 63 Amps, 415 Volts 'C' curve complete all as specified and directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

Supply and fixing load line distribution board TPN vertical, 4 way double door type with IP 54 protection, isolated neutral bar, cement spill protector door earthing fixed on wall semi flush with incoming control through MCCB 4 poles 125 Amps, 16 KA, blanking plates complete with all accessories all as specified and directed. (Make : Indoasian Cat Part No: 812040 or equivalent make of ABB, Schneider, Havells, C&S etc) Note: Outgoing MCBs shall be measured and paid separately

Supplying and fixing in repair of ceiling fan, five star rating, (BLDC) white/ivory 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50hz supply with down road complete, including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector etc complete all as specified and directed

Supply and fix in repair exhaust fan 250 mm sweep with louvre plastic body complete fixed to window/wall with suitable fastening and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm complete all as specified and directed.

Cutting of brick/stone masonary for fixing of exhaust fan and making good to the disturbed surface including painting/colour wash complete all as specified and directed.

M&L sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run o f 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S&F in repair LED batten suitble for indoor application 20 W, 4' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair LED batten suitble for indoor application 10 W, 2' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repair lamp holder (Angular) PVC/poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply & fix in repair LED lamp 10 W, min lumen output 950 lumens at 6500 K CCT for batten holders complete all as specified and directed.

M&L in repair earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth lead wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified and directed.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A, 240 V complete all as specified and directed.

S&F SPN 63 A rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing andcommissioning, complete all as specified and directed

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 12 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.

Supplying and fixing in repair recess mounted low glare LED panellight 2'X2' size 36 watt white/warm white for armstrong/grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed. Make: BAJAJ/Wipro/Crompton/Havells

Supply and fix in repair energy efficient LED street light fitting of 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed. Model: RAPTOR NEO Cat No : TRP-409-60-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix

S.K. INFRASTRUCTURE (BID ID -3143747)

RAMDEV ENTERPRISES (BID ID -3144458)

M/S Tanisha Traders (BID ID -3144429)

m/s sai construction company,bijarar (BID ID -3143340)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3143339)

Lalit and Brothers (BID ID -3143538)

m/s jogaram sujaram (BID ID -3143959)