Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹48.0 L+₹3.6 L (8.13%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹66.2 L+₹21.8 L (49.2%)Rejected-Finance 1 204 LOWER GROUND FLOOR SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L3 | Rejected-Finance Being other than lowest |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
2 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR/ MAINT TO OFFRS MD ACCN/MESSES/MES IBs/COMMAND HUTS/CENTRAL AMENITIES AT MALL ROAD, PARADE ROAD, POLO ROAD, URBAN VILLAGE AND OTHER MINOR UNITS IN THE AREA OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10
2022_MES_560859_1
GE/DE-67/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,800
Yes
30 Jan 2023
1 Nov 2022
5 Dec 2022
1 Nov 2022
2 Dec 2022
15 Nov 2022
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4.00 sqm each and removing complete all as specified and as directed.
Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and as directed.
S & F for 1st class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed
S & F for Factory made 35mm thick 1st class hard wood for plain framed panelled shutters (any number of panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS: 1003(Part 1), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
M&L Preparation of new wooden surface and applying polish for a glossy finish over 10cm width or girth, complete all as specified and as directed.
S & F 150mm size brass butt hinges complete all as specified.
S & F 150 mm long brass barrel tower bolt, fixed complete all as specified and directed.
S&F 300 mm long brass coated sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 dia with and including minimum of 6 bolts and nuts four or bolt plate and two on staple plate complete all as specified.
S & F 150 mm long brass handle oval type, complete all as specified and as directed.
M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, 01 nos 50 mm size and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats ( Butt hinges and hold fast shall be measured and paid seperatly) all as spd.
S & F for flush shutters 40 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.
S & F for flush shutters 40 mm thick solid core constructions with block boardcore , one face is covered with decorative face veneer with lipping and other face is plain complete all as specified and as directed.
S & F 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. devided into squres with sash bars, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.
S&F Factory made solid panel PVC Moulded door shutter 28-30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm thick Plain coloured PVC back face including supplying and fixing in the frame at site, complete all as specified and as directed.
S & F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding complete all as specified and directed.
S & F 100mm size stainless steel butt hinges fixed to any type of frame with reqd nos of screws complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.
S & F 150mm size aluminum adodised handles complete all as specified and as directed.
S & F 300mm long Mild steel sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections complete.
S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 2 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F floor mounted aluminum body door closer hydraclically regulated designation No. 3 universal type suitable for revolving type door of 851 to 1000mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S&F Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
S&F Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
S&F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.
S&F aluminium alloy powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement (Godrej), rubber gasket and door stopper complete.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frousted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equivalent.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equivalent
M & L for Sliding/openable glass door 12mm thick (toughened glass) of approved quality including necessary all stainless steel powder coated hardware fittings (As like sliding rail, guide, clips, frame , brackets , clits , jammers, stopers, locking arrangement etc) door fixed with floor spring, with two No's stainless steel handle on each leaf/door n exc 30 cm long 25 mm thick complete drilled for fixing with all fitting and fixture complete all as specified and as directed.
M & L for 12mm thick (toughened glass) of approved quality fixed in any position (partition, bathroom enclosure and the like)including necessary all stainless steel hardware fittings (As like frame, brackets, clips, jammers, stoppers. etc.) complete drilled for fixing with all fitting and fixture, complete all as specified and as directed.
S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate or welded to frame complete all as specified and as directed.
M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6mmean radius including demolition of existing brick/block masonry built in cement mortar complete all as directed.
Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.
M&L Rendering 10mm thick in CM 1:3 on fair faces of concrete surfaces as in ceilings, finished even and smooth without using extra cement, complete all as specified and directed.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1-2mm thick wall care putty over new surfaces complete all as specified and as directed.
M & L Preparation of newly plastered /unplastered surfaces of walls and ceilings over 1-2mm thick Birla White/J K White wall care putty, again sand papering thus making surface good and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of primer ,complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying two coats of Oil bound distemper including 1-2mm thick wall care putty JK or Birla complete all as specified and directed.
M & L for preparation of Old plaster external wall and ceiling surfaces by completely removal of existing painting surfaces, filling the cracks, holes with POP/Putty and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied 1-2mm thick wall care putty in two layers complete all as specified and as directed.
M & L for Preparation of New/Old plastered or unplastered surfaces of walls and applying Texture Painting on Wall/Ceiling of various pattern/design over a coat of wall primer and 1-2mm thick wall care putty JK or Birla complete all as specified and as directed.
S & F for Preparation of New/Old plastered or unplastered surfaces of walls and applying wall paper on Wall/Ceiling of various pattern/design over a coat of wall primer and 1-2mm thick wall care putty JK or Birla complete all as specified and as directed.
M & L for Preparation of path/Hardstanding/VIP walking ways surfaces by brooming down/scraping down with steel wire brushes and applying Two coats of high quality floor paint complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for coloured vetrified tiles of size 600 x 600 x 8-10mm thick as in floor over and including 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for Vitrified coloured ceramic tiles light shade 10mm thick, square/rectangular (with pattern and boarder work as required at site), area of tiles exceeding 0.42Sqm and not exceeding 1.50Sqm each tiles as in flooring over and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match over or filling spacers as per requirement at site including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Marc/Kohler)
S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S& F Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete all as specified and as directed.
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S & F in repairs Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/Marc/Kohler)
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
M & L 20 mm thick granite (Z black colour) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding including demolition of existing granite complete all as specified and as directed .
S & F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position complete all as specified and directed.
S & F in repairs 110mm bore PVC (SWR) bends any radius complete
S & F in repairs brass Chromium Plated bottle traps 32mm bore for wash basin with inlet & outlet, screwed for pipe or connetions including necessary packing, union & cap all as specified and directed.
S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63
S & F Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make Jaquar/Cera/Hindware
Wall mounted multiple function Shower Panel including all acessories and fittings, fixed in repairs, complete all as specified and as directed. Make : Hindware Cat Part No. 511686 (size 1650mm x 150mm x 550mm)/Jaquar Cat Part No. JPL-SSF-ST88148B(size 1600mm x 200mm) or JPL-WHT-TMCURVENEO (size1500mm x 230mm) or eqivanlent in Cera/Somany
S & F Full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting taking down existing wash hand basin of any type and size, fixed in repairs, complete all as specified and as directed.
S & F in repairs PVC Door Seal of 0.90mtr long and 40mm wide complete all as specified and as directed.
S & F in repairs mirror mounted PVC cabinet mirror of size 450x600mm all as specified and directed (MAKE : PRAYAG or equivalent).
S & F in repairs Stainless steel Plate rack of size 750x900mm and thickness 20 mm gauge all as specified and directed.
S & F in repairs Stainless Steel fancy type Curtain Rod 20mm dia complete all as specified and as directed.
S & F in repairs Stainless Steel fancy type bracket with designer pattern fancy type knob screws for curtain rod complete all as specified and directed.
S&F in repairs bib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all as specified and directed.
S&F in repairs Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.
S & F in repairs PVC low level flushing cistern white 10 litrs capacity and connections to pipes all as specified and directed.
S&F in repairs Polyethalene syphon kit assembly (any type as reqd) for PVC low level flushing cistern all as specified and directed.
S & F in repair vitreous china pedastal pattern water closet including flush pipe & seat cover 'P' or 'S' trap complete all as specified and directed.
S & F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor as directed .
S & F in repairs Sinks made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm all as specified and directed.
S & F in repairs Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
S&F Sinks (Double bowl) made of stainsless steel 1mm thick as in kitchen with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including cantilever brackets and connecting union to pipe overall size 915mmx460mm, double bowl (each bowl size 410mm x 330mm x 160mm), fixed in repairs, complete all as specified and as directed. (Make : Nirali/Jayna/Diamond)
S&F in repairs Stainless steel hanger 450mm long and 50mm wide made out of 1mm thick stainless steel sheet having 6-8 hooks, complete all as specified and as directed.
Fabrication & fixing of Modular wardrobe/ cupboard made out of 18-20 mm thick WPC boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge band including providing cabinet for keeping baskets/ drawers etc. complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent)
S & F for 18-20mm thick WPC boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected. (Make : Rajshree or equivalent)
S & F for Continuous piano type hinges, stainless steel with width of flaps 30mm, complete all as specified and as directed.
S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.
S & F 50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.
S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.
S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed
Supply only Stainless steel Cutlary basket of size 500mm x 370mm x 100mm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel basket (plain) of size 500mm x 370mm x 160mm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
Supply only Stainless steel bottle full out of size 500mm x 400mm x 160mm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers as approved by Engr-in-Charge.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
Attending complaints related to carpentry job on an average of 10 complaints per day. Contractor to detail rep to collect complaint slips from Parade Road MES complaint cell by 10:00 AM and completion report of attending complaints to be submit by 1800 hrs on all working days. Note:- (1) Necessary T&P, safety gear and ladder required to attend the complaints shall be provided by the contractor. (2) Minor stores like nails, screws, other small articles etc shall be provided by the contractors (2) All other stores shall be provided by the department. (4) Failure to attend the complaints within given time, the contractor will penalise Rs.500/- per complaint for every 24hrs of delay.
Attending complaints related to Plumbing job on an average of 10 complaints per day. Contractor to detail rep to collect complaint slips from Parade Road MES complaint cell by 10:00 AM and completion report of attending complaints to be submit by 1800 hrs on all working days. Note:- (1) Necessary T&P, safety gear and ladder required to attend the complaints shall be provided by the contractor. (2) Minor stores like nails, screws, dhaga, white cement, M seal and other small articles etc shall be provided by the contractors (2) All other major stores shall be provided by the department. (4) Failure to attend the complaints within given time, the contractor will penalise Rs.500/- per complaint for every 24hrs of delay.
Attending complaints related to Masonery work on an average of 02 complaints per day. Contractor to detail rep to collect complaints from Parade Road MES complaint cell by 10:00 AM and completion report of attending complaints to be submit by 1800 hrs on all working days. Note:- (1) Necessary T&P required to attend the complaints shall be provided by the contractor. (2) Minor stores like nails, screws, dhaga and other small articles etc. and safety gear shall be provided by the contractors (2) All other stores shall be provided by the department. (4) Failure to attend the complaints within given time, the contractor will penalise Rs.500/- per complaint for every 24hrs of delay.
M & L for 40mm thick PCC 1:2:4 type B-1using 20mm graded agg.as in floor etc finished even & smooth using extra cement incl demolition of cement concrete complete all as specified and directed.
S & F for wooden coloured interlocking tiles (Wooden Flooring) 1215x168x8mm thick rectangular fixed in floor/dado laid over existing floor with foam sheet of approved best quality including joint/end covering strip including all other fixing materials complete. (Make : Kajaria catalog No AC 3 or equivalent).
M & L for Rolled sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A including dismantling structural steel work of any description not otherwise provided for, complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
S & F 2-3mm thick fibre glass reinforced translucent Plain/corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type complete all as specified and directed.
M& L for screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound, including taking down existing roof treatment of any type and also taking down cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item.
Supply only water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes:- (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher and E-way Bill shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Online Payment proof to authorised applicator shall be submitted by contractor. (5) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M & L for 50mm thick PCC 1:4:8 type D-2 (using 40mm graded agg) as in sub base complete including demolition of existing PCC n.exc 15cm thick complete all as specified and as directed.
M & L for Machine pressed precast cement conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 50mm thick sand cushion including dismantling of existing Interlocking tiles of any type/size and in any position complete all as specified.
M & L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry,laid over and including 15mm thick screed bed in CM 1:6 as in floors including dismantling of existing chequred tiles of any type/size and in any position complete all as specified.
S & F for wall cladding tiles of size 300mmx600mmx10-12mm thick on vertical surfaces of wall over and including 10mm thick cement plaster in CM 1:4 (Make : Unistone/ultra or equivalent) and as per sample approved by GE including dismantling of old tiles with backing complete all as specified and as directed.
S&F Solid PVC wall panelling consisting of 8-10mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site including dismantling of old wall panelling of any description, complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of existing PCC of any type n.exc 15cm thick complete all as specified.
garnet engineers contractors
LAXMI GROUP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .