REPAIR AND MAINT TO INTERNAL ELECTRIFICATION WORK IN CERTAIN BLDGS OF ALL RR UNITS OF HQ CIF(K) UNDER AGE (I) CIF (K)

Amount

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents, regulators, socket, lamp holders brackets,bulk head fitting, etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc, complete all as specified and directed by the Engineer-in-Charge.

M&L for point wiring using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) wiring with FRLSH cable PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and including PVC casing caping/ PVC conduit of suitable size with all accessories and earth continuity connected to common earth duly accommodate modular box surface/ flush type with modular white cover plate with frame for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed by the Engineer-in-Charge for the following:-

One light /fan/bell point controlled by one No, one way 5 Amps switch, complete all as specified and as directed by the Engineer-in-Charge.

One light point controlled by two Nos, two way 5 Amps switches, complete all as specified and as directed by the Engineer-in-Charge.

One multi pin socket outlet, 5/6 Amp, controlled by one No. one way switch on independent board, complete all as specified and as directed by the Engineer-in-Charge.

One multi pin socket outlet, 5/6 Amp, controlled by one No. one way switch on same board, complete all as specified and as directed by the Engineer-in-Charge.

One bell/buzzer point controlled by one bell switch, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 02 here-in-before ,but for one socket out let 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and unsheathed electric cable 1100 volts (ISI MARKED) including PVC insulated and unsheathed electric cable 1100 volts, 2.5 sqmm copper stranded conductor as continuous earth wire connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.

S & F modular switch piano button flush type, single pole one way 6 amps complete all as specified as directed.

S & F modular socket 6A, 2/3 pin combined 2 module complete all as specified as directed.

S & F modular switch piano button flush type, single pole one way 16 amps complete all as specified as directed.

S & F modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified as directed.

S&F ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge.

S&F Fan step modular regulator, 120W- 2 module, complete all as specified and directed.

S & F modular bell push 6A, 1 module, one way, complete all as specified.

S & F White cover plate with frame, 2 module, complete all as specified.

S & F White cover plate with frame, 3 module, complete all as specified.

S & F White cover plate with frame, 4 module, complete all as specified.

S & F Metal flush box 1/2 module, complete all as specified.

S & F Metal flush box 3 module, complete all as specified.

S & F Metal flush box 4 module, complete all as specified.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB TPN, horizontal type, 440 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement Sheet metal enclosure factory made shutter type for MCB DB SPN, 240 Volts, 2 ways with 200 Amps rated bus bar, neutral link, earth bar complete.

S&F in replacement MCB SPN 40 to 63 Amp, 10KA, 240 Volts, complete all as specified.

S&F in replacement MCB SP 5 to 32 Amp, 10KA, 240 Volts, complete all as specified.

S&F Switch piano, flush type 5 Amp, one way, complete all as specified.

S&F Switch piano, flush type 5 Amp, 2 way, complete all as specified.

S&F socket outlet 2-in-1, 3 pin 5 Amp flush type, complete all as specified.

S&F Switch socket combination 5 in 1, 5 & 15 Amp flush type, complete all as specified.

S&F bell push flush type, single pole one way 5 Amp, complete all as specified.

S&F Call Bell ding dong AC, 230 Volt single Pole, complete all as specified.

S&F stepped type Electronic fan regulator, flush type, 300-400 watts complete.

S & F LED luminaire 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light (warm/white) comlete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.

S&F LED Lights fitting 20 watt, 220V, AC Decorative box type with driver (warm/white), holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply & replacement for angular type Lamp holder PVC polycarbonate type with back plate including Lamp 9 Watt complete all as specified.

S&F Edgepro round shaped 6 watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light (warm/white) comlete with drivers, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.

S&F Edgepro Square slim-fit low profile downlights 25W, engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen output Cat No- EDGEPROSQDLR25WLED857S of Havells or equivalent in Bajaj/Crompton Greaves/Phillips

Supply and Replacement of MCCB 4 pole 440 volt 125 Amp rating capacity in 36 KA complete all as directed.

Supply and Replacement of MCCB 4 pole 440 volt 160 Amp rating capacity in 36 KA complete all as directed.

M&L in replacement Sub main wiring of two single core PVC insulated and unsheathed cable with 6 sqmm FRLS multi-stranded copper conductor drawing in PVC casing caping/PVC conduit as per site requirement including PVC bend,corner junction etc with 6 Sqmm PVC unsheathed copper conductor (multi-stranded) as continuous earth wire including taking down existing wiring complete all as directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

M & L for Sand cushioning for cables all as specified in 19.75 of SSR Part-I. Note:- Punned thickness of sand shall be measured.

Material and labour for sub class B brick old size covering laid dry ,flat transversely along the length of cable on sand cushioning with width eqal to the length of the brick complete.

Supply, fixing & laying GI pipe light grade 50mm bore in trenches, under floor, wall and on pole for cable protection.

Taking out & removing old unserviceable UG cable and supply and laying 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor cable of size 25 Sqmm 4.0 core in trenches, through pipe, under culvert or in air complete all as specified and directed. Note:- Earthing work, Sand cushioning and Brick shall be measured and paid separately

Earthing complete with galvanised earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion.

Supply and fixing 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat or circular 6sqmm 2 core.

Supply and fixing 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat or circular 10sqmm 2 core.

Note :- An amount of Rs. Rs 14,900.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SHIMAR STAR GLACIER (BID ID -3304909)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3305513)

M/S N A Enterprises (BID ID -3305186)

M/S JIWANRISAM SERVICES PRIVATE LIMITED (BID ID -3305226)