Repair and Renovation of 26 S Quarter in canal colony Gidderbaha.

Dismantling Reinforced cement concrete

Scraping White Wash and Colour Wash (Interior)

Scraping White Wash and Colour Wash (Interior)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface & interior

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. two or more coats to give an even shade

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Cement Concrete 1:8:16 With Stone aggregates 40 mm gauge mixing by manual means

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing

Providing and fixing 110 mm dia . U.P.V.C Rainwater pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Polythene films/ sheet of 100, 125, 150,200, 250 micron

12.5 mm thick cement plaster 1:4

Cement pointing 1:2 deep variety

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. ( Also not to used over footoaths).

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).. (600x600mm)

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 mm & 300x300mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600X600 mm.

Wiring in PVC Insulated copper conductor single core fR cable (ISI marked) overall 1.5 sq.mm, 1100 volts grade to be laid in heavy gauge welded condult pipe 20mm/25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxesn (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp, 2/3 universal socket (shuttered), 6/10Amp. Switches, 16/20Amp. Switches with indicator etc. and covered with Frame Plate etc., PVC connector (for Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metalfan box (1.6mm tyhick shape hexgonal), CI Circular junction Boxes (Four way 11/2" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1 sq.mm, 1100 volts grade (For 6 Amp wall socket & plug control point)n and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface)Wiring fan point (With fan box)

Wiring in PVC Insulated copper conductor single core fR cable (ISI marked) overall 1.5 sq.mm, 1100 volts grade to be laid in heavy gauge welded condult pipe 20mm/25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxesn (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp, 2/3 universal socket (shuttered), 6/10Amp. Switches, 16/20Amp. Switches with indicator etc. and covered with Frame Plate etc., PVC connector (for Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metalfan box (1.6mm tyhick shape hexgonal), CI Circular junction Boxes (Four way 11/2" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1 sq.mm, 1100 volts grade (For 6 Amp wall socket & plug control point)n and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface)Wiring light point

Repairing of doors / windows

Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position paneleld, glazed or glazed and panelled 40mm thick (Single leaf)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm X 16mm

Excavation manually in trenches with straight or open cutting in built up street/ lane having wall to wall width of street/ lane upto 3.0 metre, for intramural sullage drains, extramural intercepting drains and outfall drains, storm water channels and other work contingent or incident thereto, to full dimensions and depth as shown on the drawings or as shall be required by Engineerin- charge including dressing to correct sections and dimensions according to templates and levels, dewatering of rain water, diversion of traffic. Providing and fixing and maintenance of caution boards, fencing, night signals, for leads upto 15m and for all lifts and subsequent refilling, watering and dressing upto groung level, including removal of surplus spoil from the site upto 15 metre distance complete in all respects. All classes of soil except rocky

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 160mm o/d pipe

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. For pipes 100 to 250 mm Diameter

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks

Providing and fixing in position Chinaware Indian Orisa water closet sizes 580 x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of engineer in charge.

Providing and fixing jet spray with 2-6" long PVC pipe with CP Brass nut

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. Size 560mm x 430 mm

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm

Providing & Fixingin postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. PTMT Pillar tap

Providing & Fixingin postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P. brass Bib cock 15 x 400 gm

Providing & fixing in position PVC flexible tube connection of approved make ( To the approval of Engineer in charge ) complete in all respect. PVC tube connection of size 15mm x 450 mm with C.P Brass nut.

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make ( to the approval of Engineer in charge ) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 160mm o/d pipes Elbow 90 Degree (All side socketed)

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make ( to the approval of Engineer in charge ) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 160mm o/d pipes. Vent Cowls

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make ( to the approval of Engineer in charge ) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110mm o/d pipes P trap/Floor trap 110mm x 110 mm

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make ( to the approval of Engineer in charge ) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110mm o/d pipes P trap/Floor trap 110mm x 75 mm

Providing and fixing in position SWR UPVC specials for soil waste vent or anti syphonage pipes as per as per IS - 14735 of approved make ( to the approval of Engineer in charge ) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining for 110mm o/d pipes Single Y-Junction

Providing and fixing in position GI Tank Nipple of approved make (to the approvel of of Engineer in charge) in PVC Water storage tanks complete in all respect. GI tank nipple 25mm i/d.

Providing and fixing in position GI Tank Nipple of approved make (to the approvel of of Engineer in charge) in PVC Water storage tanks complete in all respect. GI tank nipple 20mm i/d.

Providing and fixing in position automatic brass ball Cock in tanks. Plastic Ball cock with rod and plastic ball 25mm i/d

Concealed In Wall: Providing and fixing Chlorinated Polyvinyl Choloride ( CPVC) pipes as per IS 15778 ( ISI marked with the prior approval Engineer in charge)having thermal stabilty for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe withclamps at 1.00 m spacing including jointing of pipes & fittings with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer in charge. SDR 11 CPVC Pipes & fitting 20mm o/d

Providing and fixing Chlorinated Polyvinyl Choloride ( CPVC) pipes as per IS 15778 ( ISI marked with the prior approval Engineer in charge)having thermal stabilty for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe withclamps at 1.00 m spacing including jointing of pipes & fittings with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer in charge. CPVC SDR 11 Pipe & fitting 25mm o/d

Providing ISI Marked G.M ferrule as per IS:2692, drilling and tapping cast iron pipe lines of all diameters and screwing in Ferrule And connections complete in all respect. 20mm i/d Ferrule Medium

Providing, Fixing and jointing GI Union Couplings ( of approved make with the approval of EIC) as per IS 1879 in GI Pipe lines complete in all respect. 20mm i/d GI Union.

Providing, Fixing and jointing GI Union Couplings ( of approved make with the approval of EIC) as per IS 1879 in GI Pipe lines complete in all respect. 25mm i/d GI Union.

Providing, fixing and jointing ISI Marked Gun-Metal peet valves ( Heavy Pattern) as per IS 778 with hand wheels, on GI pipe lines laid in the ground or inside buildings including all carriages complete. 20 mm i/d Gun Metal peet valve heavy pattern.

Providing, fixing and jointing ISI Marked Gun-Metal peet valves ( Heavy Pattern) as per IS 778 with hand wheels, on GI pipe lines laid in the ground or inside buildings including all carriages complete. 25mm i/d Gun Metal peet valve heavy pattern.

Supply and complete fitting of motor pump set of 1/2 HP

Providing and fixing bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Sal wood in scantling of section 50 x 25 mm, fixed with nails and 4 mm gauge G.I. wire on existing support and coloured with green colour complete as per directions of Engineer-in-charge

THE EKAM COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED