WALL REPAIR WORK IN GANGAPOL DARWAZA BOUNDARY WALL OF DAMAGED PARKOTE LOCATED IN HAWAMAHAL ASSEMBLY AREA

Amount

(1.2) Removal of debries from the monument carefully without damaging the buried architectural parts of the monument and collect all the intact parts at proper place for reuse at the time of restoration work as per direction of Engineer incharge/site encharge and disposal of building rubbish with in 50mtr.lead

Add extra for sorting lifting & stacking charges for architectural parts with in 50mtr.lead (Labour charge.)

(7.13) De-vegetation from monument by removing bushes, trees including complete uprooting from the wall & roofs/structures carefully including sutaible chemical treatment to roots to avoid further growth including disposal of rubbish with in 50mtr. Lead as per direction of Engineer incharge.

(5.27) Providing and laying lime concrete in foundation and plinth using 40% lime mortar and 20mm nominal size graded aggregate (crusher broken ) including ramming and watering complete in all respect comprising of : ( 1 Lime putty : 2 Surkhi mortar.)

(5.24) Random Rubble stone masonary for foundation and plinth in Lime surkhi mortar 1:2 above 30cm. thick walls in : ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.)

(5.25) Random Rubble stone masonary for superstructure, 4.50mtr. Height above plinth level/ one storey height above 30cm. thick walls in : Lime surkhi mortar 1:2 ( 1 Lime putty : 2 Surkhi including adding admixture like gur, methi etc. in mortar.)

(5.23) Construction of "Kangoora" with stone masonary in grinded Lime surkhi/ sand mortar 1:2 on fort wall as per existing matching & traditional practice including making holes and teerkash etc. matching with existing work complete in all respect including all scaffolding with all

(7.2) Making Kangura on top of the wall as per jaipur traditional practice with tile brick in grinded lime surkhi mortar 1:2 thickness of kangoora 15cm & height 45cm, finishing with lime surkhi mortar 1:2 complete in all respect upto 10.00 mtr.from ground level including all scaffolding, lead & lift.

(5.13.1) Providing and fixing fine dressed sand stone "Dasa/coping" as per existing matching , fixing in grinded lime surkhi mortar 1:2 including pointing in cream and stone powder 1:1 with an admixture of pigment to match the shade of stone complete in all respect 75mm to 100mm thick plain with fine dressing.

(2.2) Lime Surkhi Mortar 1:2 (1 Lime putty : 2 Surkhi)

(3.1.2) Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in 3 course for base coarse and subsequent course & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work is of restoration nature as per Jaipur practice including adding gur,methi & gugal on old walls including removal of all old loose and decade plaster, each coat to be done after 3 days of previous coat 45 mm thick in four coats

(3.4.1) Add extra for decorative/ornamental Lime surkhi 1:2 plaster work with fine finish making kangoora, flowers, geometrical designs upto (khat) including preparation of Lime surkhi mortar 1:2 as per tradititional practice adding gur,methi,gugal etc. Upto 25mm thick/depth

(3.7) Add extra over item no. 3.1 to 3.3.3 for Lime plaster work done over curved/circular masonary work (curved or circular surface.)

(3.9) Flush pointing over joints of dressed stone cladding, chajjas, jali etc. with neat cement, sand & colour including racking the joints as per Jodhpur practice including all leads and lifts with grinded mortar of lime putty and stone powder mixed in 1:1 ratio and gur, methi, gugal etc. are to be mixed as per old traditional practice

(4.3) Khamira Colour Washing as per old traditional practice to prepare the Khamira the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding cured, Gugal, for non-synthetic colour adding gum (babool gum) as per specification.Then applying prepared solution on walls three to four thin coats as desired finishing.

(4.6) Providing & applying Lime kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manually on lime base,on all flat surface in two coats.First coat applying 3mm to 4mm thick and curing properly at least 7 days,second finishing coat done after 7days of previous coat as per traditional practice.(thickness not more than 6 mm.)

(4.7.2) Add extra for Lime kara work (on lime plaster base) other than flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on :

(7.1) Tuman masonry by brick bats/ stones in grinded mortar of Lime Surkhi mortar 1:2/lime sand mortar 1:2 including racking and removal of all old loose plaster and cleaning the wall surface properly as per direction of Engineer Incharge.

(5.3) Providing & fixing ashlar "Rain water Spouts" (3) lines dressed as per traditional practice / existing design / approved design size 60 x 30 x 25 cm, fixing the rain water spout with lime surkhi mortar 1:2, with proper slope complete in all respect.

(7.9) Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150mm thick as per specifications. Including dismantling of old detoriated roofing

ANU CONSTRUCTION CO.

ANU CONSTRUCTION CO.