REPLACEMENT OF ASBESTOS SHEET WITH PRE PAINTED GALVALUME SHEET AND OTHER CONNECTED WORKS OF BR EM IN BLDG NO P10 AND PROVN OF HARDSTANDING INFRONT OF HQ JB SUB AREA BLDG AT DANAPUR UNDER GE DANAPUR CANTT

Dismantling timber scantlings 40 Sqcm and over in section, in any position under framed work complete all as directed.

Dismantaling of Asbestos cement/GI (corrugated/semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof , fixed with self tapping screws complete all as specified and directed.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof Ridgel, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed. Make- Armstrong, Hunterdouglas etc

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises all as specified.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M&L Machine cut Kota stone slab flooring 20-25mm thick as in riser, steps & skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing, polishing & rounding to edges complete incl 15mm thick plaster in CM 1:4 complete all as specified.

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm in floors etc over and including 15 mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white or cement with pigments to match shade complete.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 Sqm , in vertical surface such as skirtings, dados etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles over and including, 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm & not exceeding 0.18 sqm in floors etc with and including over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry and pointed with white cement mixed with pigments to match with shade of tile complete.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, exceeding 0.42 sqm n exc 01.0 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry with white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, exceeding 0.42 sqm n exc 01.0 sqm as in vertical surface skirtings, dados etc, over and including 10 mm thick cement plaster in CM 1:4 set and jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L for glazed ceramics coloured tiles of size 450x300x7mm thick in vertical surfaces such as skirting/dados/wall, etc with and including over 10mm thick rendering in cmeent mortar (1:4) set and jointed in neat cement slurry and pointed with white cement mixed with pigments to match the shade of tiles complete all as specified & directed.

M&L 25 mm thick plain cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone agg) in fdn, sub base, foundation filling and mass concrete & cinder concrete etc. complete.

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc all complete.

M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete.

Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

All as per above item No 35 but exc 1.5 Sqm but n.exc. 4 Sqm each.

Taking down shutter of any description exc 1 sqm and n exc 2 sqm each and removing to store.

S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair Door closer hydraulically regulated cast iron body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as spfd & directed.

M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed.

S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips.

Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete.

M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of weather coat paint (apex) over a coat of primer complete all as specified and directed.

M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by eng in charge.

M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed.

M&L for treatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

M&L IInd class hard wood in scantling clean sawn scantling as in timber frame work complete all as specified and directed.

All as per item No. 67 here-in-before but except timber.

M&L for 18-20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete.

S&F aluminium partition wall with following specificaiton complete all as specified and directed by Engr-in-Charge : (a) Vertical member of size 63.50 x 38.10 x 1.85 [email protected] Kg/RM (b) Horizontal, top,middle and bottom member of size 63.50 x 38.10x 1.95 mm @ 1.092 Kg/RM (c) Partialy 5mm thick Aluminium Composite Seat decorative (d Partialy 5 mm thick tinted glass. (e) Aluminium and PVC beading as per requirement as in fixing for particle board and glass.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 83.50 x 44.45 x 1.87 mm thick weight @ 1.30Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 95.25 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc.

S & F in repair powder coating aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.36 mm dia stainless steel wire netting mosquito proof aperature 1.40mm with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum beading and rubber gasket as per requirment as in fixing for paticle board & Glass, joining cleat including locking arrangement. etc

M&L for durastone heavy duty coloured vitrified tiles 300x300x7-8 mm thick exterior grade set and jointed with neat cement slurry over 1and including 20 mm screed bed in cm (1:6) and jointing mix with pigment in cement to match the shade of tile complete all as specified and directed.

Surface excavation n exc 30 cm deep and average 15cm deep and getting out in soft/loose

Boring holes 2 m deep in soil for single under reamed piles and getting out and disposal out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm)

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil.

Retuning filling in including spreading, levelling, watering and well ramming in layerss, not exc 25 cm in soft/loose soil.

Removing excavated material n exc 50m and depositing where directed at level n exc 1.5m above the starting point.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd. 6mm joints should be filled

M&L for hard core of gauge n. exc 63mm deposited, spread and levelled in layers n.exc 15cm thick with broken brikcs, watered and rammed to a true surface complete all specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete etc complete all specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete all specified and directed.

Formwork to sieds of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete.

S&F Mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

Ditto all as per item No above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 20mm thick machine cut granite stone slab as in bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding polishing complete including 15mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for 20mm thick machine cut granite stone slab as in skirting/dado, over RCC Slab and pointed with white or coloured cement pigment to match over and including 10mm thick on backing coat in CM 1:4 complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls as directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Ditto- all as item No. 92 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

Ditto -all as item No.92 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

All as per item no 92 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

supply .laying ,and fixing for alluminium unarmoured cable 1100V grade 16 sqmm 4 core in casing caping/ through saddle on wall complete all as specified and directed.

S & F Modular metal flush box 1/2 module

S & F Modular metal flush box 3 module

S & F Modular metal flush box 4 module

S & F Modular metal flush box 6 module

S & F Modular metal flush box 8 modules(Horizontal)

S & F Modular metal flush box 12 (3 row x4) modules

S & F modular white cover plate 1 module

S & F modular white cover plate 2 module

S & F modular white cover plate 3 module

S & F modular white cover plate 4 module

S & F modular white cover plate 6 module

S & F modular white cover plate 8 (Horizontal) modules

S & F modular white cover plate 12 (2 x 6) modules

Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed.

Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed.

S&F electric bell ding dong type AC 230 Volts, 50 Hz single pole complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs and connecting up with existing cable complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 100 Amp in the DB complete with connection testing and commissioning complete all as specified and directed.

S& F for sheet metal enclousre factory made for MCB DB's SPN, 12 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete all as specified and directed.

S&F MCB SP 240 Volt 6- 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F MCB SPN 40-63 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Supply & fixing fan regulator, modular type, socket type compatible for BLDC fans ,single phase complete all as specified and directed.

S&F single pole and neutral encl 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing LED lights fitting 1x20W, 220V, AC decorative box type (enhance safety) with high quality polycarbonate diffuser, 4ft, 2000 lm, voltage protection range 140v-270v, NW 4000K, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency warm type PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all specified and directed.

Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and directed including taking down old unsv one and deposit in MES store for BER.

Please Enable Macros to View BoQ information