Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.6 LAccepted-AOC SPRINGDALE MARKET SEC 123 SUNNY ENCLAVE MOHALI 140301 | MOHALI | S A S NAGAR | PUNJAB | 140301 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹47.1 L+₹7.8 L (19.8%)Rejected-Finance H NO 312 B D C OPP PLOT NO 23 TRANSPORT AREA SECTOR 26 CHANDIGARH | CHANDIGARH | CHANDIGARH | CHANDIGARH | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹48.3 L+₹9.1 L (23.1%)Rejected-Finance | L3 | Rejected-Finance Other Than Lowest Bidder | |
| 4 | L4₹49.0 L+₹9.7 L (24.7%)Rejected-Finance 411 STREET NO 4 PANCHVATI NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Other Than Lowest Bidder | |
| 5 | L5₹51.2 L+₹11.9 L (30.2%)Rejected-Finance HOUSE NO 3363 SECTOR 27 D CHANDIGARH | NA | NA | 160001 | L5 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹48.5 L
EMD Value
₹97,000
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
ADDN/ALTN TO BLDG NO. T-70, T-127 AND T-34 OF CERTAIN UNITS INCL CERTAIN SANCTIONED, REVENUE AND MINOR WORKS OF B/R NATURE AT N AREA UNDER GE CHANDIGARH
2022_MES_563889_2
GE/CHD-67/2022-23
Open Tender
Civil Works
Item Rate
240 days
Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹97,000
Yes
8 Feb 2023
26 Dec 2022
16 Jan 2023
26 Dec 2022
14 Jan 2023
2 Jan 2023
26 Dec 2022 - 31 Dec 2022
Amount
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc and getting out in soft/loose soil complete all as specified.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified.
Removing excavated material to a dist exc 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) as in hard/dense soil each n exc 0.5 cu.m, getting out, complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section embedded Concrete, brick work, masonry etc including taking out embedded portion and making good disturbed portion all as specified
Taking out/dismantling of exsting barbed wire fencing in any position of any size complete all as specified and directed.
M&L PCC 1:3:6 type C2 (using 40mm graded aggregate) in fdn, filling, mass concrete, PCC Block for Steel Post etc including necessary form work complete all as specified.
M&L Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified.
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified.
M&L for RCC M-25 (nominal mix concrete) (20mm graded aggregatesas) as in foundations, including rafts, footings, foundation beams; plinth beams lintel beam bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for RCC M-25 (nominal mix concrete) (20mm graded aggregatesas) in Columns, pillars, piers, posts and struts complete all as specified.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surfaces of concrete flat complete all as specified.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter complete all as specified.
M&L for RCC (nominal mix concrete) 20mm graded aggregatesas) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the complete all as specified.
M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in cover slabs for Platforms / shelves etc of any thickness/size, set in cm 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately
M&L for formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M& L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
High yield strength deformed TMT steel bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding and stirrups with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each( without taking off shutters from the frames) complete all as specified.
Taking down Chowkhats or frames exc. 1.5 sq. m but n exc. 4 sq .m each( without taking off shutters from the frames) complete all as specified.
Taking down shutter exc.1 sqm and not exc 2 sqm each complete all as specified and directed.
M& L for Pressed steel frames of profile size 125mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including one shop coat of red oxide primer including hole fast fixed to wall PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.
M& L for Pressed steel frames of profile size 105mm x 60mm in section fabricated with 1.25mm thick mild steel sheet for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & including hole fast fixed to wall one shop coat of red oxide primer PCC 1:2:4 in backfilling of chowkats complete all as specified and as directed.
S&F 35 mm 2nd class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F 35 mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifeid and directed.
S&F Factory made, 35 mm thick for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specifid and directed.
S&F 150mm extruded aluminium alloy handles powder coated, fabricated type.complete all as specified
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
M&L for two coat of synthetic enamel paint over one coat of red oxide on new steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
M&L for two coat of synthetic enamel paint over one coat of red oxide on old steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
M&L for two coat of synthetic enamel paint over one coat of pink primer on new wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
M&L for two coat of synthetic enamel paint over one coat of pink primer on old wooden Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.led in any mortar all as specified and directed.
M&L for 16-18 mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:4 complete all as specified.
M&L for 16-18 mm thick Machine cut kota stone slab as in riser of steps, skirting, dado and pillar laid over 10mm thick rendering in CM 1:3. cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing including complete all as specified.
M&L for framed work as, doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.
S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed. Note for item No 38 & 39 :- Glass / wire gauge shall be measured and paid separately.
S&F steel ventilator (Box type) with top hung shutter including hinges, steel peg towerbolt complete all as specifed and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 complete all as specified.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required exc. Half brick but not exc. 1 brick. complete all as specified.
S&F 4.00 mm thick plain sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins, arches, pillers etc but excluding ashlar facing etc complete all as specified.
M&L for Brickwork with subclass ‘B’ brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in CM 1:6 complete all as specified and directed.
All as item no. 46 above but except bricks in CM 1:4
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified.
Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.
M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) finished fair and even smooth finish complete all as specified and directed.
M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement all as specified and directed.
M&L three coats of white wash on wall on newly plastered surfaces including prepraration of surfaces complete all as specified.
M&L two coats of cement base paint on walls on newly plastered surfaces including prepartion of surfaces, alkali resistant priming coat complete all as specified and directed.
M&L for applying two coat of white wash on old wall surface including preparation of brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts including cornices etc and complete all as specified & as directed.
M&L for applying two coat of cement base paint on old wall surface for complete removal of existing treatment including preparation of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts cornices etc complete all as specified & as directed.
M&L for preparation of newly/old plastered surface of walls and applying two coats of weather guard exterior emulsion paint over a coat of alkali resistant primer complete all as specified NOTE: Make/Brand : Asian paint (Apex Ultima), Berger paint ( weather coat all guard) Dulux ( weather shield max), Nerolac (Excel Total).
M&L for two coats of oil bond distempering on old wall surface including putty chalk whiting, preparation, complete removal of existing treatment all as specified.
M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour coted tile roofing sheet having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
M&L for flush shutters, 25mm thick solid core construction, with block board core and plywood face panels, commercialm type on both sides complet all as specified and directed.
S&F Steel tubular section tubular trusses rafter, purline etc of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.
S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment Fe 410 complete all as specified
M&L 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor finished rough complete all as specified
S&F Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchd jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.
S&F Coloured Glazed ceramic tiles in vertical surfaces 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) complete all as specified and directed.
M&L for 18-20 mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform,wall , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including grinding, rounded and chamfered edges and granite polishing etc complete all as specified and as directed.
S&F factory made prepolished precast cement concrete M-30, vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed.
Material & labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in leveling concrete in floor over neat cement slurry with 3 kg per Sqm of wall/floor surface finished even & rough to receive top floor layer/finish complete all as specified & directed.
S&F for applying Two or more coats of 100% Premium acrylic emulsion paint exter grad/inter grad in wall surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces & 1mm thick wall care putty complete all as specified.
M&L for providing and fixing Gyp board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm thick as in ceiling having snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdia GI wire hangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed
demolition of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed
S&F 5 mm thick sheet glass pane tinted type, with 5 micron thick black film ordinary quality and ruber, cleting, silicone,glazing with oil putty etc in each pane complete all as specified and directed.
S&F aluminium powder coated (min thickness of powder coating 50 micron) frame for door , windows, ventilators weight not les than 3 kg/Rm with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified.
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium door shutters, weight not less thn 2.5 Kg/Rm aluminium section including necessary joining cleats/aluminium beading, glazing clips clips, ruber neoprene packing, handles 2 Nos, tower bolt 2 No in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F aluminium powder coated (min thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars,including (double shutter) glazing bars and without glazing bars aluminium sections weighing not less 2.00 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), tower bolt 2 Nos complete all as specified
M&L for toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes side hung, 300mm longe handle, clit, locking arrngment, including floor door spring and complet all accessories arequired completed all as specified.
M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded crushed stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement complete all as specified and directed.
Demolition of RCC of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed
M&L 40 mm thick, cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate, finished even & smooth, as in floors, complete all as specified.
S&F Glass dividing strips, 38mm with and 3 mm thick and inserted in position complete all as specified
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed completed all as specified.
Providing, cement concrete PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
S&F Joist, channel, angle, or tee sections, fixed independently by means of welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated and provn of grooves for barbed wire fencing) confirming Fe 410-W(Gde-E-250) quality B complete all as specified and directed
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed
M&L for Point wiring with copper conductor, single core, PVC insulated, unsheathed stranded FRLS cable (IS 694), including PVC insulated copper multi-stranded conductor cable, unsheathed, of size 1.5 sqmm and one single core earth continuity multi-stranded conductor size 1.50 sqmm green in colour to common earth and connecting to earth dolly with copper crimp of suitable size and including PVC non-mettalic rigid conduit with conduit accessories concealed in walls/ Ceiling / floor etc., including MS box 3mm thick with 3mm hylum sheet cover for fixing of switches/sockets/fan regulators etc, complete all as specified for the One light/ceiling fan/exhaust fan/bell point controlled by one switch.
All as per Item No 89 above but one socket 5 Amp point Independent
All as per Item No 89 above but one socket 5 amp on Same board.
All as per Item No 89 above but wiring with 4 Sqmm for 15 Amp socket outlet point on independent.
All as per Item No 89 but wiring with 2.5 Sqmm nominal area cable for 15 Amp socket outlet three pin Independent point with1.5 Sqmm copper conductor for earthing (green colour).
Taking down Copper / aluminium point wiring ( light, fan, socket, or power ) complete, incl fixture and fitting such as switches, ceiling roses, pendants, regulators sockets, light fittings etc. removing materials to store for keeping in safe custody or for making credit and making good disturbed surfaces of walls, floors etc. complete all as specified.
S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked, complete all as specified.
Supply and replacement of socket 3 pin 15 Amps flush type (ISI marked), complete all as specified.
Supply and replacement of switch piano 15 Amps single pole, AC, 230V flush type ISI marked complete all as specified.
Supply and replacement of socket 5 pin 5 Amp flush type (ISI marked), complete all as specified.
Supply and replacement of switch piano 5 Amps single pole, AC, 230V flush type ISI marked complete all as specified.
S&F of rigid non-metallic PVC conduits with type of junction boxes like elbows, bends, tees, reducers, bell mouth tube ends and incl concealed in walls/ceilings/floors etc, complete for external dia not less than 25mm dia for sub main wiring complete all as specified.
M&L for Sub main wiring with two single core 6 sqmm and one single core 4.00 sqmm as earth continuity cable PVC insulated multi-stranded copper conductor drawn through M&L for FR PVC conduit and inclduding connection at both ends with copper lugs. Colour code for Phase - Red/ Yellow/ Blue, Neutral - Black and Earth - Green complete all as specified.
S & F Fluorecent tube light fitting complete with all accessories 1 x 36 watt with & including tube rod and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block compl all as specified. Make : Bajaj Cat No : BGIR 136 WEB/ Crompton Greaves Cat No : RBA 1214/ Philips Cat No : TMS 122 / 128 HF.
S&F batten holder bakelite complete all as specified (ISI Marked) including connection.
Supply & replacement of factory made sheet metal enclosure for distribution board double door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 8 way suitable for having MCB’s complete all as specified.
S&F MCB, SPN, 240V, 40 to 63 Amps, breaking capacity 10 KA Complete all as specified.
S&F MCB, SP, 240Volt, 5 to 32 Amps, breaking capacity 10 KA, LC series Complete all as specified
S&F stepped type elecronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified.
M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 Sq mm 2 core.
Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I
Supply and laying of unreforced PCC cover class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection complete all specified.
Disconnection and removing the u/s light fitting and S&F LED Batten box type made of CRCA sheet including 1X20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified.
Supply and replacement of socket 3 pin 5 Amps flush type (ISI marked) .
Supply and fix Exhaust Fan of size 300 mm sweep with metalik louvers, working on single phase 230V AC supply complete with nut and bolts and all as directed by Engineer-in- charge.
Supply & fix ceiling fans copper wound complete with and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as directed by Engineer-in- charge.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 Sq mm 3.5 core.
OJHA ENTERPRISES
jaswant singh
M/s Super Trading Corporation
His Construction Company
shree balaji builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .