SPECIAL REPAIR TO BLDG NO 33A (PI STAFF COOK HOUSE) AND BLDG NO 33 (SINGLE PI STAFF LIVING ACCN) AT NCC OTA UNDER GE KAMPTEE.

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering.complete all as specified and as directed

Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed.

S&F mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc confirming to Fe 410-W (Gde-E- 250) quality A.complete all as specified and directed.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw complete all as per manufacturer instructions.

M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping screw complete all as per manufacturer instructions.

Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed.

M & L for joint free coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:4 finished even and fair complete all as specified.

M&L for scratch free light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

All as per item No 9 above but as in skirting with 10mm backing in cement mortar 1:4 complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM 1:4 and aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets.

Material and labour 4mm thick for Non Asbestos, fibre reinforced designer cement ceiling board including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and directed

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specifed and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 16 here-in-above but half brick wall in CM 1:4.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed

M&L rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement complete all as specifed and directed.

M&L for rendering 10 mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed

S&F wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12 mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam,chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for Preparation of old plastered surfaces of ceiling l and applying one coat of white wash complete all as specified and directed.

M & L for prepartion of new plastered surface and applying two coats of oil bound distemper over a coat of Primer and wall care putty complete all as specified and directed.

M & L for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed

M&L complete removal of existing treatment including old plastered surfaces on wall including brooming down or steel wire brushing ,scraping down moulds , washing down and applying two coats of acrylic emulsion weather proof paint apex of Asian 1st quality over a coat of acrylic primer complete all as specified and directed.

Material & Labour for complete removal of existing treatment of old decorated wall surfaces and applying two coat of cement base paint over a coat of cement primer

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed

All as per item No 29 here-in-above but size exc 1.5 Sqm and n.exc 4 Sqm each

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

All as per item No 31 here-in-above but size exc 2.00 Sqm

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for door etc, as specified in SSR part-I, Sec-08, Clause 8.24(a), complete all as specified and as directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers for windows, ventilators etc, as specified in SSR part-I, Sec-08, Clause 8.24(b), complete all as specified and as directed.

Supply and fixing powder coated aluminium door comprising of frame of size 101.6 mm x 44.45 mm x 2.40 mm thick push/pull type glazed door shutter having top and bottom rail of section 83x44.5x2.4 mm and 100x44.5x2.4 mmthick respectively size of styles 80x44.5x2.4mm thick and lock rails of size 100mm x 44.5mm x 2.4 mm thick, including all necessary jointing cleats, rubber packing, anodized aluminium beading for fixing glass pane and including 5mm thick tinted glass in both panels ,Hinges, Hydraulic door closer, mortice lock, stays, door stoppers and aluminium push handles of size 150mm, etc complete all as specified and as directed.

S&F anodised aluminium frame powder coated for partition works, door, windows, ventilator with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

M&L for 5 to 6 mm thick coloured/ fancy type glass good quality and glazing with rubber beading complete all specified and as directed.

Supply & fixing butt hinges medium weight, cold rolled mild steel (ISI Marked) of 100mm size complete all as specified and as directed.

S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of primer to new wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparation of surfaces all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces all as specified and direcet.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

Demolition of un-reinforced cement concrete in any description and in any position and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m complete all as specifed and directed.

M&L for PCC type D2 1:4:8 (40 mm graded aggreate) in foundation, filling and mass concrete/ sub base complete all as specified and directed

M&L PCC 1:2:4 type B-1 (20mm graded stone agg) 100 mm thick in flooring finished cement concrete surface even and smooth using extra cement complete all as specifed and directed.

M&L 75 mm th PCC (1:3:6) Type C2 (using 40 mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement including mastic filling in the joint complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick complete all as specified and directed . Note : Sand cushion will be measured and paid separately

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F in repairs GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified

Supply & fix in repairs GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltr hoisted and fixed in position incl top cover incl dismantling of water tank all as specified in SSR part-I

S&F in 20 mm bore ball valves. high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm -210 Gms) complete. Make : Prayag

S&F in repairs stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type.

S & F in repairs bib tap 15 mm dia cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified

S&F in repairs Pillar tap(half turn) 15 mm dia, cast copper alloy, with capstan heads, chromium plated ,fancy type screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT(Minimum Weight 25 gms)

S&F in repairs Wash Basin oval type (56x41cm) including waste coupling and waste pipe complete all as specified and directed (Make : Hindware, CERA, Prayag )

S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specifed and directed.

S & F chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete.

S & F in repairs Concealed stop cock 15 mm dia cast copper alloy ,Chromium plated fancy type high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed complete all as specifed and directed.

S &F in repairs Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F in repairs PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specifed and directed.

S&F in repairs fancy type curtain Rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. .

S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, cooking platforms etc laid, beddd and pointed in any mortar complete

M&L for Machine cut cudappa stone slab 20-25mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cemnet (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specifed and directed.

Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall /floor /ceiling finishes complete all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 86 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 86 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 86 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 86 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm dia, medium grade, concealed in wall of size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

S&F ceiling rose surface type 2/3 terminal 5 amps complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular switch one way 16A, 1 module complete all as specified and directed.

S&F modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular socket 6A/ 16A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt 2 module complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- CG cat No LDL-20-CDL or equivalent in Bajaj/ Philips/ Luker/ Halonix.

S&F lamp holder isulated body with back plate for angle / batten fitting complete all as specified and directed.

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc) complete all as specified and directed. Make:- CG Cat No LSTS-25-CDL-M or equivalent in Philips/ Wipro/ Luker.

S&F light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make:- Bajaj cat No BIBWP 10W / LBJP 10 CDL of CG

S&F light fitting LED 36W suspended from ceiling including transparent suspension wires, bracket etc and connecting 3 core cable 240V 50Hz complete all as specifed and direceted. Make:- CG Cat No LCLP54-36-CDL or equivalent in Philips / Wipro.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series, complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC (1:2:4) reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washer etc., and connecting up with twin coare twisted flexible copper conductor cable of suitable size from fitting to ceiling roase, and making holes complete all as specified and directed. Make Bajaj/CG/Havells.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.69,678.00]

M/s M.G. Hargunani

DE PRETTY AND CO

M/s DS Khekde

M/s B S Jain

M/s Rahul Traders

Vishwakarma Engineering Works

NORTH INDIA PEST CONTROL

M/s T.S.JOHAR

Bidder Name

DE PRETTY AND CO

Vishwakarma Engineering Works

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL

NEELKAMAL BUILDERS

M/s T.S.JOHAR