Karnataka

AOC

Works

Other Works

Regarding Drilling of New Bore well work in Nekarnagar Rajlaxmi colony at w no-80 Hubali

Directorate Of Municipal Administration

DMA City Corporation Hubballi-Dharawada | Dharwad, Karnataka

Amount: ₹5.0 LCloses: 29 May 2026Closed

Timeline

Published15 May 2026
Closed29 May 2026
Awarded—

Bids

1 Bid29 May 2026

#	Company	Amount	Status
1	NAGARAJ KRISHNAPPA ₹4.2 Laccepted-aoc	₹4.2 L	accepted-aoc

Tender Value

₹5.0 L

EMD Value

₹6,300

Closing Date

29 May 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

VIJAYAKUMAR R

Office Number

Mobile Number

Work Description

Regarding Drilling of New Bore well work in Nekarnagar Rajlaxmi colony at w no-80 Hubali

Tender Information

Tender ID

DMA/2026-27/OW/WORK_INDENT57895

Reference Number

DMA/2026-27/OW/WORK_INDENT57895

Tender Type

Reserved

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

DMA City Corporation Hubballi-Dharawada

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredValid contractor license certificate

RequiredWork done certificate of any construction work 25 percent of amount put to tender

RequiredLine of Credit 30 percent of amount put to tender

RequiredFinancial Turnover certificate from 2021 22 to 2025 26 obtained and certified by the Registered valid chartered Accountant with UDIN Number details

RequiredGST Certificate

RequiredPAN card

RequiredReserved Category Certificate Category-IIA

RequiredDomicile certificate

RequiredInformation on works for which Tenders have been submitted A Existing commitments and on going works

RequiredInformation on works for which Tenders have been submitted B Works for which Tenders already submitted

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission. Tenderers are required to read the bid documents carefully before submission of their bid. The Department is not responsible for any delay caused in accessing the e-procurement portal

Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected. The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

Tender application amount shall not be refundable. Royalty on construction materials and other taxes will be deducted as per prevailing Govt, orders as may be modified from time to time

The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening

If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Commissioner HDMC Hubli from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period

The Tenders/ Bids are invited as per Standard tender Bid Document KW1 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions contained in standard bid document KW1

The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered institution or firms with consultants with the Third Party.The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. List of works for which tenders already submitted and List of existing commitments and ongoing work

The contractor shall carry out the work preferably in 2 shifts to expedite and complete the work in all respects well before the stipulated time. The payments for the wok will be made depending upon the availability of funds. The Applicable GST shall be paid separately

Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2026-27. The Defect liability Period for the work carried out is 360 days (1 years) from DATE OF COMPLETION OF WORK. The time period for completion of the work is 3 months

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,300

Important Dates

Last Activity

29 May 2026

Published

15 May 2026

Download Ends

26 May 2026

BOQ Preview

•

Regarding Drilling of New Bore well work in Nekarnagar Rajlaxmi colony at w no-80 Hubali

•

Geophysical investigation of site for sinking borewell for supplying drinking water to the Habitation either through the hand pump, MWS PWS by vertical electrical sounding by adopting venner or schlum...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

•

of capacity 300 PSIG & above 1100 CMF & above in all strata includingover burdern upto 20 m. Fixing of casing pipes, collars and c...

•

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Refilling available earth around trenches/pipelines, cables in layers notexceeding 20 cms in depth, compacting each deposited layer by ramming afterwatering with a lead upto 50 m, and lift upto 1.5 m....

•

Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....

•

Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...

•

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x4 m2

•

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50mm

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

•

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

•

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990with latest amendments complete with GI fittings (excluding the costof fittings) with cuts and threads wherever necessary, including ...

•

Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...

•

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.

•

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI elbow

•

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any For 50 mm dia GI collar:

•

Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any.50mm

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and constructing stand post 1.22m x 1.22m size for public fountain with R.C.C. post of size 1.22m x 0.38m x 0.10m with top rounded and R.C.C. curb slab of size 1.22m x 0.30m x 0.05m in CC 1:...

•

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

format of bankers certifiate.pdf

Instructions to Tenderers • 0.37 MB

kw-1 57895.doc

Tender Document • 1.01 MB

government notification.pdf

Instructions to Tenderers • 1.75 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

NAGARAJ KRISHNAPPA

₹4.2 Laccepted-aoc