CWE/CHD-68/2025-26 CONSTRUCTION OF PM SHRI SINGLE LAB OF SIZE 7 X 10.60 METRE AT KENDRIYA VIDYALAYA SECTOR 29B UNDER GE CHANDIGARH.

Supply only water proofing compound, ISI marked, complete all as specified.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Excavation over area not exceeding 1.5 metre in depth for foundation etc. and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge.

S&F brass elbow for 20 mm outer dia CPVC Pipe of SDR -11, complete all as specified and as directed by Engineer-in-charge.

M&L for anti termite treatment for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed by Engineer-in-Charge.

M&L for hardcore of gauge not exceeding 63 mm broken bricks, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L for TMT bars, 10 mm dia and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips quality conforming to Fe 500 D complete all as specified and as directed by Engineer-in-Charge.

M&L for TMT bars 5 mm dia & over upto and including 10 mm dia in stirrups, spacers and binders as required complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to sides of concrete foundations, footings, plinth beam, bases of columns and similar work for flat surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, lanidings and similar work; not exceeding 200 mm thick, horizontal or sloping, rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, squares, rectangle or polygon shape including rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports, overhangs etc. also splays between floors and beams, etc. including rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete, Design Mix, M-25, as in foundation including rafts, footings, foundation beams etc., and the like complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete, Design Mix, M-25 as in beams, cantilevers, bressummers, lintels over 1.5 metre span etc., and the like complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:4, finishing the surfaces even and smooth without using extra cement including mixing with water proofing compound complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be paid and measured for separately.

M&L for 5 mm thick rendering in Cement Mortar 1:3, on concrete/ brick surfaces as in ceiling, facia, chajja, etc. finished fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electorde 600 mm x 600 mm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metre below ground level) connected to galvanised earth lead wire 4 mm dia by means of GI bolts nuts, check nuts washer of galvanised iron or steel all as shown in electric plate No 5 of MES SSR Part-I and including excavation & earth work in any type of soil, disposal of soil, providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix (1:3:6) type C-I with 40 mm thick RCC 1:2:4 type B-1, cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering pipe of 20 mm dia GI light grade and 15 mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying of 20 mm dia, CPVC pipes, CPVC SDR 11 and Plain CPVC SDR 11 Plain fittings fixed to walls and ceiling or laying in floors complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of newly plastered/ concrete/ unplastered surfaces of walls and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of new plastered/ concrete/ unplastered surfaces of ceiling and applying Three coats of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L for 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base floor, finishing cement concrete surface even and rough complete all as specified and as directed by Engineer-in-Charge.

M&L for Plain Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed block for hold fast complete all as specified and as directed by Engineer-in-Charge.

Excavation over area exceeding 1.5 metre and not exceeding 3 metre in depth for foundation etc. and getting out in any type of soil complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured tiles, 600 x 300 x 7-8 mm thick, set and jointed with 4mm spacer and grouting the joints of wall with epoxy grout mix of org

S&F Mortice lock, aluminium, vertical type, size 65 mm, 2 levers complete all as specified and directed by Engineer-in-charge.

S&F stainless steel tee hinges, stove enamelled black, medium type and fixed with stainless steel screw, complete all as specified and directed by Engineer-in-charge.

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F vitreous China table top wash basin, white, rectangular bowl, size 550 mm x 400 mm x140 mm excluding taps but including brass waste coupling and pvc waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm Brass, CP, mixer for mixing hot and cold water, screwed down, suitable for table top wash basin, fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F Grating doom, 100 mm size of PTMT (Minimum weight 25 gms) complete all as specified and as directed by the Engineer-in-Charge.

S&F brass Tee for 16 mm outer dia CPVC pipe of SDR -11, complete all as specified and as directed by Engineer-in-charge.

M&L for PVC (SWR) nahani traps/ floor trap, 100 mm dia including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer-in-Charge.

M&L for coloured non-skid porcelain tiles, exterior grade, 300 mm x 300 mm x 15 mm thick, heavy duty (Endura from Johnson or Equivalent in quality) as in floor, set and Jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.

M&L for 30 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor finishes, finishing the surface even and rough to receive the top finishes like kota stone/ floor tiling complete all as specified and as directed by Engineer-in-charge.

M&L for 10 mm thick cement plaster in Cement Mortar 1:3 using WPC on RCC roof slab including cleaning of existing surface complete all as specified and as directed by Engineer-in-Charge. Note : WPC shall be measured and paid for separately.

M&L for applying evenly a tack coat of industrial bitumen 85/ 25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-charge.

M&L for providing 25 mm thick cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) in roof kerbs, mud stopes or roof padding complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparing the roof surface by cleaning throughly to achieve a smooth surface and applying APP based polymeric membrane minimum weight 3.0 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gm/sqm) laid over and including priming surfaces with primer of same manufacturer @ 0.40 Litre/Sqm and laying APP membrane on Primed surface by torch application and sealing all joints and overlapping between super multi polyplus shall be minimum 15 cm seam in width/ length wise complete all as specified and all as per manufacturer's instructions and as per the direction of Engineer-in-Charge.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and including 20 mm thick cement sand mortar 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed by Engineer-in-Charge.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, 30 mm width of flaps when opened complete all as specified and directed by Engineer-in-charge.

NOTE: (i) The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per site requirement etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and m

M&L for preparation of newly plastered surfaces of walls and finishing with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm using mechanical means/ hand roller over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including 1mm thick cement based wall care putty as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge.

M&L for 40mm Damp proof coarse in cement concrete 1:2:4, type B-0 to horizontal or vertical surface including necessary formwork complete all as specified and as directed by Engineer-in-Charge.

All as per serial item 81.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge.

aking good the disturbed surfaces to match with existing. (iii) Instruction for point wiring to be followed/compiled strictly as per Para 1 (a) to (q), Page Ser No 439 of SSR Part-II of 2020.

S&F modular socket outlet 2 in 1, multipurpose, 6/16 Amps, two module, 230 volts complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing MCB, SP, 6 - 32 Amps, 'B' Curve, breaking cap 10KA, complete all as specified and as directed by Engineer-in-Charge.

S&F sheet metal enclosure, SPN, with a two pin and earth plug socket with and including one single pole MCB of capacity 20 Amp, 240 volt complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with canopy, Fan hook box type for hanging with complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

S&F in repair SLIM LED batten with polycarbonate housing and diffuser with elegantly designed end caps 1 x 20W, 220 V, AC connecting up with three core flexible of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge.

Note: The unit rate includes for protection pipe 15 mm dia and GI wire from top of the earth plate upto 7.5 metre length.

M&L for Sand cushioning to UG cable 8cm thick before laying the cable and 15cm above the cable as specified in SSR to under ground cable including punning down of sand in layer complete all as specified and as directed by Engineer-in-charge. Note: (i) Consolidated/ Punned sand thickness shall be considered for purpose of payment. (ii) Sand shall be same as specified for plastering work.