REPAIR TO PLUMBING, SANITARY FITTINGS, RAIN WATER PIPES, ROOF ETC IN ZONE A, B, C, D AREA OF RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, complete all as specified & directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering, complete all as specified & directed.

Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

Non asbestos 4mm thick board (classic) of size 600x600mm laid on and included GI snap grid frame work (Grid size 605x605mm) for false ceiling with powder coated GI angle of size 25x25mm, main runner ‘T’ of size 25 x 40mm, secondary runner ‘T’ of size 25x30mm suspended with 3mm GI wire with butterfly clips for levelling, complete all as specified & directed. Note : 1. Quoted rates are inclusive for making holes, cutting chassis and making good to existing walls in cement mortar 1:3 or PCC 1:2:4 type B-1 as per existing finish all as directed at site. 2. All steel members shall be hot dipped galvanised with zinc coating not less than 120 gm/sqm.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws, complete all as specified & directed.

6mm thick asbestos cement, corrugated or semi-corrugated sheeting in roof, walls etc., fixed with L-type or J-type or cranked hook bolts, complete all as specified & directed.

Asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets 6mm thick fixed with L-type or J-type or cranked hook bolts, complete all as specified & directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified & directed.

PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including dismantling of old unserviceable pipe, complete all as specified & directed.

PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including dismantling of old unserviceable pipe, complete all as specified & directed.

110mm bore PVC (SWR) bends any radius with oval access door, complete all as specified & directed.

75mm bore PVC (SWR) bends any radius with oval access door, complete all as specified & directed.

PVC (SWR) junction single (Single T) equal or unequal, 110mm bore with oval access door, fixed in repairs, complete all as specified & directed.

PVC (SWR) junction single (Single T) equal or unequal, 75mm bore with oval access door, fixed in repairs, complete all as specified & directed.

PVC (SWR) branch piece, single (single Y) equal or unequal, 110mm bore with oval access door, fixed in repairs, complete all as specified.

PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore with oval access door, fixed in repairs, complete all as specified.

PVC (SWR) vent cowl of size 110mm bore, fixed in repairs, complete all as specified & directed.

PVC (SWR) vent cowl of size 75mm bore, fixed in repairs, complete all as specified & directed.

Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed, fixed in repairs, complete all as specified & directed.

Non skid ceramic coloured tiles, 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4 and taking down door shutter and refixing the shutter at same place after laying of tile, complete all as specified & directed.

Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Glazed ceramic coloured tiles of size 300mmx200mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Stainless steel sink with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron bracket, connecting union etc. and overall size 915x460mm with bowl size 410x330x160mm, fixed in repairs, complete all as specified & directed.

Granite (of any type), 18-20mm thick as in floor or on cooking platforms, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing over & including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repairs, complete all as specified & directed.

Low density polyethylene waste pipe, 32mm dia of pressure rating 4 kg/ cm2 with polyethylene union & check nuts, 75cm long suitable for WHB/urinal, fixed in repairs, complete all as specified & directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.

15mm thick rendering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed.

5mm thick rendering in cement mortar 1:4 over 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces using integral water proofing compound, surface finished even and smooth without using extra cement, complete all as specified & directed. Note : Integral water proofing compound shall be measured & paid for seperately under respective items.

5mm thick rendering in cement mortar 1:3 on concrete surfaces of chajjas, upward fascias, ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed.

Supply only integral water proofing compound, complete all as specifed & directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified.

Preparation of new plastered or concrete surfaces of walls, chajjas, facias, parapets etc and applying two coats of cement base paint over a coat of cement primer, complete all as specified & directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified & directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash, complete all as specified & directed.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in padding on roof, for levelling of roof slab, finished even and fair, complete all as specified & directed.

Complete removal of the existing roof treatment of any description viz tarfelt or membrance surface of roof tiles/concrete padding etc including grubbing up of tree roots, removing all the debris to a distance n exc 100m for roof treatment work, preparation of the concrete roof surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as specified & directed :- (a) Applying 1st course of 15mm thick screed bed in cement mortar 1:4 over concrete surfaces. (b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 ltrs including making connections, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) and dismantling of old unserviceable water tank of any description, complete all as specified & directed.

Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 ltrs including making connections, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) and dismantling of old unserviceable water tank of any description, complete all as specified & directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position, exc. 250 & n. exc. 500 ltr, complete all as specified & directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position, exc. 500 & n. exc. 1000 ltr, complete all as specified & directed.

Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed.

Taking up or down steel tubing and connections 20mm bore, complete all as specifed & directed.

Taking up or down steel tubing and connections 25mm bore, complete all as specifed & directed.

Galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Galvanized iron water tubing, medium grade, 25mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified & directed.

PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified & directed.

Stop valves, 15mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Stop valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified & directed.

Brass chromium plated WHB mixer for mixing hot & cold water, single hole, screwed down for iron pipe, bore of pipe 15mm, fixed in repairs, complete all as specified & directed.

Bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.

Angle valves, 15mm bore, fancy type, chromium plated capstan head, cast copper alloy, screwed down, high pressure, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Brass chromium plated shower rose of 125mm size, fancy type with or without swivel joints, fixed in repairs, complete all as specified & directed.

Vitreous china wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, plastic water closet seat, white, closed pattern with flat bottom and cover, mild steel chromium plated or aluminium hinging device, chromium plated jet nozzle with 1500mm long PVC pipe fixed with screws of suitable size including making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified & directed.

Vitreous chinaware squatting pan, 'Orissa Pattern' size 580mm x 440mm with integral foot rests, white, with ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified & directed.

Vitreous china, wash hand basin, flat back, white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper, 32mm dia PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed.

malghotra construction co

JK BUILDERS AND DEVELOPERS

M/S Shiv Enterprises

S R CONSTRUCTIONS

NARESH KUMAR AND COMPANY

KAMAL CONSTRUCTION

Alishan Builders