Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.2 L+₹1.7 L (9.64%)Rejected-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹19.9 L+₹2.3 L (13.2%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹20.5 L+₹3.0 L (17.0%)Rejected-AOC | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹23.6 L+₹6.0 L (34.4%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹25.0 L
EMD Value
₹50,000
Closing Date
26 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
WELCOME MAINTENANCE CERTAIN B R REPAIRS TO MD ACCN OF OFFICERS JCOs ORs AT ZONE G AREA UNDER AGE B R N NO II OF GE NORTH SECUNDERABAD
2023_MES_606268_1
8689
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹50,000
Yes
16 Nov 2023
28 Jun 2023
28 Jul 2023
28 Jun 2023
26 Jul 2023
12 Jul 2023
Amount
Material and labour for preparing the old decorated surfaces of walls up to any height and applying one coat of white wash complete all as specified and as directed.
Material and labour for preparing the old decorated surfaces of ceilings at any height and applying one coat of white wash complete all as specified and as directed.
Material and labour for preparing the old decorated surfaces of walls of any height by washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion of approved colour complete all as specified and as directed
M&L for Preparing old distempered surfaces of ceilings, by washing, rubbing down and stopping and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed.
M&L for Preparing the plastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.
M&L for Preparing old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Preparing old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for Preparation of old weather proof paint by washing, rubbing down and applying one coat of weather proof paint including scaffolding destaging as necessary complete all as specified and as directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger/ Weather Shield Max Exterior Acrylic from ICI Dulux.
M&L for preparing old surfaces of walls and application of putty (any number of coats including smoothening using abrasive paper etc.) and applying two coats of distemper oil emulsion over a coat of chalk whiting primer complete all as specified and as directed.
S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 15mm-142gms) complete all as specified and as directed.
Disconnecting the existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required) for repairs and cleaning etc and hoisting, reconnecting and re-fixing in position duly cleaning with bleaching powder and removing all scale and dirt etc complete all as specified and as directed
All as per item No 11 above, but of capacity exceeding 500 litres but not exceeding 1000 liters capacity complete all as specified and as directed.
M & L for rotational moulded polythylene water storage triple layered tanks 500 ltr capacity (cylindrical type with closed top) hoisted & fixed in position all as specified in SSR Part I Incl dismantling old tanks and removal to store yard complete all as specified and as directed.
All as per Item No: 13 above, but for tanks of 1000 Ltrs capacity complete all as specified and as directed.
All as per Item No: 13 above, but for tanks of 2000 Ltrs capacity complete all as specified and as directed.
Demolition of plain cement concrete (un reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old stone/brick work built in cement mortar complete all as directed.
Taking down shutters of any description area exceeding 1 Sqm but not exceeding 2 Sqm each including re-fixing in same opening after carrying out necessary repairs complete all as specified and as directed.
Supply and fix in repairs 100mm Butt hinges, medium weight, cold rolled mild steel fixed complete all as specified and as directed.
Supply and fixed in repairs 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt with bright not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on blot plate and two on staple plate complete all as specified and as directed.
Supply and fix in repairs 300mm long aluminum alloy, anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.
Supply and fix in repairs 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fixed in repairs 150mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and as directed.
Taking down Aluminium shutters of doors /windows any description area not exceeding 2.5 Sqm each including re-fixing in same opening after carrying out necessary repairs complete all as specified and as directed. Note : Replaced section will be measured under relevant item of schedule.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed.
Supply and fix in repairs 200mm long Mild steel tower bolt, stove enameled black with bright bolt complete all as specified and as directed.
Supply and fix in repairs 150 mm long Mild steel tower bolt, stove enameled black with bright bolt complete all as specified and as directed.
Supply and fix in repairs 150mm size extruded aluminum alloy handles, fabricated type anodized finish complete all as specified and as directed.
Supply and fix in repairs 150mm-size mild steel pressed handle oval type stove enamelled black Handles complete all as specified and as directed.
Supply and fix in repairs 100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F in repairs 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S& F in repair Mild steel chromium plated curtain rod 19 mm dia with fixing brackets, stops, rollers etc., of standard thickness and of any length complete all as specified and as directed.
M and L for Welding in repairs n exc. 2.5cm in length and thickness of metal to be welded n exc. 6 mm complete all as specified and as directed.
Dismantling of stone slabs & tiles of any description of thickness laid dry and pointed in any mortar, in floors, aprons etc., complete all as specified and as directed.
M&L for 25mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, windows-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M & L for 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down etc steel tubing and connections complete all as specified and as directed.
M & L for 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down old steel tubing and connections complete all as specified and as directed.
M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement etc., complete all as specified and as directed.
M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished fair in patches incl taking down existing plastering including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
M & L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 in patches finished fair and even without using extra cement. including taking down existing plastering raking out joints, hacking for key, scrubbing down with water etc., complete all as directed.
M & L for Rendering 5mm thick on concrete surfaces in cement mortar 1:3 in ceiling in patches and finished even and smooth without using extra cement and including taking down existing plastering complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15 mm thick in CM (1:6) including dismantling existing floor tiles and rubbish off the premises complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick as in backing coat in CM(1:4) including dismantling existing floor tiles and rubbish off the premises complete all as specified and as directed.
M&L for light shade Vitrified tiles10 mm thick (Square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in C:M (1:6) including dismantling extg tiles and rubbish off the premises complete all as specified and as directed.
M&L for light shade Vitrified tiles 10 mm thick (Square /rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in CM (1:3) including dismantling extg tiles and rubbish off the premises complete all as specified and as directed.
M & L for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection etc finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick cm (1.3) backing coat including dismantling of existing tiles from dado complete all as specified and as directed.
M&L for Preparing newly plastered surfaces of walls in and applying three coats of white wash to match with the existing surfaces complete all as specified and as directed.
M&L for Preparing newly plastered surfaces of walls in (patchwork) and applying two coats of colour wash over one coat of white wash to match with the existing surfaces complete all as specified and as directed.
M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash to match with the existing surfaces complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame or second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane fixed in repairs including hacking out old broken glass complete all as specified and as directed.
S&F 4.5mm thick sheet glass, ordinary quality and glazing with rubber beading to aluminium windows in squares not exceeding 1.00 Sqm in each pane fixed in repairs including hacking out old broken glass complete all as specified and as directed.
S&F in repairs 0.80mm thick, mild steel plain black sheeting as covering to door shutters and similar work, cut to size, edges beaded if directed, holes punched, including riveting or welded to steel members etc., with plain 40mm lap joints or welded/riveted seams incl bending, turning U, mitred angles stopped ends, outlets etc., as required complete all as specified and as directed.
S&F 110 mm dia UPVC/PVC (SWR) bends, of any radius fixed in repair in place of AC bends complete all as specified and as directed.
All as per item No.54 above, but 75mm bore complete all as specified and as directed.
S & F 110mm dia UPVC/PVC (SWR) vent cowl fixed in place of AC cowl complete all as specified and as directed.
S & F 110mm UPVC (SWR) soil waste, and vent pipe in any length with Rubber Ring joint fixed to wall / laid in floors including demolition old pipes of any description complete all as specified and as directed.
S & F 75mm UPVC (SWR) soil waste, and vent pipe in any length with Rubber Ring joint fixed to wall / laid in floors including demolition old pipes of any description complete all as specified and as directed. .
S & F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed.
S&F in repairs 600 mm long of PTMT towel rail fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
Supply & fix in repairs UPVC/PVC (SWR) branch piece, single (single 'Y' or 'T' etc) equal or unequal 110mm dia with access doors complete all as specified and as directed.
Supply & fix in repairs UPVC/PVC (SWR) branch piece, single (single Y or T etc) equal or unequal 75 mm dia with access doors complete all as specified and as directed.
M&L for 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm including two coats of synthetic enamel paint over primer complete all as specified and as directed.
M&L for 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, se-cured with nails or brads sectional area exceeding 6 Sqcm & but not exceeding 13 Sqcm including two coats of synthetic enamel paint over primer complete all as specified and as directed.
S&F in repairs 6 mm thick no of ply 5 Plywood, grade BWP, type BB fixed with screws to timber frame work including two coats of synthetic enamel paint over primer complete all as specified and as directed.
S&F in repairs 9mm thick no of ply 5 Plywood, grade BWP, type BB fixed with screws to timber frame work including two coats of synthetic enamel paint over primer complete all as specified and as directed.
S&F in repairs 12 mm thick no of ply 7 Plywood, grade BWP, type BB fixed with screws to timber frame work including two coats of synthetic enamel paint over primer complete all as specified and as directed.
S&F 3mm thick figured glass, pin headed and glazing with oil putty and glazing clips in metal frame second class hard wood beading in wooden frames in squares not exceeding 0.5 Sqm in each pane fixed in repairs including hacking out broken glass complete all as specified and as directed.
M & L for Pressed steel peg stays suitable for steel windows with side hung shutters as per existing pattern fixed in repairs complete all as specified and as directed.
M & L for Pressed steel handles right /left suitable for steel windows with side hung shutters as per existing pattern fixed in repairs complete all as specified and as directed.
M & L for Pressed steel peg stays Telescopic pattern suitable for steel windows with side hung shutters as per existing pattern fixed in repairs complete all as specified and as directed.
S & F aluminium (die cast body)door clooser hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and as directed.
S&F in repairs brass 4 levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed.
S & F 10 Ltrs capacity PVC valveless flushing cistern , low level, white, with inlet ball valve, float and handle inc brackets, including flush pipe of PVC 32 mm dia for low level cistern, in repairs complete all as specified and as directed.
S&F SS grating for Nahani traps 100 mm dia of male/ female pattern with or without hole for waste pipe fixed in repairs complete all as specified and as directed.
S&F for PVC flush pipe (low level band) 32 mm dia for low level flush tank (High density) of standard make suitable for EWC fixed in repairs complete all as specified and as directed.
M & L for Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or Galvanised wire staples fixed in in repairs complete all as specified and as directed.
M & L for Low density waste pipe 40 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 90 cm long suitable steel sink waste complete fixed in repairs complete all as specified and as directed.
M & L for Low density waste pipe 32 mm dia for working pressure rating 4 Kg/Sqcm with polyethylene union and check nuts 75 cm long suitable for WHB/URINAL complete fixed in repairs complete all as specified and as directed.
M & L for High density polyethylene pipes (HDPE) 40 mm dia for working pressure rating 6 Kg/Sqcm including necessary fittings complete fixed in repairs complete all as specified and as directed.
S&F in repairs 15mm bore, 45 cm long PTMT PVC connecting pipe fitted with brass unions to connect iron pipe to PVC pipe on both ends and fixed complete all as specified and as directed.
S&F in repairs Stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions complete all as specified and as directed.
S&F in repairs Stops valves, cast copper alloy, chromium plated fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.
S&F in repairs Pillar taps, cast copper ally, with capstan heads, chromium plated, fancy type, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm dia bore iron pipe complete all as specified and as directed.
S&F in repairs Brass chromium plated, mixing valve for mixing hot and cold water, screwed down, screwed for 15 mm bore iron pipe fixed complete all as specified and as directed.
S&F in repairs Bib taps, cast copper alloy chromium plated fancy type with capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as specified and as directed.
S&F in repairs Bib taps cast copper alloy with crutch handle, screwed down and screwed for 15 mm bore iron pipe fixed complete all as specified and as directed.
Taking out existing unserviceable water closet, pedestal pattern of any size and supply & fix vitreous China wash down water closed pan (pedestal Pattern) white including fixing bolts, including making good to floor to match with adjoining surfaces complete all as specified and as directed.
Taking out existing unserviceable water closet, squatting pan of any size and supply & fix vitreous China squatting pan ‘Orissa’ pattern, size 580 X 440 mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, PCC 1:3:6 type C2 bedding etc., complete including making good to floor to match with adjoining surfaces complete all as specified and as directed.
M&L for vitreous china wash hand basin, white, flat back size 550x 400 mm fixed in repairs including waste pipe, (hope of bore 32mm) waste coupling brackets, etc., fixed in repairs complete all as specified and as directed. Make: HINDWARE/PARRYWARE/CERA
S&F in repairs Vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and out going pipes etc., complete all as specified and as directed.
M & L for 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, fixed in repairs complete all as specified and as directed.
S&F for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed in repairs complete all as specified and as directed.
S&F Swivel shower of PTMT of any colour for fixing with 15 mm pipe fixed in repairs (Min weight 40 gms) complete fixed in repairs complete all as specified and as directed.
M & L for 125 mm dia brass chromium plated shower rose with swivel joints fixed in repairs complete all as specified and as directed.
S&F 32 mm dia waste coupling of PTMT (Hall or full thread) fixed in repairs (Min weight 45 gms) complete all as specified and as directed.
S&F sink waste coupling fixed in repairs complete all as specified and as directed.
S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
M&L for three coats of rain coat of 2.00 mm thick on concrete surfaces of any description by using Dr fixit grey colour including preparation of surfaces to receive the treatment all as per the manufacturers instructions complete all as specified and as directed.
M&L for filling of cracks of size up to 15 mm wide and 10 mm deep on concrete surfaces of any description by using Dr fixit crack seal including preparation of surfaces to receive the treatment all as per the manufacturers instructions complete all as specified and as directed.
Dismantling of AC corrugated as semi corrugated sheet in roof coverings complete all as specified and as directed.
M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling of ceiling boards (fibre pulp, insulation etc) on insulation boards/slabs/blankets, any thickness, including corner fillets complete all as specified and as directed.
S & F 4mm thick non asbestos fibre cement buildings boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling with screws complete all as specified and as directed.
S& F in repairs chromium plated sink cock complete all as specified and as directed. Make: Code No 63121A1 of Parryware or equivalent in HINDUSTAN/CERA/PRAYAG
S& F in repairs cromium plated two way tap complete all as specified and as directed. Make: Code No 61867A1 of Parryware or equivalent in HINDUSTAN/CERA/PRAYAG
S& F in repairs chromium plated long body bib cock with wall flange tap complete all as specified and as directed. Make: Code No 61806A1 Parryware or equivalent in HINDUSTAN/CERA/PRAYAG
S& F in repairs chromium plated angle valve complete all as specified and as directed. Make: Code No 61453A1 of Parryware or equivalent in HINDUSTAN/CERA/PRAYAG
S& F in repairs chromium plated single flow over head shower with arm and wall flange complete all as specified and as directed. Make: Code No T9927A1 of Parryware or equivalent in HINDUSTAN/CERA/PRAYAG
S& F in repairs of brass chromium plated, health faucet with health faucet tube of 1.5 metre long and stand etc screwed for 15mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: ALD-CHR-583 & SHA-571 of JAQUAR or equivalent in HINDWARE/PARRYWARE/CERA as approved
S& F in repairs spindles suitable for chromium plated concealed stop cock, angle cock, two way taps, long body taps, sink cocks & mixture valves of any pattern complete all as specified and as directed.
S&F in repairs sinks with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixed complete all as specified and as directed.
S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
Roughening the surfaces of old concrete roof/Chajjas by picking, sweeping, clean and washing down with water to remove dust etc., and applying neat cement slurry @3.00Kg / Sqm in Chajjas and roof projections complete all as specified and as directed.
M&L for rendering plastering in CM 1:4, 10 mm thick on concrete surfaces, adding with water proofing powder as per the manufacturers instructions, finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral Water Proofing Compound (WPC) complete all as specified and as directed.
S.R.M.K Enterprises
VACON INFRASTRUCTURES
RAM CHARAN CONSTRUCTIONS
abhilasha constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .