SPECIAL REPAIR TO DRAINAGE SYSTEM AND CERTAIN REVENUE WORKS OF B/R NATURE AT JANGLOTE UNDER GE BASOLI

Amount

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m in depth and getting out in any type of soil, complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Material and labour for Walling of Random rubble stone masonary brought to course well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

All as per item No 05 above but except stone

Material and labour for Brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 06 above but except brick

Material and labour for Brick work with old size sub class "B" bricks straight or curved on plan exc. 6m mean radius as in half thick brick wall built in cement mortar 1:4 complete all as specified and directed.

Extra over stone walling, built with sand stone for hammer dressing of face stone and dressing of face bed with joint with maximum depression 40mm on face from straight edge held against the dressed surface complete all as specified and directed.

M&L precast Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bond stones etc including necessary form work.and set in cement and sand mortar 1:6, complete all as specified and directed

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in drains or surface channels finished even and fair including demolition of unreinforced concrete in ground floor or paving complete, all as specified and directed.

Extra for fair finished drain or channel 30cm inner girth in cement concrete using extra cement incluing forms, moulds, mitered/stopped ends etc complete all as specified and directed.

Demolition of brick work or stone boulder masonary built in cement mortar incl all quoins, arches, pillasters etc, complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick wall or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement including three coats of white wash complete all as specified and directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of primer including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Rendering 5 mm thick in cement mortar 1:3 and finished even and smooth without using extra cement and preparation of new plastered surfaces and applying three coats of white wash on ceiling including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for Flush pointing in cement mortar 1:3 to random rubble stone masonary complete all as specified and directed.

Material and labour for M-20 (Nominal mix) as in column, pillar, pier, post etc (using 20 mm graded crushed stone aggregate) complete all as specified and directed .

Form work to pillar, post, columnn etc finished as ruf finish surface complete all as specified and directed.

Material and Labour for TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Material and Labour for TMT mild steelbars 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix for steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings except grills ,complete all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

Material and Labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete, conforming to Fe 410-W (Gde E-250) quality A, including dismantling of old gates complete all as specified and directed.

Material and labour for 1.6mm thick Mild steel , plain black sheet in wall cladding, steel gates and similar work, cut of size, holes punched, including round headed screws, clout, nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed

Providing, cement concrete Type B-0 1:2:4 (12.50 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing including demolition of unreinforced concrete complete all as specified and directed .

Demolition of cement concrete (unreinforced) of any discription and in any position not otherwise specially provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) of any discription and in any position not otherwise specially provided for complete all as specified and directed.

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:4 all as specified and directed incl necessary form work. including demolition of Reinforced cement concrete of any description ( Note:-: Steel reinforcement shall be measured and paid for separately under respective items.)

Dismantling of wrought iron or mild steel work of any discription not otherwise described for complete all as specified and directed.

Siupply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Demolition of stone slab and tiles of any descriptions or thickness in floors, aprons rtc laid and jointed in any mortar complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar 1:4 for backing coat of tiles Complete all as specified and directed.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete, all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Supply and fix for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed .

Supply and fix for Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet 10mm thick to be fitted in and sealed the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing as per SSR complete all as specified and directed.

Supply and fix for mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed.

Supply and fix for Extruded aluminium alloy handles fabricated type anodised and fixed, 150 mm size complete, all as specified and directed.

Supply and fix for Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt,complete all as specified and directed.

Supply and fix for Sheet glass 4.00 mm thick frosted glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane. complete all as specified and directed.

Supply and fix for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

Supply and fixing for Mild steel galvanised wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Supply and fix wash down water closet JUNIOR (Pedestal pattern) one piece including flushing cistern and Flush pipe and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin counter type flat back of size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed.

Supply and fix 15mm bore chromium plated Jet spray for pedestal pattern WC complete all as specified and directed.

Supply and fix Vitreous china bowl urinal flat back of size 465x365x265mm minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe of Hindware or Cera mark complete all as specified and directed..

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Supply and fix for steel water tubing galvenised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Supply and fix in repairs15 mm bore dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fix for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve/Angle Valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix 15 mm dia bore Bib taps , fancy type, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. complete all as specified and directed.

Supply and fix in repair Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

JAI DURGA CONSTRUCTION CO

Ms International Engineers

Ashoka Engineers

Standard engineers

AGGARWAL ASSOCIATES

M/S ONKAR SINGH PATHANIA

G.M. ENGINEERING SERVICES