Providing and Fitting of components to 100 KVA and 63 KVA voltage stabilizer installed at Tubewell No 19 Police Line and 14 Boria respectively under 8448 GIA

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer PHE MECHANICAL DIVISION SOUTH JAMMU

Name of Work: Providing and Fitting of components to 100 KVA and 63 KVA voltage stabilizer installed at Tubewell No 19 Police Line and 14 Boria respectively under 8448 GIA

Contract No: e-NIT No.PHEJ/MS/113 of 2025-26 Dated 13-02-2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE Inclusive of all Taxes In Figures To be entered by the Bidder Rs. P SGST in Rs Rs. P CGST in Rs Rs. P Rebate On Old Parts In Rs Rs. P Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Providing and Fitting of components to 100 KVA Voltage Stabilizer of Tubewell 19 Police Line by way of disconnecting input and output electric supply connections of the Voltage Stabilizer and making connections of main switch directly with the LT Control Panel. Dragging the voltage stabilizer from its position manually/manpower and sent to workshop for repairs. Dismantling of top cover and extraction of the transformer assembly from the oil tank with the help of chain pulley block. Complete replacement of 2 no main copper coil by providing and fitting of new coils made out of superior quality copper wire as per the original design and reconditioning of 1 no coils and varnishing of all the three coil sets. Dismantling and extraction of rotary switch assemblies, Providing and Fitting of 2 No. rotary switch assemblies. The job further involves draining out all the transformer oil from the oil tank, cleaning the oil tank, dehydrating the Transformer-Oil by heating with the heating coils. Again refilling the same T- Oil after dehydration, filtration and adding fresh T-Oil 70 litres to top up the level. Assembling the stabilizer transformer and lowering in the oil tank with the help of chain pulley block. Repairs to internal control wiring of the panel of the stabilizer, the job also includes providing and replacement of damaged voltmeters, selector switches and RYB indicators. Fitting the panel board and top cover. Shifting back the stabilizer to site and positioning inside the pump room manually. Making connections by providing and fitting new thimbles after cutting heated ends and testing on full load. The Job inclusive rebate on account of old copper scrap. Complete job includes the cost of material and labour charges 0.000 Job Excess(+) Full Conversion INR

2 Providing and Fitting of components to 63 KVA Voltage Stabilizer of Tubewell 14 Boria by way of disconnecting input and output electric supply connections of the Voltage Stabilizer and making connections of main switch directly with the LT Control Panel. Dragging the voltage stabilizer from its position manually/manpower and sent to workshop for repairs. Dismantling of top cover and extraction of the transformer assembly from the oil tank with the help of chain pulley block. Complete replacement of 1 no main copper coil by providing and fitting of new coils made out of superior quality copper wire as per the original design and reconditioning of 2 no coils and varnishing of all the three coil sets. Dismantling and extraction of rotary switch assemblies, Providing and Fitting of 1 No. rotary switch assemblies. The job further involves draining out all the transformer oil from the oil tank, cleaning the oil tank, dehydrating the Transformer-Oil by heating with the heating coils. Again refilling the same T- Oil after dehydration, filtration and adding fresh T-Oil 45 litres to top up the level. Assembling the stabilizer transformer and lowering in the oil tank with the help of chain pulley block. Repairs to internal control wiring of the panel of the stabilizer, the job also includes providing and replacement of damaged voltmeters, selector switches and RYB indicators. Providing and fitting of MCCB 125 Amp of reputed make. Fitting the panel board and top cover. Shifting back the stabilizer to site and positioning inside the pump room manually. Making connections by providing and fitting new thimbles after cutting heated ends and testing on full load. The Job inclusive rebate on account of old copper scrap. Complete job includes the cost of material and labour charges 0.000 Job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Upkeepment of 6000 GPH x 80 mtr x 12.5 HP Submersible Pumpset of T/well Sec-14 Nanak Nagar by way of disconnection of power supply and extraction of Submersible Pumpset using skilled labour with allied tools and tackles. Dismantling and shifting of pumpset to workshop by Mech. Transport. Repairing by Providing, fabrication and fitting of S.S pump shaft as per sample, 8no. impellers, 6 no. pump bodies, 8no. neck rings, 8no. body bushes, SS coupling pulley and nut bolts and assembling of punp atworkshop. The Job includes dismantling and repairing of 12.5 HP Submersible motor by providing, fabrication and fitting of thrust pad set and rotor bushes. Assembling of the motor, coupling with pump and testing the pumpset in the test pit then shifting of pumpset to the site of installation. Making electrical connections of motor with sub cable by making leak proof joint and lowering of pump set along with providing and replacing rubber gaskets and nut bolts. Making connections of submersible cable with panel and then testing on full load Select

Please Enable Macros to View BoQ information