PROVN OF WASH ROOM NEAR DRILL SQUARE AT OTA UNDER GE STM CHENNAI

Surface excavation n.exc 30 cm deep but averaging 15cm deep and getting out in hard dense soil complete all as specified and as directed.

Excavating in trenches, n.exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sqm on plan and n exc 1.5m in depth and getting out in hard dense soil complete all as specified and as directed.

Cement concrete 1:4:8 type D2 in foundations, filling and mass concrete complete all as specified and as directed.

M & L for Reinforced cement concrete type B-1, 1:2:4, using 20mm graded stone aggregate as in footings, plinth beams and mass concrete complete all as specified and as directed.

M & L for Reinforced cement concrete type B-1, 1:2:4, using 20mm graded stone aggregate as in Columns., pillars complete all as specified and as directed.

M & L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in lintels upto 1.5m clear and other similar bands, including form work complete all as specified and as directed.

M & L for Reinforced cement concrete type B-1, 1:2:4, using 20mm graded stone aggregate as in floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc., complete all as specified and as directed.

M & L Reinforced cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in slabs supported on walls, beams etc., complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, plinth beams for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, columns for rough finished concrete surfaces complete all as specified and as directed.

Form work to sides and soffit of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work incl sides of slab, n exc 200mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

S & F TMT steel bars 10mm dia and over, cut to length bent to shape required as in reinforce ment to lintels complete all as specified and as directed.

All as per item No.13 here-in-before but 6mm to 8mm dia complete all as specified and as directed.

All as per item No 13 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups complete all as specified and as directed.

M & L for old size Brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in CM 1:6 complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Removal of surplus spoil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Earth filling under floors including Spreading and levelling in layers n.exc 25cm thick including well ramming including watering as required complete all as specified and as directed.

M & L Hardcore (stone) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base floor complete all as specified and as directed.

M & L for 25mm thick cement concrete, 1:2:4, type B-1 using 20mm graded stone aggregate as in under layer to tile finishes complete all as specified and as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick wlls built in CM 1:4 all as specified.

M & L vitrified joint free tiles 10mm thick light shade area of each tile exc 0.42sqm but not exc 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed bed 15 mm thick in CM 1:4 complete all as specified and as directed.

M & L for glazed coloured joint free tiles in vertical surfaces, 1200mm x 600mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement including cement mortar 10mm thick in CM 1:3 complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment or mat over and including cement screed 15 mm thick in CM 1:4 complete all as specified and as directed. Note:- colour other than black or brown and as speciffied and as approved / directed by EIC

M & L for Rendering 10mm thick in CM 1:6 on wall or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth complete all as specified and as directed.

M & L for Rendering 10mm thick in CM 1:4 as in water proofing treatment and finished even and smooth (without using extra cement) as in roof treatment complete all as specified and as directed.

M & L for water proofing treatment with APP based polymeric membrane modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures:- IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note:- The work shall be carried out be authorised applicators of manufactures. Four course of roof treatment consist of as under:- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 ltr /sqm (ii) Laying of APP based membrane as specified thickness and weight (iii) Applying one coat of Bitumen grade 85/25 @ 1.2 kg/Sqm (iv) Applying two coats aluminium paints @ 100ml/sqm

Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer over 3mm thick wall care putty complete all as specified and as directed.

Preparation of new ceiling surfaces including necessary scaffolding and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of new plastered wall surfaces and applying two or more coats with Acrylic smooth exterior paint of required shade applied @ 1.67 ltr/10sqm over and incl priming coat of exterior primer applied @ 2.20 kg / 10 sqm

S & F Powder coated anodised aluminium frame / shutters for ventilator, doors, Partitions with one or more rebates including jointing cleat for fixing etc., complete all as specified and as directed.

S & F 4mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and fixed to aluminum frames using rubber packing complete all as specified and as directed.

Supply only integral water proofing liquid

M & L for 75mm thick cement concrete 1:3:6 type B-1 (using 20mm graded stone aggregate) as in plinth protection & paving finished even and smooth without using extra cement complete all as specified and as directed.

Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white includidng PVC, syphonic action type, flushing cistern, low level, white, 10 lirs, with inlet ball valve, float, handle and flush pipe and brackets including 32 mm dia flush pipe all as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete. Make :Parry ware Cat No .T9937A1 or equivalent.

S&F Vitreous China oval shaped wash basin counter type, white, size 550 x 400mm embedded on marble platforms including cutting for and pinning in ends of brackets or erecting stand brackets, 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms /40mm-60 gms & waste pipe including taking down of old wash basin

S&F Self-closing pillar taps 15 mm bore, cast copper alloy, chro-mium plated, fancy type, screwed for iron pipe all as specified.

S&F vitreous china urinal, full stall type, white excl flushing cistern, flush pipe and waste pipe but incl brackets, spreader fixed complete.

S&F Angle cock 15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S &F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws 566.39

S & F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S & F PVC connection 15 mm size with PTMT nuts of length 450mm.

S & F PVC (SWR) floor trap with grating including jointing to solvent cement wast pipe 75mm dia.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor, 110 mm bore complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed on walls, 110 mm bore complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor, 75mm bore complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed on walls, 75mm bore complete all as specified and as directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm bore pipe with access door complete all as specified and as directed.

S & F PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe with access door complete all as specified and as directed.

S & F PVC (SWR) bend 110 mm bore

S & F PVC (SWR) bend 75 mm bore

S & F PVC (SWR) vent cowl 110 mm

S & F PVC (SWR) Gully trap 125 / 110mm setting and jointing with solvent cement.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ ceiling/ floors complete all as specified and as directed.

All as per item No 61 here-in-before but of 25 mm outer dia CPVC pipes

All as per item No.61 here-in-before but of 50 mm outer dia CPVC pipes

S & F rotationals moulded, tripple layered, polythylene water storage tanks of capacty 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S & F of 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S & F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 75 mm/110 mm complete all as specified and as directed.

M & L for 150mm dia Reinforced concrete pipes NP3, laid and jointed complete with collars complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C2 bed to 150mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, internal dia of pipe 150mm complete all as specified and as directed.

S & F CPVC 50mm dia brass elbow

S & F CPVC 25mm dia brass elbow

S & F CPVC 20mm dia brass elbow

S & F CPVC 50mm dia brass Tee

S & F CPVC 25mm dia brass Tee

S & F CPVC 20mm dia brass Tee

S & F CPVC 50mm dia Male brass threded adaptor (FTA/FBTA)

S & F CPVC 25mm dia Male brass threded adaptor (FTA/FBTA)

S & F CPVC 50mm dia brass Union

S & F CPVC 25mm dia brass Union

S & F CPVC 20mm dia brass Union

M & L for providing 50mm thick sand cushion under paver block

M & L for machine pressed precast concrete interlocking paver block any shape and size, M-35 grade, with grey cement and pigment, 60mm thick confirming to IS 15658 - 2006

S&F Solid PVC door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification & drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. ( i)Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii)PCC strip of section 5*5mm will have to be created at bottom incl. smooth finish in each door opening.

S & F Particle board core Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F Butt hinges 100 mm, stainless steel hinges fixed with stainless steel screw with frame

S&F Alumininum anodised barrel tower bolts of extruded section 150 mm size

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long

Material and Labour for Point wiring complete with 1.5 sqmm FRLSH single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10Cm girth complete all as specified and as directed for the following:-

(a) One light point controlled by one switch.

(b) One Exhaust Fan controlled by One Switch

(c) One 3 pin 5 amps switch socket on independent board.

(d) One 3 pin 5 amps switch socket on same board along with other switches.

All as per item No.90 here in before but with 4 sqmm copper conductor cable with 2.5 sqmm FRLSH PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board complete all as specified and as directed.

S & F Wall mounted LED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver complete all as specified and as directed.

S & F Wall mounted LED batten Extruded aluminium housing provided efficient heat disipation with polycarbonate diffuser with integrated electronic driver high efficacy.short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed.

Supply, Installation, testing and commissioning of Surface mounted LED luminaries with Mid flux LED using efficient optics , System lumen efficacy > 80Lumen/Watt , System Luminous flux of >=3200 lumens, System Wattage <=42W with 50,000 hours burning life. Color rendering index > 70 and Color temperature 5000K/6500K. CRCA housing with high efficiency opal diffuser. Luminaries sealed from bottom. Inbuilt gear . Zero maintenance, Zero mercury. Driver Surge protection > 1.5kV. Electronic In-Built PF > 0.9 , THD < 10% , IEC Compliant for Safety , Performance & EMI. The size shall be of 2'x2'.

S & F Endura PEARL 30W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type 30W LED 6000K complete all as specified and as directed.

S & F MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

S & F MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity complete all as specified and as directed.

S & F MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity complete all as specified and as directed.

S & F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals complete all as specified and as directed.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and as directed.

S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and as directed.

S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module complete all as specified and as directed.

S & F Exhaust Fan 300mm Metal Body Heavy Duty complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25cm each complete all as specified and as directed.

Supplying and laying burnt brick "B" class standard size for protection of cable complete all as specified and as directed.

Fine Sieved excavated dry soil (ridgled & Earth) laid to the required width of trench at bottom and top of cable as cushioning complete all as specified and as directed.

Supply & Laying cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of following sizes all as specified and as directed.

2 core 10 Sqmm Note :- i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

Supply and Laying of GI Tubing of galvanized medium grade of 40mm including all fittings such as bend, elbow, tee and union in trenches/ on floors/ wall/ ceiling etc., complete all as specified and as directed.

Material and Labour for Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed.