SPECIAL REPAIR TO ROADS FURNITURE AND FOOTPATH OF OFFICE COMPLEX AND MARRIED ACCOMMODATION AT CQA (A) KIRKEE PUNE

Amount

M & L for Repairs to pot holes any depth n,exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads etc, cutting around edges atleast 25mm in depth, making good by applying tack coat @ 5Kg per 10Sqm of paving bitumen (VG-30), putting in premix bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm of paving bitumen, blinded with o.09 cum of stone chippings 6.3mm size and again well rammed(including supply of premixed macadam binder and chippings) depth of pot holes exceeding 30mm complete all as specified & directed by Engr-in-charges.

M&L for Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and depth exc 50mm and n.exc 100mm complete all as specified & directed by Engr-in-charges.

M&L for 7.5 cm thick (compacted thickness) WBM, with Granite, trap or basalt stone coarse aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread and rolled and consolidated to gradient and camber required including rolling by using mechanical power road roller of 8 to 12 tonne capacitycomplete all as specified & directed by Engr-in-charges.

All as per Item No 3 above but except material (material used to be obtained from scarifying).

M &L Preparing unsurfaced WBM surface by brushing with wire brush for removing caked mud etc., sweeping with brooms, and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and for applying evenly a tack coat with bituminous emulsion RS-1 @ 10 kg per 10 Sqm with sprayer over existing surface etc complete all as specified & directed by Engr-in-charges.

M & L Premix bituminous macadam with 4% binder content using paving bitumen) by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less). Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) In case variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted with price adjustment.

M&L for preparation of existing black top surfaces by brushing with wire brushes and removing caked mud etc sweeping with broom and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying evenly a tack coat with bituminous emulsion RS-1 @ 5 kg per 10 Sqm with sprayer over bituminous macadam etc complete all as specified and directed by Engr-in-charge.

M & L for applying evenly a tack coat with bituminous emulsion RS-1 @ 3 kg per 10 Sqm with sprayer over bituminous macadam etc complete all as specified and directed by Engr-in-charge.

M&L for bituminous premixed asphaltic semi-dense concrete using paving bitumen (VG-30 grade), 30mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete complete all as specified and directed by Engr-in-charge. Note :- The contractor quoted the rate shall be deemed to include the follwing elements:- (i) The contractor shall get the mix design done through Govt approved lab and shall get the same got approved from GE before incorporating in the work. (ii) Contractor shall submit the authenticated weigh batch receipt for every load of materials brought at site. (iii) In case variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted with price adjustment.

M&L Moorum/Red bajri, spread, rolled and consilidated to required gradient and camber (Spread thickness 100mm (average) all as specified and directed.

M&L for preparation of New/existing black bituminous road/concrete surface and painting lines dashes (continuous/interrupted), arrows,letters etc on road 2.5 + 0.5mm thick and n. exc 10cm wide with one coat of hot applied white /golden/yellow auto retro-reflective thermoplastic road marking paint with reflectory glass beads on bituminous road all as specified in clause 803.40 of MOSRT&H specification over a coat of self primer using special applicator machine as per IRC pattern including cleaning of road surface free from dust & moisture and putting in duly mixed with 8% mica sign special applicatore machine complete all as specified and as directed Make of paint : CMS Bombay / Shivalik Prime-Chandigarh / Ritco / Meerut / SN Industries-Delhi) as approved by GE

S&F in repairs Cata-stud (Cats eye) made out of ABS Plastic with beams two sides fixed with High Intensity grade Retro-Reflectivebulb in Red/Yellow colour having fixing provision of nails two Nos and complete in all respect.

S & F in repairs solar stud made out of Aluminium housing and precast construction solar powered monocrystal solar panel 2W 120mA type of battery NI-CD 1.2V 2500 m AH & flash rate 2 Hz or 70 Hz view distance over 300 mtr fitted with 2 Hz EL -805-3 pieces eacg side on 2 ends total 6 pieces LEDs flashing up to 12 hours of light at Night and solar batter automatically charge in day /sun light duly fixed with cement and hardner. 125 x 125 x 25 mm (60 mm shank) in Red / Yellow colours

S&F in repairs road safety Ultramind Convex Mirror ( Road Safety Mirror ) 60cm dia fixed in PCC foundation 1:3:6 of size 30x30x45cm complelete all as directed.

S & F in repairs Retro-reflective sign board of size 1.20mx0.90m made out of ACP sheet 3mm thick and fixed on SS 304 series hollow tubular of 40mm dia. The board shall be sheeted with reflective tape of blue/green colour, letter shall be written both sides in white colour writing of approved colour (Upto 60 letters on each side of board) of reqd shape and size as approved by GE. The sign board supported on 02 Nos post of 60mm dia SS pipe 304 series 4 Mtr long duly welded or fixed on SS nut bolts of required size as approved by GE. SS pipe fixed to the ground with 02 Nos 50X50X6mm size 60CM long MS angle iron welded to the bottom of SS pole including necessary excavation, returning filling and SS poles with sign board to be fixed with cement concrete (1:2:4) type B-1 complete all as specified and as directed.

S&F in repairs plastic road hump / speed breakers containing each piece of size 25x35x5 cm, made of high grade PVC material, weather proof having colour black and yellow fixed with four fixing bolts to anchor the hump/speed breakers on the old/existing road.

S & F in repairs precast kerb of size 30x10x30cm,(in Cement concrete 1:2:4 Type B1) fixed over 75 mm thick cement concrete base of 1:3:6 type C2 (Incl surface excavation, if required) and rest of surfaces & joints filled with cement mortar 1:6 & apply 2 coat of synthetic enamel paint (Approved colour/design) over a coat of primer completed all as specified and direceted.

Demolition of cement concrete unreinforced of any description and in any position

M&L for 100mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) Spike roiling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base of floor, mass concrete finished even and fair all as specified and as directed

M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 all as specified and as directed

M&L Reinforced concrete pipes, class NP3, laid and jointed complete with collars , dia 100 mm

M&L Cement concrete 1:2:4 type B0 12.5mm graded aggregate, in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for as in Item 04028, of SSR Part-I of 2020 water troughs and the like including weathering, slightly rounded for chamfered angles and throating, incl demolition complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor, mass concrete finished even and fair all as specified and as directed

M&L for 25mm thick crushed stone dust/sand filling under floors or in foundations including watering and consolidation complete all as directed.

M&L for 80mm thick machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement no pigment confirming to IS 15658-2006 complete all as directed.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED

MOHANLAL MATHRANI CONS. PVT. LTD.

Sunshine Ventures