C/O Garage POL Store Electric Substation Pump Room Generator Shed at BOP Shivrampur of 183 Bn Now 137 Bn BSF

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. (GROUP-B)

Wiring for circuit/ submain wiring alongwith earth wire the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required. (2.1) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm

2 x 4 sq. mm + 1 x 4 sq. mm

2 x 6 sq. mm + 1 x 6 sq. mm

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover infront of including providing and fixing 3 pin 5/6 amp socket outlet and 5/6 amp piano type switch, connection, painting etc .as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a) 200 mm X 300 mm X 60 mm deep (For loose wire box)

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin 5 amps Ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) (10.1) 6 way , Double door

12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (11.1) Single pole

Double pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing, laying and fixing 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. (22.1) 3.5 X 35 sq. mm (32 mm)

2 X 16 sq. mm (22 mm)

Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade ISI marked of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (Havell's or it's equivalent to KEI/HPL/Polycab) (23.1) 3.5 X 35 sq. mm size

2 X 16 sq. mm size

Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of following size on wall surface as required. (Havell's or it's equivalent to KEI/HPL/Polycab) (24.1) 3.5 X 35 sq. mm size (clamped with 1mm thick saddle)

2 X 16 sq. mm size (clamped with 1mm thick saddle)

Supply and fixing sheet steel enclosure 32 amp, 415 Volt, 50 Hz rating 4 pole bus bar chamber directly on surface/ recess of existing wall including connections etc. complete as required. (Cat. No. 641 of MEX make or tis equivalent to Havells/HPL/Standard/Benlo make)

Supply, installation, testing and commissioning of 20 watt LED tube fittings prewired for LED tube, complete with all accessories and LED tube directly on ceiling/ wall including connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Photon Ultra LED Tubelight Cat. No. LHLDCLXNUL8X020 Havells or Philips/CG/Bajaj make)

Supply, installation, testing and commissioning of 1200 mm ceiling fan suitable for operation on 230 Volt, 50 Hz including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (USHA Model Swift/Supra or it's equivalent to Havells/Khaitan/Bajaj make)

Supply and installation 450 mm exhaust fan of double ball bearing heavy duty motor with louvers shutters complete with frame in the existing opening, including, making good the damage, connection, testing, commissioning etc. as required. (USHA Model No. SPH Turbo HDEF, 900 RPM or Havells/Khaitan make)

Supply and fixing of 400 mm sweep size wall fan suitable for operation on 230 Volt, 50 Hz including connection, testing etc. complete as required. (Model No. Striker Hi speed, USHA make or it's equivalent to Havells/Khaitan/Bajaj make)

Supply and fixing of 12 watt white light LED surface mounted downlight with integrated electronic driver in ceiling complete with all accessories including connections etc. as required. (Comet ROUND Cat. No. LHEAAVP7IL1W012 Havells make or it's equivalent to Bajaj/Philips/CG make)

Supply and fixing of 7 watt LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink etc. as required. (Havells or Philips/Bajaj/CG make)

Providing and fixing 60 watt LED street light luminaire IP66 Protection, heat resistant toughened glass with frame, pressure dia cast aluminium housing, better optics for uniform distribution with the help of 1.5 mtr long 40 mm dia GI pipe B class suitably bent to the require shape with clamp, nuts and bolts including connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Endura Pearl Plus Cat. No. ENDURAPEARLPLUSSL60WLED757SASYTOPC Havells make or its equivalent to Philips/CG/Bajaj make)

Fabrication, supplying, installation, testing and commissioning of outdoor type electrical feeder pillar of size 1200 mm x 600 mm x 500 mm deep fabricated out of 2.0 mm CRCA sheet with intermediate membes of same material and guage as required. The box should be supported by 500 mm long legs and frame made by 50 mm x 50 mm x 6 mm thick MS angle iron at the base and almirah type single leaf hinged door with locking arrangement, detachable gland plate made of 3 mm thick MS sheet at the bottom, water drip proofing arrangement at the top, air ventilation grooves at sides dust and vermin proof design, earthing studs, 100 Amp 4 Nos. copper strip bus bar having base connector insulation, 100 Amp TPN switch disconnector fuse unit with HRC fuses in sheet steel enclosure, 63 Amp 5 Nos. DP Isolator output inculding inter-connection with single core copper conductor cable, duly painted with power coated paint etc. as required. (CPRI approved)

POLYNOVA EQUIPMENTS CO