REPAIR TO FLOORING, WALL PANELLING, KITCHEN CUB BOARDS, WARD-ROBE, FALSE CEILING, PLASTERING, PLINTH PROTECTION, CHAJJAS, JOINERY PLUBING, SANITARY FITTING RAIN WATER PIPES AND OTHER ALLIED WKS IN MD AND OTM ACCN OF AOR OF AGE B/R-IV UNDER GE (AWC) M

Amount

Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable Material to store. Complete all as specified and directed.

M&L non skid ceramic coloured tiles 400x400x7 to 8 mm thick (square or rectangular ) including 15 mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Ceramic tiles 600x600x8 to 9 mm thick, light coloured as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M & L for Vitrified Ceramic tiles 600x1200x10 mm thick (square/ rectangular) polished, in floors etc.including 15mm thick cement mortar screed bed or bedding layer and 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for colour printed glazed ceramic tiles (300x 450mm / 300x600 6mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings not exc 15cm thickness (Below or above Ground level) complete all as directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completeall as specified and as directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, laid in floors or trenches complete all as specified and directed.

M&L for morum filling/redbajri filling under floors or in foundation including watering &consoldation laid in layers n.exc 15 cm thick spread levelled and well rammed etc. Complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in Sub-base to floor finishes. Complete all as specified and directed.

Material and labour Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; The paver block should conforming to IS 15658 : 2006 and the minimum average compressive strengh 350 MPA. Complete all as specified and directed.

Material and labour Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; The paver block should conforming to IS 15658 : 2006 and the minimum average compressive strengh >350 MPA. Complete all as specified and directed.

M & L for chequered cement concrete tiles 40cm x 40cm x 25 to 30mm thick (Glosy finished) with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specified and directed.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed.

M & L for providing machine cut kota stone slab mirror finished flooring 20-25mm thick over cement screed bed or bedding layer laid and jointed as in floor/steps (treads/risers/dados etc ) with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thich screed bed in CM 1:6 all as specifed and dirrected.

M&L for 20-25 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, including Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cement using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM (1:6) necessary cutting, notching etc for sink all as specified & directed..

M&L Machine cut cudappah stone slab 20mm to 25 thick, over and including cement screed bed in CM 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing necessary cutting, notching etc for sink complete all as specified and directed.

Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4 complete all as specified and directed.

Description all as per ser item no. 19.00 above but exc 1.5sqm and n exc 4sqm each - do -. complete all as specified and directed.

Taking down wooden shutters of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.

Description all as per ser item no. 19.00 above but n. exc 1 sqm complete all as specified and directed.

S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed. Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate.

S&F for 30 mm thick flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed.

S&F 30mm thick plain framed, panelled Shutters of (two panel), moulded on IInd class hard wood rail and styles with lock rail and panel of 12 mm BWP grade BWR Plywood. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F size 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter of comprising of virgin PVC polymer of K value 58-60 (suspension Grade) calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650kg/cum, screw withdrawal strength of 1800 N (face) & 900N (Edge) minimum comprehensive strength of 50N/mmsqr, modules of elasticity 850N/mm sqr and resistance to spread of flame of class A category with property of being terminate/ borer proof, water /moisture proof and fire retardant. Stainless steel but hinges of required size with necessary with full body threaded star headed counter sunk SS Screws complete all as specified and directed.

M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.

S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at siteall as per direction.

S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165. complete all as specified and directed.

M&L for 2nd class hard wood for plain, solid, straight chowkats and frames for doors, wondows, ventilators etc. wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position complete all as specified and directed.

S&F 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed complete all as specified and directed.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc complete all as specified and directed.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 12mm thick required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 12mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc complete all as specified and directed.

S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed.

Description all as per ser item No. 39.00 above above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed.

Description all as per ser item No. 39.00 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed.

Description all as per ser item No. 39.00 above but grain basket size 20 x 19 x 6 inches complete all as specified and directed.

Description all as per ser item No. 39.00 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed.

Description all as per ser item No. 39.00 abovebut plain basket size 20 x 19 x 8 inches complete all as specified and directed.

S&F 10mm long stainless steel handles for kitchen/Cub board cabinet shutters etc complete all as specified and directed.

S&F of door seal 20 to 25 mm wide with GI Powder coated flap 0.9 to 1m length fixed to wooden doors shutter with screws, complete all as specified and directed.

S&F 100mm long of Aluminium anodised hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F 100mm long Aluminium anodised floor door stopper with hard drawn steel spring long, complete all as specified and directed.

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 100mm of Butt hinges with galvanised MS hinge pin, aluminium anodised extruded, B-21 type, complete all as specified and directed.

S&F 300mm of MS ordinary rat tail rod pattern springs incl roller & roller plate, complete all as specified and directed.

S&F 40mm dia of wooden bright polished Cup board knobs, size with nut, screw & washer, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

S&F of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed.

S&F SS wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium /steel frames complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed.

S&F for 5mm thick Sheet glass of size exc. 0.5 Sq. m each pane, ordinary quality duly covered with tinted solar control film 25 micron, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed.

S&F mild steel flat iron of size 25x4 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and directed.

S&F, in repair Mortice lock alumunium body, vertical type of size 100mm of 4 levers etc compete all as specified and as directed

S&F SS curtain rod 25mm dia grade with fancy round knob both ends and brackets complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M&L rendering/screeding 15mm thick cment mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as directed by the Engineer - In- Charge.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge.

Preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint.

Preparation of New steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.

Dismantling wall and ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets.

S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mm x24mm x0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as directed.

S&F 4 mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed.

Taking down wall panelling and similar work etc and complete all as specified and directed

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 exc half brick but n exc one brick complete all as specified and directed.

M&L for PCC (1:2:4) Type B1 (using 20mm graded stone aggregate) in wall, boundary pillars and post or similar work for hold fast in door and windows etc complete all as specified and directed.

M & L brick work with fly ash bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed. Note : Old clay brick optained from demolition will not be utilised in work.

M&L for Brick work old size with fly ash bricks, straight or curved on plan to any radius radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S & F in reparis Flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specifed and directed

S & F in repairs 32/40 mm Pvc downpipe for kitchen sink fitted to Kitchen Sink incl all necessary brackets etc all as specifed and directed.

S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S & F Colour EWC model LYS-IVY -0204 of Jaquar,Cera CAT NO S10 44147RG,Hindware Ittalian collection CAT NO92538 or Equvlent ‘S’ trap vitreous china including all fittings i.e seat cover, cistern super water saver dual, flush tank fitted in wall hung Equvalent of same make complete all as specified and directed.

S&F Two way Bib cock with wall flangeJaquar FLP 5041P,Hindware F530004 CP Equvalent of same make complete all as specified and as approved by GE.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china, white, wash hand basin, flat back size 550mm x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand &over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook and necessary screws and clamps etc complete all as specified and directed.

S&F in repair 110mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repairs 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repairs 15mm bore brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F in repair laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S&F in repair laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed.

S & F of CPVC brass elbow (3/4" X ½") for 20mm outer dia CPVC pipe complete all as specified and directed.

S & F in repairs Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (1ny size of pattern), including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store all as specified and directed.

S & F 110mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors or trenches including digging and making good as existing complete all as specified and directed.

S & F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or laid in floors or trenches including digging and making good as existing complete all as specified and directed.

S & F PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia with access door complete all as specified and directed.

S & F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

M/s. Shubh constructions (BID ID -3496925)

RK CONSTRUCTION (BID ID -3494505)

M/S GARG CONSTRUCTION (BID ID -3495150)