Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 CrAccepted-AOC PLOT NO 5 SATHYAM GARDEN UYIRIYAL POONGA ROAD GORIMEDU SALEM 636 008 | SALEM | SALEM | TAMIL NADU | 636008 | ₹7.1 Cr Quoted ₹7.5 Cr | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical NO 24 JAWAHAR STREET NEW FAIR LANDS SALEM 636 016 | SALEM | SALEM | TAMIL NADU | 636016 | - | - | Rejected-Technical BQR NOT SATISFIED |
| Sl No | Description | Qty | Unit | RAJ ENGINEERING CONTRACTOR L1 |
|---|---|---|---|---|
| 1.00 | Clearing Heavy jungle and disposing off to a place away from the site as directed by the Engineer in charge including all labour charges, T&Ps etc., complete. | 6,200 | sqm | 5 ₹31,000 |
| 2.00 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil | 2,392 | m3 | 350 ₹8.4 L |
| 3.00 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In SDR (Not Requiring Blasting) | 502 | m3 | 350 ₹1.8 L |
| 4.00 | Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10 lit of water etc., complete. | 172 | sqm | 50 ₹8,600 |
| 5.00 | Laying of lime mortar in 1:2 ratio for foundation basement to increase the foundation stability including cost of materials, laying, consolidation etc., complete. | 319 | m3 | 2,500 ₹8.0 L |
| 6.00 | PCC 1:3:6 using 20mm HBG metal for foundation including cost of cement without formwork all materials, labour, lead, lift etc. complete. | 402 | m3 | 6,500 ₹26.1 L |
| 7.00 | PCC 1:2:4 mix using 20 mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. Without Form Work | 38 | m3 | 7,000 ₹2.7 L |
| 8.00 | PCC 1:2:4 mix using 20mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. With Form Work | 5 | m3 | 10,000 ₹50,000 |
| 9.00 | RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room footing concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room footing concrete ) | 100 | cum | 10,000 ₹10 L |
| 10.00 | RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room column concrete with formwork upto base ment including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room column concrete upto base ment ) | 14 | cum | 20,000 ₹2.8 L |
Tender Value
Refer Docs
EMD Value
₹6.2 L
Closing Date
29 Aug 2025, 2:30 pmClosed
CE/TP-I/CNI
O/o the Chief Engineer/Transmission Projects I / Chennai, 3rd Floor , 110 KV GIS Substation building A-10, Guindy Industrial Estate, Guindy, Chennai -32
establishment of new 110/22 KV SS with 2 X 10 MVA Power Transformer capacity at Thennangudipalayam 110/22 KV SS in Salem EDC
2025_EB_593444_1
TP1-54/2025-26 OF CE/TP-I/CNI
Open Tender
Civil Works
270 days
THENNANGUDIPALAYAM
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹6.2 L
27 Mar 2026
15 Aug 2025
30 Aug 2025
15 Aug 2025
29 Aug 2025
15 Aug 2025
Amount
Clearing Heavy jungle and disposing off to a place away from the site as directed by the Engineer in charge including all labour charges, T&Ps etc., complete.
Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil
Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for In SDR (Not Requiring Blasting)
Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10 lit of water etc., complete.
Laying of lime mortar in 1:2 ratio for foundation basement to increase the foundation stability including cost of materials, laying, consolidation etc., complete.
PCC 1:3:6 using 20mm HBG metal for foundation including cost of cement without formwork all materials, labour, lead, lift etc. complete.
PCC 1:2:4 mix using 20 mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. Without Form Work
PCC 1:2:4 mix using 20mm down graded HBG machine crushed metal for plinth foundation concrete, cost of all labour, materials, lead, lift, curing etc. complete as per standard specification. With Form Work
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room footing concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room footing concrete )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room column concrete with formwork upto base ment including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room column concrete upto base ment )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room column concrete with formwork above base ment upto ground floor base ment including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room column concrete above basement upto Ground floor )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room Grade beam concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room Grade beam )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room Plith beam concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room Plinth beam )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room Continous lintel beam with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room Continous lintel beam )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room sunshade with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room Continous sunshade concrete)
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room roof beam with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room roof beam concrete )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for control room roof slab of 130 mm tk with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For control room roof roof slab of 130 mm tk )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for Septic tank & Oil sump slab tk with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( for Septic tank & Oil sump slab )
RCC 1:1.5:3 using 12 to 20 mm machine crushed metal for Raft concrete without formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For raft concrete)
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for Plinth concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Plinth concrete )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for cable duct bottom slab concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Cable duct bottom raft )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for cable duct Side wall concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Cable duct side wall )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for Culvert top slab concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Culvert top slab )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for road concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For road concrete )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for retaining wall heel slab with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Retaining wall heel slab )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for retaining wall stem wall with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Retaining wall concrete )
RCC 1:1.5:3 using 12 to 20mm machine crushed metal for precast cable duct slab with formwork including cost of all materials, labour lead, litf, curing, etc., complete. Excluding the cost of steel reinforcement ( For Pre cast cable duct slab )
Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete.
Brick work in CM 1:5 using II class chamber burnt bricks for basement, superstructure & gate pillar including cost of all materials, all labour, lead, lift, curing, etc., complete.
Brick work in CM 1:3 using II class chamber burnt bricks for partition wall including cost of all materials, all labour charges, curing, lead, lift, etc., complete.
Plastering with CM 1:5, 12 mm thick for walls including cost of all materials, curing, labour, lead, lift, etc., complete.
Plastering with CM 1:3 12 mm thick for ceiling, beams, sunshade,plinth work including cost of all materials, curing, labour, lead, lift, etc., complete.
Providing Damp proof course using cement mortar 1:3, 20 mm thick with water proofing compound including cost of all materials, lead, lift, etc., complete.
White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete.
Colour washing 2 Coats over a base coat of primer using Exterior weather coat using Asian APEX or Equivalent of approved Brand,quality and colour for outer wall surfaces for all floors including cost of all labours to work at all levels cost of materials brushes scaffolding charges etc. complete complying with standard specification and as directed. for Plinth concrete
Painting the inside walls and control room front face with two coats of best quality interior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials and scaffolding etc. complete.
Painting out side walls with two coats of best quality exterior emulsion over primer one coat of approved colour including cost of all materials and scaffolding etc. complete.
Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8 mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20 mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. ( sample to be approved by Dept.Engineer)
Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 8mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20 mm thick laid in-situ and pointed with same coloured cement ( sample to be approved by Dept.Engineer)
Flooring with approved ceramic tiles 305mmx305 mm non slipery over cement mortor 1:3 20 mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete ( sample to be approved by Dept.Engineer)
Paving the floor with best approved quality Pre-polished anti-skid step tiles of 20 mm thick laid over a cement mortar bed of 20 mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete as per standard speicification. (sample to be approved by Dept.Engineer)
Dadooing walls with approved quality of Glazed tils of size 300x200 laied in cement mortor 1:2 10mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)
Dadooing walls with with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 8 mm of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10 mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Providing and laying weather proof Tiles 300 mm x 300 mm size over screed concrete 1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tiles of approved quality using in cm 1:3, 12 mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials ,transport curing etc complete.
Supplying and fixing of anodized aluminium fully glazed door using 101.60 x 44.45 x 2.10 mm box section for outer frame, 53.70 x 44.50x2.30mm @1.238kg/m box door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 6mm clear glass including cost of alum clips rubber beedings alum fixtures such as tower bolt, pivot automatic hydroulic door closure brass mortice lock handle ok. Including cost of all materials, labour, leads, lift etc. complete. (1.20x2.40m size single leaf)
Supplying and fixing at anodized aluminium door using 101.60x44.45x2.10 mm @1.608 kg/m box section for outer frame. 53.70x44.45x2.30 @ 1.238 kg/m door vertical and top 83.50x44.45x2.4mm box section for bottom panels with 9mm thick regular grade pre laminated particle board & top panel with 5.5mm thick clear glass including cost of alum. Clips rubber beedings alum. Fixtures such as tower bolt, pivot brass mortice lock handle,with hydralick Door closer etc. of approved quality including cost of all materials, labour, leads, lift etc. complete (1.00mx2.20msize single leaf)
Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials, lead, lift, etc., complete.
Supply and fixing in position of anodized aluminium glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.
Supply and fixing of Aluminium Ventilator fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials, lead, lifts, labour, etc., complete.
Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site
Supplying and fixing in position IWC ORISSA PAN of size 580 X 420 mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete.
Supply and fixing of white colour wash basin of size 550 x 400 mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete.
Supplying and fixing in position 110 mm dia, best quality ventilating shaft 3.65 m height with PVC cowl at top inlcuding cost of all materials, curing labour, leads, lifts, etc., complete.
Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete
Supplying and filling with 40 mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete.
Supply and fixing 110mm dia PVC down fall pipe 4 kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead, lift, etc., complete.
Providing and laying PVC high density pipe (10 kg. per cm2 ) for provide weep holes in the retaining wall including all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 50 mm dia
Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 40 mm dia
Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 32 mm dia
Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 25 mm dia
Providing and laying PVC high density pipe (10 kg. per cm2 ) including cost of all specials like coupling, bend etc., and including necessary earthwork and burrying , all material labour, etc., complete and as directed by the Engineer-in-charge at site.. For 20 mm dia
Providing and fixing Gate valve of 40 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.
Providing and fixing Gate valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.
Providing and fixing wheel valve of 32 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.
Providing and fixing wheel valve of 40 mm diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete and as directed by the Engineer-in-charge at site.
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing of 20 mm PVC bib cock including cost of all materials, etc., complete.
Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For S Type chair (Local rate)
Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Three drawer steel table with Sunmica top of size 1200x750x750mm
Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Steel side rack open type 1100x400x1200
Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For Steel half bench 1200x400x600mm
Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. For PVC Nylon chair of approved quality
Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete.
Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.
Supplying and fixing Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lift, etc., complete
Supply, Transport & fixing of GI angles for cableduct splitting the fixed end of angle for anchorage and placing in position as directed by the engineer at site including cost of angles including cost of material, all labour, lead, lift, etc., complete.
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification.
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications.
Providing projected border of 7.50 cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing, etc., complete.
Providing projected border of 20 cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Supplying and fixing 110 mm dia PVC.Bend including cost of materials, labour, lead, lift, etc., Complete
Supplying and fixing 110 mm dia PVC TEE including cost of materials, labour lead, lift, etc., Complete
Supplying and fixing of two side polished 20 - 30 mm tk cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete
Supplying, filling & spreading of good quality gravel layer by layer with proper consolidation for control room inside and yard area including cost of all materials, labour, lead, lift etc., Complete.
Writing the name of sub station and safety slogn on wall over plasterd surface using approved colour and quality enamel paint over a cost of primer including cost of all materials , lead,lift etc., complete
Conducting Water divining Test for fixing of Bore well point including cost of all hire charges of T&P and Transport charges etc complete.
Drilling bore well of 150 mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification. Upto 100 Mts
Drilling bore well of 150 mm dia 6” in all soils, hard rock etc., including transporting of machineries with equipments and all necessary T & P’s labouretc., complete as per specification. Beyound 100 Mts
Supply and erection of 180 mm (7”) dia rigid PVC casing pipe, having 6 kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well.
Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects.
Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects.
Supply and erection of 40 mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead,lift etc., complete.
Supply and erection of 20 mm dia HDPE hose in black colour and havingISI mark and as per IS 4984 - 87, (15 Kg/CM²) in and outside of bore well including cost of all materials, labour, lead, lift etc., complete.
Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm) with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects.
Supply and laying of 12 mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift as per the instruction of Engineer in charge at site.
Labour charges for laying of 4 core 6 Sq mm power cable from nearest power point to 5 HP motor including earth work excavation ,laying power cable in the pit and top covered with country bricks and refilling with excavated earth, lead. lift ,etc. complete
Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.
Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 1.5 sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point/fan point
Supply and run of 2 x 1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V gradein in PVC rigid pipe concealed in wall and ceiling with continuous earthwire connection of 1.5 sq.mm copper wire for making good of the concealed portion with suitable colour
Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking wall socket with 5A fluh type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.
Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 Pin non interlocking wall socket with 15A fluh type switch with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power Plug point.
Supply and fixing of 32 A TPN MC switch on suitable angle iron frame work with MS cable entry box with earth connection only.
Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.
Supplying and fixing of 4'-40 w single flouresent fitting complete with copper choke and condenser with conduit pipe suspension from the ceiiling with PVC copper leads from the terminals to the fitting with flouresent fitting
Supply and fixing of 4' 40 W Twin Mirror optic suspension type fitting (Philips / Crompton / Wipro) complete with louvers cover complete with copper choke and condensor with conduit pipe suspension with PVC unsheathed Copper leads from the terminals to the fittings with flu. tubes.
Supplying and fixing of water tight Bulk head fitting suitable with guard and 100 w LED bulb.
Supply and fixing of fancy glass shade and 7 W / 9 W LED bulb
Supply and fixing of 1400 mm sweep (56") AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod including fan clamp with side plates and cross arm of size 450 mm.
Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.
Supplying and fixing of RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.
Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).
Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.
Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work, with earth connections.
Refilling the excavated earth including all lead, lift etc, complete.
Removal of excess earth to a distance of 2.00 Km with all lead, lift etc., complete
Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete.
Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm including cost of all materials,transport to site , labour, lead, lift, etc., complete., as per standard specification.
Providing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 4 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification and as directed by the Engineer-in-charge at site.
Fabrication, galvanizing and supply of foundation bolts of 20 mm dia including providing cleat at bottom and threading at top including cost of all materials, labour lead lift etc., complete.
Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site
Supplying and fixing of MS rails of size 90/120 lbs for transformer plinth at site including cost of all lead, lift, etc., complete.
Supplying and fixing 6.00 m wide gate and 1.00 m wide wicket gate including cost of all materials lead and lift etc., complete including painting with two coats enamel paint over one coat of red oxide.
Writing the name of sub station on wing wall over plasterd surface using approved colour and qualityenamel paint over a cost of primer including cost of all materials , lead,lift etc., complete
Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.
Supply and fixing of 50 Sq.mm GI Chain link fencing of 9 gauge with standard width of 1.80 m height including cost of all material, labour for fixing, transportion, lead, lift, etc., complete.
Supplying and spreading of both metal jelly and stone dust with metal jelly of size 12 mm to 20 mm to an average thickness of 10 cm and over 10 cm stone dust including cost of all materials lead, lift watering and levelling surface etc., complete.
Supply of NP3 Class RCC Pipe confirming to IS 458/2003 including cost of pipe as a finished work including all other incidental charges, testing charges including loading, unloading, transport and delivery in good condition at work site etc., complete, as directed by the Departmental Officers, as per standard specifications. 900 mm Dia
Hoisting and fixing of NP3 Class RCC Pipe and Collars in proper gradient including all labour charges and all other incidental charges etc., complete, as directed by the Departmental Officers, as per standard specifications. 900 mm dia
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - RS JOIST 200X100 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - 6 mm Chequared plate
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MSC 125X65 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MSC 100X50 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MSC 100X100X8 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MSC 65X65X6 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MSC 50X50X6 mm
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - M.S.Flat 50x8mm (Earthmat and light section)
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - M.S Flat 65 X 10 mm (Earthmat and light section)
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - MS Rod 40 mm (Earthbore and Earth spikes)
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - RTS ROD 20mm (Including I-bolt Rod)
Supply of the Iron & Steel Items as per relevant IS of various required lengths for Structures and other purposes as directed by the Field Engineer - RTS ROD 6mm
Supply and erection of 6 Bolt Tension Fitting as per relevent IS.
Supply and erection of 4 Bolt Tension fitting as per relevent IS.
Supply and erection of SE clamp for Single Zebra as per relevent IS.
Supply and erection of SE clamp for 3" bus bar as per relevent IS.
Supply and erection of SE clamp for 2" bus bar as per relevent IS.
Supply and erection of Free end Clamp for 3" Bus bar as per relevent IS.
Supply and erection of Free end Clamp for 2" Bus bar as per relevent IS.
Supply and erection of 'T' clamp for Zebra to Zebra as per relevent IS.
Supply and erection of 'T' clamp for Zebra to 3" busbar as per relevent IS.
Supply and erection of 'T' clamp for Zebra to 2" busbar as per relevent IS.
Supply and erection of P.G. clamp for Zebra as per relevent IS.
Supply and erection of Reducer clamp for 3" Bus bar as per relevent IS.
Supply and erection of L- clamp for zebra as per relevent IS.
Supply and erection of Corona bell for 3" Busbar as per relevent IS.
Supply and erection of Corona bell for 2" Busbar as per relevent IS.
Supply and erection of Switchend clamp for panther as per relevent IS.
Supply and erection of Switch end clamp for mink as per relevent IS.
Supply and erection of Bus bar jointing clamp for 75 mm as per relevent IS.
Supply & Erecion of GI STEEL TUBULAR POLE FOR STREET LIGHT 8.0 mtr Length Double Bracket Pole with Base Plate (250X250x6mm) 114.30mm OD x 5.40mm Thick x 4500 mm Length, 88.90mm OD x4.85mm Thick x1750mm Length, 76.10 OD X 3.25mm Thick X 1750mm Length
Supply & Erecion of GI STEEL TUBULAR POLE FOR STREET LIGHT 8.0 mtr Length Single Bracket Pole with Base Plate (250X250x6mm) 114.30mm OD x 5.40mm Thick x 4500 mm Length, 88.90mm OD x4.85mm Thick x1750mm Length, 76.10 OD X 3.25mm Thick X 1750mm Length
Supply & Erecion of GI STEEL TUBULAR POLE FOR STREET LIGHT 6.0 mtr Length Double Bracket Pole with Base Plate (250X250x6mm) 76.10 mm OD X 3.65mm Thick X 6 000 mm Length
Supply & Erecion of GI STEEL TUBULAR POLE FOR STREET LIGHT 6.0 mtr Length Single Bracket Pole with Base Plate (250X250x6mm) 76.10 mm OD X 3.65mm Thick X 6000 mm Length
Supply of AC Black paint
Supply of Red- Oxide Paint
Supply of Aluminium Paint
Supply of Fire extinguisher foam type trolley mounted 50 Ltr capacity with accessories
Supply of Fire extinguisher DCP type trolley mounted 25 KG Capacity with accessories
Supply of Fire extinguisher foam type trolley mounted 9 Lt capacity with accessories
Supply of Fire extinguisher DCP type Portable 9 kg capacity
Supply of DCP 6kg Portable capacity
Manufacturing & supply of fire bucket of 10 Ltr capacity made out of 26 SWG sheet.
Supply of Rubber mat of size 2000X1000X10 mm
Manufacturing & supply of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet
Supply of cable tray GI Ladder type cable tray 2.5mts long, 0.6m width and 2mm thickness with couplling plate and bolt and nuts.
Supply of cable tray GI Lader type cable tray 2.5mts long, 0.45m width and 2mm thickness with couplling plate and bolt and nuts.
Supply of cable tray GI Lader type cable tray 2.5mts long, 0.3m width and 2mm thickness with couplling plate and bolt and nuts.
Supply of Phase indication plate
Supply of Danger board
Supply of Rubber Gauntles
Supply of earth rods made of PVC/ wood with copper plates & 6 mm cables
Supply of Digital earth resistance megger
Supply of Digital multi meter of reputed make
Supply of 5 Kv Digital megger of reputed make
Supply of Digital clamp meter tong tester (1A to 100 A to 500 A to 1000 A)
Booklet containing all drawings, test resullts, equipment details, comissioning and handing over report as required by field engineer
Labour for fabrication of heavy section without length wise welded joints (Sectional weight 14 Kg/m and above)
Labour for fabrication of heavy section with length wise welded joints (Sectional weight 14 Kg/m and above)
Labour for fabrication of light section (Sectional weight below 14 Kg/m)
Labour charges for erection of heavy sections.(Sectional weight 14 Kg/m and above)
Labour charges for erection of light sections.(Sectional weight below 14 Kg/m)
Labour for rust removing cleaning painting of first primer coat(red oxide paint ) of all sections including cost of paint, brush and consumables.
Labour for removing,cleaning painting (Aluminium)of first finishing coat of all sections including cost of paint, brush and consumables.
Labour for painting (Aluminium)of second finishing coat of all sections including cost of paint, brush and consumables.
Labour for transporting of iron & steel from chennai (300 Kms) with loading and unloading
Labour for erection of 100 KVA, 22KV/433V Station transformer with HG fuse set with all accessories, etc., with own crane arrangement
Labour for erection with own crane arrangement and connecting link rod,SF6 Gas filling and other consumables and as directed by the field engineer - 110 KV SF6 Circuit Breaker
Labour for erection with own crane arrangement and connecting link rod,SF6 Gas filling and other consumables and as directed by the field engineer - 33 KV/22 KV VCB
Labour for erection of Measurement Transformer with own crane arrangement including providing holes wherever required,fixing junction box and other consumables and as directed by the field engineer - 110 KV without using Board crane (one single unit)
Labour for erection of 33/22/11 KV CT,PT, NCT, Reactor,Auto recloser(one single phase unit or 3 Ph unit) including providing holes wherever required and fixing of junction box and as directed by the field engineer- 33 KV without using Board crane (one single unit)
Labour charges for erection of CT/PT junction box including fabrication of clamp.
Labour for erection of AB Switches , including the cost of lubricant,consumables and wiring (if necessary) alignment checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer - 110 KV with Earth motor operated
Labour for erection of AB Switches , including the cost of lubricant,consumables and wiring (if necessary) alignment checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer- 110 KV without Earth motor operated
Labour for erection of AB Switches , including the cost of lubricant,consumables and wiring (if necessary) alignment checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer - 22KV/33 KV Hand operated isolator without earth
Labour for erection of LAS -110 KV L.A.S. Station type with surge monitor
Labour for erection of LAS - 22 KV L.A.S. Station type
Labour for erection of LAS -22 KV Distribution type LAS
Labour for erection of Insulators single pole stack up right,under hang or suspension - 110 KV
Labour for erection of Insulators single pole stack up right,under hang or suspension - 22 KV
Labour for Erection of Panel / Battery charger (Simlex indoor / out doors ) including alignment and earthing as directed by field engineer
Labour Charges for removing rust,primer coat first and second coat painting both sides & in M.S. Boards RS joists & Yard light pole etc., including cost of enamel paint ( Dulex, Asian, Berger is preferred) and other consumables as directed by th field Engineer.
Labour charges for writing details in finished surface boards including cost of enamul paint ( Dulex, Asian, Berger is preferred) and other consumables as directed by th field Engineer.
Fabrication and fixing of bell mouth providing jumper connection in the solidcore / PT insulators including the cost of GI Pipe 50 mm dia one meter & other consumables as directed by th field Engineer.
Labour for loading or unloading or shifting of non fragile material without using board crane (one operation)
Labour for loading or unloading or shifting of fragile material with own crane arrangement (one operation)
Labour for loading or unloading or shifting of 110KV and above breakers,CT,PT& etc., by own crane arrangement (one opeartion)
Supply and providing of 600 mm mean dia ,300 mm height ,36mm thick cement collar for identification of earth electrode location including 1 Primer and 2 coats of colour wash as directed by the field engineer.
Labour charges machineries , consumables for erection of earth mat and earth raisers as directed by the field engineer at site.
Labour charges machineries , consumables for fabrication of Earth electrode 10 mtr/6mtr length or as directed by the field engineer.
Labour charges machineries , consumables for fabrication and erection of Earth spikes.
Providing 140/150 mm dia bore including labour ,lead,lift etc.,complete mobilization in all types of soils and erection of earth electode,supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil with water5 Kg/m depth in earth bore and pouring water and tightening of earth bore, upto satisfactory earth.
Labour for excavation and refilling of trunch of avg.width of 0.3 m & avg depth of 0.8 m for earth mat and avg.depth of 0.4m for laying of cable below fixed yard level and any of size as required.
Labour for stringing of strung bus including hosting of insulator- 110 KV Single zebra conductor (1 span 3 runs )
Labour for stringing of strung bus including hosting of insulator- 33/22/11 KV Single zebra conductor (1 span 3 runs )
Labour charges for erection of Bus bar including fabrication and any modification of end clamp wherever necessary and as directed by field engineer - 75 mm IPS Aluminium tube with making bend
Labour charges for erection of Bus bar including fabrication and any modification of end clamp wherever necessary and as directed by field engineer - 75 mm IPS Aluminium tube without making bend
Labour charges for erection of Bus bar including fabrication and any modification of end clamp wherever necessary and as directed by field engineer - 50 mm IPS Aluminium tube without making bend
Labour for erection of droppers and jumpers including fabrication and any modification of end clamps wherever necessary and as directed by the field engineer.
Supply and termination of cable core ends including the cost of cable socket, lug ferrules, straps etc., as per cable schedule and as directed by the field engineer. (No. of core ends in unit of 1000)
Labour for laying of cable in duct / trench including the cost of Aluminium tag for identification. Upto 8 core
Labour for laying of cable in duct / trench including the cost of Aluminium tag for identification. Above 8 core
Labour for laying of cable and clamping in structures. Upto 8 core
Labour for laying of cable and clamping in structures. Above 8 core
Labour for erection of cable end glands
Labour for erection of yard light pole including laying of cable inside pole.
Supply and erection of LED Lamp 70/ 72 W fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 Amps 2 way strip connector and other consumables.
Labour charges for painting of earth raisers by green enamul painting and wherever required including cost of paint(Dulex,Asian Berger prefered)and other consumables .
Labour for charging of 110V , 300 AH Battery set
Labour for battery set erection including assembling wooden stand, painting of acid proof paint 110V, 300 AH battery set.
Labour for hot dip galvanising mild steel materials wherever necessary as directed by the field Engineer
Supply and fixing of DC MCB in panels/boxes of reputed make 2 Pole 16 Amps
Hire charges for crane provided (12 Tonne) for any loading,unloading or shifting of equipments done by department or by contractor
Providing four nos Watch & Ward personals(for morning shift 1person,2nd shift 1 person and night shift 2 person ) from the date of handingover site, to till the date of comissioning of SS , to safe all the equipments and materials at site (Max 2 Months)
Labour charges for Manufacturing and supply of bolt of required length of 18 to 20 mm dia GI rod and 2 nos GI nuts & washer as directed by field Engineer ( Eye Bolt )
Supply and provision of M8,M9,M10,M12 & M16 full thread G.I. Bolt , Nuts & GI washer of various size for erection of Insulators or any other purpose wherever required and as directed by field Engineer
Supply and provision of stickers,stickers on 3mm PVC form board to be used for equipment details, slogan, name board etc., as directed by field Engineer
Manufacturing & Supply of yard light box of size 200W X 200H X 150D mm out of 18 SWG(1.2 mm) M.S.Sheet with cable entry holes,fixing arrangements for fuse units and mounting clamps as directed by the field engineer including the cost of all materials.
Supply and fixing of wooden board 25 mm/Hylam sheet of 10 mm thick for fixing of fuse units wherever required as directed by the field Engineer
Supply and Erection of G.I.Wire No.6 for Yard light pole Earthing
Supply and erection of M.S.rod of 6mm dia for fencing Barricade as directed by the field Engineer
Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer - 19 /22 mm
Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer - 25/28 mm
Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer - 32 mm
Supply and fixing of Bakelite HRC / porcelain Rewireable fuse holders in panels 2/5/10/16Amps (Fuse base +Fuse link)
Supply and fixing of Bakelite HRC / porcelain Rewireable fuse holders in panels 63 Amps (63 Amps Fuse base +63 Amps Fuse link)
Supply and fixing of ISI mark porceline rewirable fuse unit of reputed make in panels,boxes for AC circuits wherever required as directed by the field engineer. - 200 Amps.
Supply and fixing of disconnected type terminal block suitable for C.T circuits in panel / box as required and as directed by field engineer
Supply and fixing of (Godrej) 6 lever Navtal lock with duplicate keys for AB Switch and for any other purpose including the cost of ring and key token as directed by the field engineer
Supply and fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose ,on any sizes, including the cost of copper lugs at both ends etc.as directed by field Engineer.
Fabrication, supply and fixing of A.C. Distribution box of size 750 W X 250 D X 750 H mm out of 14 SWG (2mm) M.S. Sheet wherever necessary as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB, detachable gland plate and locking arrangements including cost of all materials.
Fabrication supply & fitting of CT/PT junction box out of 14 SWG(2mm) M.S Sheet, wherever required as directed by the field engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials.- size 400W X 150DX 300 H.
Manufacturing and supply & fixing of LC/Key board (with numbered token for keys) / earthmat diagram (Laminated) out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements.LG glass piece should be fastened on the glass shutters for opening and clossing wall clamp made out of 6mm plate should be provided on as per drawing and as directed by the field Engineer including cost of all materials. (Letter size to be specied, company name will not be provided in the LC Board)
Supply and erection of 'B' class GI pipe for extension of tandum/down pipe for AB switchs and for any other work as required by and as directed by the field engineer. - 40 mm dia.
Labour charges for drawing layout and writing details in LC/Key board including coswt of enamul paint(Dulex,Asian,Berger preferred) and other consumables as directed by the field engineer.
Fabrication, Supply & fixing of main equipment board of Various size & Fire stand & etc, as per drawing and as directed by the Executive Engineer , including cost of all materials.
Supply and fixing of AC 3 phase 4 pole 415 V ISI mark change over switch of reputed make as required and as directed by the field engineer.- 200 Amps
Supply & fixing of mounting channel suitable for CBTM5 terminal blockin panel/box as required and as directed by field engineer
Supply and fixing of nut type CBTM5 or equivalent terminal block in Panel / Box as required and directed by the field Engineer.
Supply & Fixing of ISI make MCB (AC) in panels/Boxes of reputed make as directed by the field Engineer - 3 Pole 63 Amps.
CGST in % (For Bidders inside TamilNadu)
SGST in % (For Bidders inside TamilNadu)
IGST in % (For Bidders outside TamilNadu)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_708713.xls
BOQ • 0.55 MB
Download all tender documents and submit your bid