SPL REPAIR TO EXISTING BOUNDARY WALL AT IG COLONY AND PROVN 02 X CAR PARKING SHED AT APPT HOUSE BLDG NO-11A RACE COURSE (NIRMAYA HOUSE) OF MH JABALPUR UNDER GE (W) JABALPUR

Amount

Excavation in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation. Etc, for pipes, walls, cesspits, manholes,pier holes, cables etc as in soft/loose soil and getting out complete all as specified and as directed.

Excavating over areas n exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed

Excavating over areas exc 1.5m depth but n exc exc 3m getting out in soft/loose soil complete all as specified and as directed

Returing, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick each layer complete all as specified and as directed.

Removal of excavated soil to a distance not exc. 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in foundation including raft footings, foundation beams, plinth beams, bases of columns and the like complete all as specified and as directed.

M & L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in coloumn,pillars,piers, posts and struts complete all as specified and as directed.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similarwork for rough finished surface of concrete complete all as specified and as directed.

Use and waste of form work to sides of pillars, posts, struts,piers, columns and stanchions square or rectangular for rough finished surface of concrete complete all as specified and as directed.

Use and wasteof workwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressummers,lintel, cantilevers shelves including supports, overhang etc also splays between floors and beams etc to rough finished surfaces of concrete flat complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, precast concrete articles complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. ( Note:- WPC shall be measured and paid saperately)

Supply only Integral Waterproofing Compund complete all as specified and as directed.

M&L for Two Coats of Cement Base Paint over a coat of alkali resistant primer Newly Plastered Surfaces of external Walls including preparation complete all as as specified and as directed.

M&L for complete removal of existing treatment on old undecorated surface of walls and applying two coats of cement base paint on external wall with alkali resistant primer including preparation complete all as specified and as directed. Note:- Curing shall be done before and after applying of paint.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Mild steel angle iron as in posts and struts including embeding in concrete , notching for wire , cutting tops to shape,drilling holes, bolting etc., conforming to Fe 290-0 or Fe 165-0 complete all as specified and as directed .

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. (Note: reinforcement where provided shall be measured and paid seprately)

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm and over dia and cut to length, bent to shape required incl cranking, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto 10mm and cut to length, bent to shape required incl cranking, but as in stirrups, spacers and binders complete all as specified and as directed.

M&L for applying two coats of synthetic enamal paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth not otherwise described including preparation complete all as specified and as directed

M&L for applying one coat of synthetic enamel paint on old painted surfaces of steel of any description not other wise described over 10cm width or girth including preparation complete all as specified and as directed

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

S&F for galvanized 2-strand, steel barbed wire 2.24 mm dia with 2mm dia barbs at 75mm spacing and straining and fixing to any type standard rails straining bolts, including securing or tying at cross with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed. Note: Each line wire to be measured separately.

S&F for mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-290 Gde -E-165 complete all as specified and as directed.

S&F for Punched tape concertina coil made out of low carbon strip duly electro galvanised , dia of wire not less than 2.59mm, dia of coil 600mm (appx) when closed with all necessary clips and RBT wire to connect with angle iron or brackets etc with all accessories. (6.00 RM coil weighing not less than 15 kg streched to not more than 10.00 RM having not more than 51 circles /turns ) complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed

M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) for Wall lining (Veenering to wall ) 12 mm thick in cement mortar (1:3) and pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite complete all as specified and as directed.

S&F for 110mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints lain in trenches or in floors complete all as specified and as directed.

M&L for SS Box Type Letters in,Letter Height -12" to 18", No. of Letter 35 to 40 ,White ACP for Glowing of SS Letters including installation charges as per specifications and drawing complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and as directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out in soft/loose, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in fdn filling and mass concrete complete all as specified and as directed.

M & L for Hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete type D-2 ,1:4:8 , (using 40mm graded stone aggregate) as in sub base to floor complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 ,Type B2 ,using 40 mm graded aggregate as in paving /path finished fair and even complete all as specified and as directed.

S&F for rolled section as in man and cross beam ,hip and jack rafters ,purlin where connected to common rafters and running rails and guides for sliding doors ;fixed for sliding ;fixed with angle cleats or other connecting plates complete all as specified and as directed.

M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E-165) complete all as specified and as directed.

S & F for mild steel bolts exc 20 & n, exc 25 mm dia, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and as directed.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated surfaces of of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preparation complete all as specified and as directed..

M&L for brick work with kiln burnt bricks old size bricks built in CM (1:4) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of bricks or concrete surfaces in CM 1:6 finished fair and even complete all as specified and as directed.

M & L for 50 mm thick sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS - 15658-2006 of M-35 Grade with pigment and having any colour red,yellow or as approved by Engr-in-charge complete all as specified and as directed.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

(a) One light point controlled by one switch.

(c) One socket point controlled by one switch on same board.

Description all as per item No 54 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet15Amp independent board complete all as specified and as directed.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and as directed.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and as directed.

S & F in repair for Ceiling rose surface bakelite 65 mm x 50 mm three terminal AC 230 volts flush type complete all as specified and as directed.

M&L for switch socket combination multipin 5 and 16 Amps AC 230 volts flush type complete all as specified and as directed.

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and as directed.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and as directed.

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

Supply & fix in replacement of LED Security Light Luminaire 25 watt with 2500 or more lumen warm white, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and as directed.

chandan construction (BID ID -3318638)

M/S Modern builders (BID ID -3318912)

B G PANDEY AND BROTHERS (BID ID -3318774)

JAIDEV SINGH CHADHA (BID ID -3318299)

chandra builders (BID ID -3316749)

ANAMIKA CONSTRUCTION (BID ID -3318185)

Hemant Associate (BID ID -3322553)

ISHWAR CONSTRUCTION COMPANY (BID ID -3326681)