Patient Attendent Shed

Patient Attendent Shed CHC Sailana

Excavation work bymechanical means(Hydraulic excavator)/ manualmeans in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. 2.9.1 Ordinary rock

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.3 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M -7.5)

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 10.15.1 Hot finished welded type tubes

12.17 Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 12.17.2 2mm thick flat.

11.34 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) : 11.34.1 25 mm thick.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 With 40mm nominal size graded stone aggregate. 4.1.2.3 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M -7.5)

Point wiring (excluding metallic switch box & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in surface rigid Accessoris steel conduit ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting, etc. as required as per specification for :- 1.1 Light Point/Fan Points. b) Medium point

1.2 3 Pin 6 Amp socket outlet on Separate Board b) Medium point

1.6 Wiring for circuit wiring with PVC insulated cable FR with copper multi s trand conductor ISI marked in surface rigid steel conduit of ISI marked suitable size including painting etc. as required as per specification 4x2.5 Sq.mm

Supplying, Fixing and Testing of Compact Fluorescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification 29.23.6 20 Watt

30.1 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments. 30.1.2 Ceiling Fan Ornamental (5 star)-1200 mm Sweep

ABHISHEK SINGH SISODIYA