SPL REPAIR TO BLDG NO T137 ORS MD ACCN AT RIDGE AREA PROVN OF NEW SHED FOR DINING HALL FOR JCOS/OR NEAR BLDG NO NP19 AND PROVN OF 01XTOILET BLOCK AND 01XBATHROOM NEAR BLDG NO T84 WITH URINAL PORT WASH BASIN SINTEX TANK 1000 LTR UNDER GE SATWARI

Amount

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc.,all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises,all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints hacking for key and scapping down with water etc all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Material and labour for joint free ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 15mm thick screed bed in CM 1:4 as in floors etc complete,all as specified and directed.

All as per item above but as in verical surfaces skirting over a backing coat of CM 1:4, 10 mm thick complete etc,all as specified and as directed.

Material and labour for joint free ceramic coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including 15mm thick screed bed in CM 1:4 as in floors etc complete,all as specified and directed.

Material and labour Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified.

Material and labour Machine cut kota stone slab flooring 18-20 mm thick over and including cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 all as specifid and directed

Material and labour Machine cut kota stone slab 15-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.

Taking down cement plaster and decayed concrete of any description from sunken portion , repair with 15mm thick rendering on fair face of concrete surfaces in CM 1:3 and neru finish ,with water proofing compound ( As per manufacturer detail ) including junction portion, making proper slope towards out side, finished even and smooth with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate). (Note: Water proofing admixture measured and paid seprately)

(a) Applying 1st course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the plastered surface as in WC Sunken portion . (b) Applying 2nd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 2 mm thick weight not less than 3.0 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

Material and labour Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunken filling and mass concrete complete all as specified and directed by Engr-in-charge.

Material and labour 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

Supply and fixing in repair WC Orissa pattern white with integral foot rest 585x 445 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition)

Supply and fixing in repairs PVC valveless, symphonic action type,flushing cistern low level, white with inlet ball valve, float valve and handle including brackets 10 ltrs capacity.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Supply and fixing steel window/ventilator 1.25 mm thick Box type double shutter (primer coated) ERW hollow P section of size 60 mm x 25 mm double rebated comprises glazed skelton/ gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07. Note : Glass pan , wire mesh and grills will be measured and paid separately.

Supply and fixing MS framed work such as in gate grills, chawkatss, angle iron, plate etc and similar work including necessary pintle hinges, stops, welding, riveting, bolting , hold fast, sliding bolt and other necessary fitiings confirming to Fe 410-0 or Fe 310-0, all as directed

Material and labour for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Supply and fixing stainless steel mild steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanized wire staples complete all as directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in area n.exc 0.5 sqm each pane complete all as specified.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

Supply and fixing pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

Supply and fixing pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

Material and labour 35 mm thick 2nd class soft wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.

Supply and fixing 35mm thick 2nd class soft wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.

Supply and fixing Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement Supply and fixing in frame at site as per specification

Material and labour for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of new surface over 10cm width or girth complete all as directed by Engr-in-Charge

Supply and fixing Butt hinges, size 100mm, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium anodised, barrel tower bolts of extruded Section, size 150 mm long and fixed, complete all as specified and as directed by Engineer-In-Charge.

Aluminium handles, cast type, anodised, size 150 mm, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.

Supply and fixing in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

Supply and fixing in repair PTMT Grating Round 100 mm dia complete all as specified.

Supply and fixing 25mm outer dia stainless steel of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings with 50 mm dia and proportionate for part there off, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),complete all as specified and as directed by Engineer-In-Charge.

Material and labour complete removal of the existing roof treatment,( upto 2nd storey building) taken out membrane etc, including grabbing up of tree roots, roughing and preparation surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc all as specified and directed by Engr-in -Charge .

Material and labour complete for the following Roof treatment complete all as specified (a)Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over plastered surface . (b)Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180® C and applied @ 1.2 kg/sqm. (c)Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (d)(iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane.

Material and labour for 20 mm thick plaster in cm 1:3 finished fair and even on RCC roof slab ( upto 2nd storey building) incl mixing of IWPC ( Note :- IWPC shall be measured and paid for separately)

Dismantling/ disconnecting/ demolition of water storage tank of capacity exc 250 n exc 500 Ltrs and removing from site or refixing in position.

Supply and fixing rotational moulded polyethylene water storage tanks with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr incl making connection completed all as specified.

Supply and fixing in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified. ( ISI Marked)

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

Supply and fixing in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

Material & labour for Block board, grade 2 quality, interior grade, commercial type18/19 mm thick, kitche, cup board shutters/shelves etc , fixed to frame work with leaping (15 mm thick three side and 20mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.

Supply and fixing 100 mm size hasp and staple,safty type Aluminium anodised with mild steel hing pin including bolt to hinge plate and fixesd with screws.

Demolition of reinforced cement concrete of any discription ground to 2nd floors and removing unserviceable material exc 100 mtr as specified.

Material and labour for Reinforced cement concrete B1 1:2:4(20 mm graded aggregate),as in slabs supported on walls, beams and coloumns and the like slab laid in slops including nessary form work, all as specified and directed.

Supply and fixing mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.

Material and labour 18-20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar 1:4 Brushing neat cement slurry with 3.00 kg of cement per sq. metre

Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

Material and labour for brick work in cement mortar 1:6 using sub-class B bricks straight or curved on plan exc 6m mean radius all as specified.

Material and labour for brick work in cement mortar 1:6 using sub-class B bricks straight or curved on plan exc 6m mean radius ,except brick,all as specified.

Demolition of cement concrete (unreinforced) ground floor to 2nd floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.

Material and labour 75 mm thick cement concrete type C-2 (1:3:6) 20 mm graded stone agg in plinth protection or paving etc without using extra cement.

Material and labour for preparation of old decorated plastered /concrete surfaces of walls, rubbing with sand paper and applying two coats of oil emulsion distemper (white/off white) over & including 1-2mm thick smooth layer of wall care putty preparatory to distempering work on plastered surfaces complete all as specified.

Preparation of old/new plastered or unplastered surfaces of walls and applying two coats of cement based over and including one coat of primer, complete all as specified and as directed by Engineer-In-Charge.

Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/new plastered or unplastered surfaces of ceilings to achieve smooth and even surface and applying two coats of white washing, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge.

Supply and fixing sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 680mm x 535mm x 225 mm bowl size 610mm x 460mm x 2225mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Jainko, Model No- SSJ-3. & equivalent in Prayag,Nirali, Jayana.

Supply and fixing in repair Corner Wall Hung Basin with Fixing Accessories Set, Size : 400 x 400 including cuppling and pvc waste pipe complete all as specified.

Supply and fixing in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore.

Supply and fixing in repair 15mm CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

Supply and fixing in repairs 15 mm dia bib tap, long body cast brass Chromium plated fancy type screwed for iron pipes with wall flange and aerator

Supply and fixing in repairs fancy type CP stop angle valves, concealed type,cast copper alloy,chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed by Engineer-In-Charge.

Taking down steel tubing and connection incl cleaning for re-fixing or removal to store of 15 mm bore pipe complete all as specified.

All as per item above but 20 mm bore.

Supply and fixing 15 mm GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.

Ditto all as per item above but 20 mm dia.

Supply and fixing in repair PVC Waste pipe 32mm bore 1150mm length complete

Rendering 10 mm thick, on fair faces of brick or concrete surface ceilings, in cement mortar 1:3, rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-In-Charge.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

Supply and fixing in repairs PVC (SWR) pipes, 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repairs PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge.

PVC (SWR) vent cowl 110mm dia complete all as specified

PVC (SWR) junction single,(Single T) equal or unequal 110mm dia complete all as specified

Supply only Water proofing compound liquid.

Excavation in post holes ( or similar holes ) each n exc 0.50 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25 cm in any type of soil.

Material and labour PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in mass concrete in foundation).

Removing excavated materials in soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point all as specified and directed.

Supply and fixing structural steel work conforming to Fe-410-W (Gde E-250 Quality-A or B) or Fe-290 Gde E-165, as in staging for tank, roof trusses (framed), purlins, crane gantries, rails, vertical post and fastenings, heavy brackets framing ( I-Beam, tee, angle, channel, hollow pipe section, square hollow section or flat section) including distance pieces, cleats etc complete all as specified.

Supply and fixing Pre- painted galvatume aluminum zinc coating (AZ-150 Micron) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. Make:- Jindal ( JSW), TATA, SAIL, Indian Ispat

Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150 Micron) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified. Make:- Jindal ( JSW), TATA, SAIL, Indian Ispat

Material and labour for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

Material and labour for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

Material and labour for preparation of old decorated plastered /concrete/ brick surfaces of walls and applying one coat of cement based paint on old decorated surfaces including preparation.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size (30"x36"x10") fixed with steel fastners or steel screw complete Make:- Jainko, Model No.KRJ-4. and equivalent in Prayag, Nirali, Jayana.

Supply and fixing Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

Supply and fixing UPVC (SWR) floor trap 75mm with grating including jointiong to the waste pipe fixed in cement concrete type B1 (1:2:4), setting and jointing with solvent cement complete all as specified. Make - Astral/Supreme/ Finolex

Material and labour cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring etc and making good,cutting n.exc 10cm girth in brick walls.

Supply and fixing Pillar Cock Long Neck with 450mm Long Braided Hose fancy type complete all as specified.Make:- Jaguar, Cat No-CQT 23021B or equivalent in kohler/ Artize.

Supply and fixing Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make:- Jaquar, Cat No:- CQT-23347 or equivalent in kohler/ Artize.

Supply and fixing angular stop cock with wall flange , cast copper alloy, chromium plated fancy type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified. Make:- Jaquar, Cat No:-23059 or equivalent in kohler/ Artize.

Supply and fixing PTMT Soap Dish/Oval, complete all as specified. Make:- Prayag. Cat No- 195 or equivalent in Polytuf/ Jindal.

Supply and fixing PTMT Towel rail, 450 mm long, complete all as specified. Make:- Prayag. Cat No- 191 or equivalent in Polytuf/ Jindal.

Supply and fixing PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in kohler/ Artize/ Jaquar.

Supply and fixing PTMT Grating Round ( with waste hole) 125 mm dia complete all as specified. Make:- Prayag. Cat No- 113 or equivalent in Polytuf/ Jindal.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Plain cement concrete (1:2:4) Type-B0( 12.50mm graded crushed stone aggregate) Nominal mix in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided including necessary for work, complete all as specified and as directed by Engineer-in-charge

Cutting opening, through brickwall build in cement moetar for doors, window and other openings or enlarging existing opening. Converting window into door opening etc or cutting out defective brick work for under pinning including providing , fixing and removing shoring, cleaning and stacking bricks removing surplus bricks, hardcore, etc to store and rubbish not exc. 50m

Forming jambs etc to openings ( to foregoing item) including cutting, toothing and properly bonding into old work , also facing, jointing and matching the existing work, complete in cement mortar 1:4

Providing precast cement concrete type B-0 1:2:4 (12.5mm graded aggregate) louvers and jallies, 40mm thick (measured solid), including all moulding but excluding frame set in CM 1:4

Reinforced Cement Concrete 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate) Nominal mix as in slabs supported on walls, beams and columns in floors, roofs landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as directed by Engineer-in-charge

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) for rough finished surfaces of concrete complete all as specified and as directed by Engineer-in-charge

Material and labour for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,

TMT bars 6 to 8 mm mm dia and over cut to length, bent to shape required as in reinforcement, binding with m s wire (annealed) 0.90mm dia complete all as specified.

Ditto but 5mm dia and over upto and including 10mm dia as in stiruups, spacres and binders complete.

Cutting into existing manholes for connecting new drains, making good to pipe ( Internal dia 110 to 150mm ) rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required.

Supply and fixing, UPVC (SWR) , bends without access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding. 1.5 m wide and not exceeding. 1.5 m in depth and getting out in any type of soil.

Material and labour Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area.

Material and labour Treating the backfill in concact with foundation at the rate of 7.5 litres of emulsion per sqm of vertcal surface area.

Material and labour Treating the treating the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface area.

Material and labour Treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area.

Material and labour PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in mass concrete in foundation).

Brick work with subclass B old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6.

Returning filling incl spreading, leveling, watering and well ramming in layers n. exe 25 cm in each layers hard/dense soil all as specified.

Material and labour DPC with 40mm thick PCC type B0 (1:2:4) using 12.5 mm graded course aggregate with water proofing compound including necessary form work . Note: WPC Will be measured and paid seperately.

Rendering 5mm thick in cement mortar 1:3 finished even and smooth on cement concrete surfaces as in ceiling complete.

Filling under floors with soil obtained from excavation including watering, well ramming in layers not exc 25cm layers

Material and labour for preparing plastered surface and applying three coats of white wash on ceiling complete.

Material and labour Cement concrete 1:3:6 type C-2 75mm thick using 40mm graded stone aggregate as sub base to floor all as specified and as directed.

Material and labour for reinforced cement concrete type B 1, 1:2:4 mix (20 mm graded aggregate) as in slab supported on walls as for roof slabs, chajjas etc.

Material and labour for reinforced cement concrete type B 1, 1:2:4 mix (20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintel over 1.5m span etc.

Forrmwork to sides and soffits of suspended slab such as roof slab including supports, overhangings etc, for rough finished surfaces of concrete.

Material and labour for 25mm thick plain cement concrete 1:2:4 mix, Type B1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement complete all as specified and directed.

Material and labour hardcore of guage not exc 63mm, deposited spread, and levelled in layers n exc 15cm thick, watered and rolled/ammed to a true surface. Of broken stones or boulders

Supply and fixing WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor inclding 'P' or 'S' trap, connecting to trap and flush pipe compete all as specified.

Supply and fixing PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair under counter basin white colour with fixing accessories set, size: 560 x 470, Oval shape, including CP Waste Coupling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware.

Supply and fixing PVC connection 60cm long fitted with PTMT nut and washer on both ends and fixed complete all as specified and directed.

Supply and fixing fancy type CP Bib tap cast copper alloy with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete all a specified.

Supply and fixing angular stop cock with wall flange , cast copper alloy, chromium plated fancy type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified.

Supply and fixing Pillar cock long neck with aerator 15mm dia cast copper alloy fancy type complete all as specified.Make:- Essco, Cat No-SQT-508KN or equivalent in kohler/ Jaquar.

Supply and fixing Towel rail 600mm long of PTMT fixed with and including chromium plated screw and wooden/plastic cleats (minimum weight 190 gms)

Supply and fixing Towel ring of PTMT fixed with and including chromium plated screw and wooden/plastic cleats (minimum weight 90 gms)

Supply and fixing CP soap dish complete.

Supply and fixingL PVC (SWR) bends 75mm bore, any radius with oval acess door.

Supply and fixing PVC (SWR) bends 110mm bore, any radius with oval acess door.

Supply and fixingL PVC (SWR) bends 75mm bore,without oval acess door.

Supply and fixing PVC (SWR) bends 110mm bore ,without oval acess door.

Supply and fixing PVC(SWR) 110 mm branch piece, single (Single Y or T etc) equal or unequal with acess doors complete.

Supply and fixing PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as directed.

Supply and fixing PVC (SWR) vent cowl 110mm dia complete all as directed.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity, (cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Supply and fixing for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Supply and fixing Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel /Wood /Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified fixed with stainless steel wire staples.

Applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel and iron surfaces of any description , not other wise described over 10 cm width or girth including preparation of new surfaces.

Supply and fixing for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete.

Supply and fixing Factory made solid PVC Moulded door shutter 28 to 30 mm thick (Stiles) with particle board core with 2, 4 ,or 6 raised panel design with 2 mm thick moulded Prelam PVC sheet on the front face & 2 mm Prelam PVC sheet on back face, to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the framme at site as per specification and drawing, complete all as specified and as directed by Engr-in-Charge.

Supply and fixing 100mm long butt hinges extruded alumn alloy with galvanised mild steel hinge pin, anodized and fixed complete all specified.

Supply and fixing extrude aluminium alloy handles, fabricated type, anodized size of 125 mm long complete.

Supply and fixing for Al anodised barrel tower bolts of extruded section and fixed of size 150mm complete.

Supply and fixing 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete.

Material and labour 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection finished even and smooth without using extra cement complete all as directed.

Material and labour 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed bed in CM 1:4 as directed by Engr-in-charge.

Material and labour Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Material and labour cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.

Supply and fixing Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/ Hindware.

Supply and fixing Urinal partition fixing accessories complete all as specified. Make:- Cera, Cat No:- S4090101 or equivalent in Jaquar/kohler/ Artize.

Material and labour for cement concrete 1:3:6 Type C-2 using 40mm graded crushed stone aggregate to the bed of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore complete as all specified and directed by Engineer-in-Charge.

Material and labour 150 mm bore/Inner Dia. Double wall corrugated HDPE Pipes (S4 ) with integral socket and necessary fittings , laid in trenches jointed complete all as specified Make : Supreme, Finolex or equivalete.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, water troughs and the like including slightly rounded chamfered angle and throughting etc all as specified and directed by Engineer-in-Charge.

Material and labour Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1: 2: 4 type B-1 smooth finished, and reforming benching as required.

Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down of unsv MCB DB SPN /TPN along with MCB's

Material and labour for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised flush boxes of suitable size including white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

(a) One light/fan/bell point controlled by one, one way switch 6 Amp complete

(b) One 3 pin socket outlet 6 amp independent

(c) One 3 pin socket outlet 6 amp same board

All as per srl item No 179 above but for one 2 way light point controlled by two 2 way switch

All as per srl item No 179 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fix modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts.

Supply and fix musical door bell, AC 230 Volts single phase.

Supply and fix modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.

Supply and fix ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fix LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.

Supply and fix of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .

Supply and fix LED lamp suitable for B22 holder of capacity 7 Watt.

Supply and fix Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing.

Supply and fix Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar,Earth Bar ,neutral Bar Door Earthing.

Supply and fix MCB SPN complete 32 Amp,240 volts with rupturing capacity 10 KA 'C' series, complete all as specified and directed.

Supply and fix MCB Single pole 6 to 32 Amp 240 volts with rupturing capacity 10 KA 'C' series, complete all as specified and directed

Supply and fix sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fix energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells or equivalant in Crompton/ Philips/ Wipro

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts complete all as specified and directed.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

Taking down and refixing of Exhaust fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

Taking down carefully after disconnecting electrical & water supply connections of storage type electric water heaters (Geysers) of capacity 25 liters of any make/type and refixing on its original/New position and reconnecting electric and water supply connections including replacement of nuts, bolts, washers, fastners etc and testing complete all as directed.

Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with fixing by anchor fasner of suitable size and hook/clamp all as directed by engr in charge.

Supply and fix Vertical Distribution Board (TP&N) 6 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Makes: Legrand/IndoAsian Optipro/Schnider Note:- (i) MCCBs FP & SP shall be measured paid separately (ii) MCB & DB shall have the same make.

Supply and fix 4 Pole MCCB 125 Amp, 415 Volts with rupturing capacity 16 KA , complete all as specified and directed

Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 m sweep with, blades, and frame and louvers and including making of holes in wall, floor etc all as directed by Engr in charge.

Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments complete all as specified.

Tubes, light grade,galvanised,40 mm dia, fixed complete to wall,ceiling or laid in floors with all fitting all as specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing LED light fitting 10W IP65 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

Supplying and laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench all as specified.

Supplying and laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick after laying the cable in trench all as specified.

Material and labour for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

M/S VIJAY KUMAR SHARMA

CELMAC REGD

MOHINDRA ENTERPRISES

M/S STAR CONSTRUCTIONS

Azurite Engineering

M/S ANIL MAHAJAN

M/S Raman Construction Co.

M/S PARAMJEET SINGH