Certain repair and recanning to various types of chairs (wooden/steel) and polishing to wooden furniture at GE (A) Suratgarh at Suratgarh Mil Stn

Amount

Taking out carefully following old unserviceable parts of Table Dinning 6 Persons and Supply & fixing new parts made out of 1st class shisham hard wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-239, 273 & FD/MAP/09 (a) Leg

(b) Front rail

(c) Side rail

(d) Top of size 1500 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table 900 x 600mm with Drawer and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-223, 224, 283 & 284 (a) Leg

(b) Long rail

(c) Short rail

(d) Drawer made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated particle board ISI marked at sides

(e) Stiffener long and short

(f) Table Top of size 900 x 600mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Dinning 8 Persons and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-239, FD-273 & FD/MAP/09 (a) Leg

(b) Front rail

(c) side rail

(d) Top of size 1800 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table 900 x 900 x 760mm and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD-291 (a) Leg

(b) Rail

(c) Top of size 900 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Conference / Library (2135 x 1065 x 19mm) and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD-08, FD-287 (M) (a) Leg

(b) Side short rail

(c) Front long rail

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking down old unserviceable parts from TEAPOY and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-278 & FD-382 (a) Long rail

(b) Short rail

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking down old unserviceable parts from TEAPOY VERANDAH and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-383 (a) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(b) M&L for preparation of old painted steel surfaces of teapoy verandah and painting with one coat of synthetic enamel paint white shade complete all as directed by Engineer-in-Charge.

Taking down old unserviceable parts from PEG TABLE and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-236, FD-255, FD-277 & FD-384 (a) Long rail

(b) Short rail

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking down old unserviceable parts from SIDE BOARD and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge Drg No :- FD-241 (a) Drawer made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides

(b) Side made from 18mm thick prelaminated particle board ISI marked

(c) Back made out of 6mm thick ply wood commercial face both sides ISI marked

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking down old unserviceable parts from TABLE DRESSING GENTS and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-230 & FD-379 (a) Mirror 5.5mm thick with Shisham wood frame. Back of mirror frame shall be of 6mm thick Ply wood commercial BWR ISI marked all as per drg including key plates Make - Saint Gobain / Modiguard / Atul

(b) Back of mirror frame shall be of 6mm thick Ply wood commercial face both side BWR ISI marked all as per drg including key plates Make of ply :- Centure Ply wood / Kit Ply / Sharda Plywood / National Plywood

(c) Top made out of 12mm thick prelaminated particle board, ISI marked Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(d) Mirror frame made out of 1st class hard wood (Shisham) duly seasoned

(e) Back made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

Taking down old unserviceable parts from TABLE CARD and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-91, FD-352 (a) Top (900 x 900 x 19mm) made out of 12mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround including baize green cloth complete all as per drawings. Note :- Baize green cloth should not less then the rate of Rs 275/- Per RM.

(b) Long Rail

(c) Legs

(d) Drawer made out of 6mm thick plywood commercial face both side ISI marked at bottom & 12mm thick prelaminated particle board ISI marked at sides

Taking down old unserviceable parts from TABLE DRESSING LADIES and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-251 & FD-376 (a) Mirror 5.5mm thick with Shisham wood frame. Back of mirror frame shall be of 6mm thick Ply wood commercial BWR ISI marked all as per drg Make - Saint Gobain / Modiguard / Atul

(b) Back of mirror frame shall be of 6mm thick Ply wood commercial face both sides BWR ISI marked all as per drg Make of ply :- Century Ply wood / Kit Ply / Sharda Plywood / National Plywood

(c) Mirror frame made out of 1st class hard wood (Shisham) duly seasoned

(d) Drawer made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated particle board ISI marked at sides

(e) Back made out of 12mm thick commercial ply commercial face both side

(f) Top made out of 12mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

Taking down old unserviceable parts from HAT STAND and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-235, FD-251 & FD-361 (a) Mirror 5.5mm thick with Shisham wood frame. Back of mirror frame shall be of Ply wood commercial BWR 6mm thick all as per drg Make - Saint Gobain / Modiguard / Atul

(b) Front 4mm thick one side teak face ply and another side commercial face plywood ISI marked

(c) Back made out of 4mm thick Ply wood commercial face both side ISI marked

(d) Beading 35mm wide, 6mm thick alround the hat stand made out of teak wood

(e) Copper oxide steel pegs 120mm long

Taking down old unserviceable parts from TABLE BED SIDE and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-248 & FD-276 (a) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(b) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(c) Shelf made out of 12mm thick ply wood commercial face both side ISI marked

(d) Back ply 6mm thick ply wood commercial face both side ISI marked

Taking down old unserviceable parts from Table Centre and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-29, FD-231, FD-232 & FD-274 (a) Long rail

(b) Short rail

(d) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

Taking down old unserviceable parts from ALMIRAH MESS and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-93 (a) Top made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(b) Shelf (1025 x 420 x 19mm) made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet

(c) Shelf (1025 x 270 x 19mm) made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet

(d) Back ply (1065 x 1570) 10mm thick ply wood commercial face both side ISI marked

(e) Shutter made out of 19mm thick block board ISI marked covered with 1mm thick laminated sheet complete all as per drawings.

(f) Aluminium anodized handle 100mm long

(g) Aluminium anodized hasp & staple 75mm long

S&F in replacement Knob of CP brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by the Engineer-in-Charge

M&L for 5mm thick glass white / brown colour after taking out unserviceable glass from book case, bar counter, almirah mess utensils, book rack with sliding glass, mirror shelf, almirah glazed etc complete all as specified and directed by the Engineer-in-Charge

M&L for replacement of mirror of dressing mirror gents complete all as specified and directed by the Engineer-in-Charge Drg No :- FD/E6/MAP/16 Make :- Modiguard / Atul / Saint Gobin

Taking down old unserviceable parts from SOFA SET 4 SEATER and supply and fixing of new parts as specified in drg duly seasoned shisham wood, free of knots.Sizes of all members shall be as per drawing and as directed by Engr-in-charge. (a) 100mm thick foam rubber cushion of size 530 x 560mm, 40 density duly covered with Tapestry cloth matching to seat Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(b) 100mm thick foam rubber cushion of size 530 x 560mm, 32 density duly covered with Tapestry cloth matching to back Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(c) Arm made out of 1st class hardwood (Shisham wood)

(d) Leg made out of 1st class hardwood (Shisham wood)

(e) Front rail made out of 1st class hardwood (Shisham wood)

Taking down old unserviceable parts from SOFA SET 5 SEATER and supply and fixing of new parts as specified in drg duly seasoned shisham wood, free of knots.Sizes of all members shall be as per drawing and as directed by Engr-in-charge. (a) 100mm thick foam rubber cushion of size 530 x 560mm, 40 density duly covered with Tapestry cloth matching to seat Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(b) 100mm thick foam rubber cushion of size 530 x 560mm, 32 density duly covered with Tapestry cloth matching to back Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(c) Arm made out of 1st class hardwood (Shisham wood)

(d) Leg made out of 1st class hardwood (Shisham wood)

(e) Front rail made out of 1st class hardwood (Shisham wood)

Taking down old unserviceable parts from TABLE WRITING and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No. :- FD-275 (a) Leg

(b) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(c) Drawer made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated particle board ISI marked at sides

(d) Shutter of cupboard made from 18mm thick prelaminated particle board ISI marked

(e) Side and back of cupboard made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and tighening the frame with wooden corner complete all as per drawings.

Material and labour for french polishing to under mentioned items of furniture after preparation by removing old worn out polish, scratching/rubbing with sand paper, filling putty wherever required and making the surfaces smooth for polishing and applying two coats of french polish complete all as specified and as approved by the Engr-in-charge (a) Chair dinning PVC Seat Drg No FD/E6/MAP/05R

(b) Table 900 x 600 x 760 mm without/with drawer Drg No. :- FD-223, FD-224, FD-283 & FD-284

(c) Table bed side Drg No. :- FD-248 & FD-276

(d) Table dining for 6 / 8 pers Drg No. :- FD-30, 239, 273 & 376

(e) Table dressing gents with mirror Drg No. :- FD-31, 230 & 379

(f) Table dressing ladies with mirror Drg No. :- FD-32, 251 & 378

(g) Teapoy Drg No :- FD-278 & 382

(h) Table peg Drg No. :- FD-25, 277, 236 & 384

(j) Side board Drg No :- FD-26, 241, 371 & 372

(k) Table writing Drg No. :- FD-33, 249 & 275

(l) Table 900 x 900 x 760mm Drg No :- FD-291

(m) Table Drafts man Drg No :- FD-04 (M)

(n) Table library / Conference Drg No FD-8 (M) & FD-287 (M)

(o) Hat Stand Drg No :- 233 & 361

(p) Table Centre Drg No :- FD-235

(q) Book case Drg No :-FD-45 (M) & FD-237

(r) Table Card Drg No :- FD-91 & FD-352

(s) Almirah Mess Utensils Drg No :- FD-93

(t) Sofa set 4 seater (Wooden) Applicable Drg No FD-258, FD-281 & FD-373

(t) Sofa set 5 seater (Wooden) Applicable Drg No FD-258, FD-281 & FD-373

(u) Chair Dinning Cushioned Drg No :- FD/E6/MAP/10R

(v) Notice board (2440mmx1220mm) Applicable Drg No FD-99 (M)

(w) Table 1200 x 900 x 760mm Drg No FD/E6/MAP II/03

(x) Chair wooden bottom without Arms Drg No FD-56 & FD-285

(y) Chair dining FD-16, FD-228 & FD-279

(z) Chair Writing Drg No FD-250 & FD-280

(aa) Chair Easy with french polish Drg No FD-201 & FD-229

(ab) Chair dinning long back Drg No FD-357

(ac) Chair easy cushioned Drg No FD-357

Taking down old unserviceable parts from BIN LINEN MULTIPURPOSE MAP and supply and fixing of new parts of sizes and shape of all members as per drawing and as directed by Engr-in-charge. Drg No :- FD/E6/MAP/09 (a) Shutter of made from 18mm thick prelaminated particle board ISI marked with piano type hinges as per existing pattern

(b) Drawer made out of 18mm thick prelaminated particle board ISI marked

(c) Ply top made of 12mm thick plywood BWR ISI marked of size 1200mm x 450mm

(d) Side made from 18mm thick prelaminated particle board ISI marked

(e) Back made out of 12mm thick ply wood commercial face both sides ISI marked

Taking down old unserviceable parts from Notice Board (900x600mm) and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-117 (M) (a) 6mm thick plywood ISI marked & soft board covered with baize green cloth complete all as per drawings. Note :- Baize green cloth should not less then the rate of Rs 280/- Per RM.

(b) 3mm thick glass complete all as per drawings.

Taking down old unserviceable parts from Notice Board (2440x1220mm) and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-117 (M) (a) 6mm thick plywood ISI marked & soft board covered with baize green cloth complete all as per drawings. Note :- Baize green cloth should not less then the rate of Rs 280/- Per RM.

(b) 3mm thick glass complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Dinning 1200 x 900 x 760mm and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD/273 & FD/MAP-II / 03 (a) Leg

(b) Top long rail.

(c) Top short rail

(d) Top of size 1200 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 6mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

M&L for removing existing unserviceable Cane and recanning with 2mm wide half round plastic cane except that of border which shall be 3mm flat superior quality cream / white colour and weaving of approved quality as per Godrej pattern complete all as specified and directed by Engineer-in-Charge. Make of Cane :- Shah & Shah / M/S Premier / Indian Plastic Drg No FD-03 (M) / FD-279 / FD-229, FD-280 and as applicable

CHAIR VARANDAH Drg No :- FD-19, FD-256 & FD-359 (a) M&L for preparation of broken ends and 3mm thick strip gas welding the broken ends properly to chair including preparation of surface and two coat of synthetic enamel paint over a coat of rex oxide on joint

(b) M&L for preparation of old painted surfaces of chair and painting with one coat of synthetic enamel paint white shade complete all as directed by Engineer-in-Charge.

(c) Removal of unserviceable plastic cane from chair and M&L for Reweaving seat and back with 4mm wide flat plastic cane in matt pattern complete all as specified and directed by Engr-In-Charge. Make of Cane :- Shah & Shah / M/S Premier / Indian Plastic

(d) Removal of old unserbiceable PVC shoe of Leg and S&F new PVC shoe of best approved quality of white shade

Taking out carefully following old unserviceable parts of Chair Wooden Bottom and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-225 & 285 (a) Front leg

(b) Rear leg

(c) Back rest batten

(d) Side / front / rear rail

(e) Stiffner

(f) Seat made out of 6mm thick BWR Grade ply fixed with 20mm long screws

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR DINNING after removal of old unserviceable parts :- Drg No :- FD-16, FD-279 (a) Front leg

(b) Rear leg

(c) Back Rest batten

(d) Stiffener

(e) Side / Front / Rear Rails

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR EASY after removal of old unserviceable parts :- Drg No :- FD-201, FD-229 (a) Front leg

(b) Rear leg

(c) Arm rest

(d) Rail of seat frame

(e) Rail of back frame

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR EASY CUSHIONED after removal of old unserviceable parts :- Drg No :- FD-358 (a) Front leg

(b) Rear leg

(c) Arm rest

(d) Rail of seat frame

(e) Rail of back frame

(f) 75mm thick foam cushion of 32 density duly covered with Tapestry cloth matching to seat & back complete all as specified and directed by the Engineer-in-Charge MAKE : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

Supply and fixing following parts made out of 1st class hardwood shisham as per drawing to CHAIR DINNING PVC SEAT after removal of old unserviceable parts :- Drg No :- FD/E6/MAP/05R (a) PVC seat

(b) Front leg

(c) Rear leg

(d) Stiffner

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR WRITING after removal of old unserviceable parts :- Drg No :- FD-250 & FD-280 (a) Front leg

(b) Rear leg

(c) Back Rest batten

(d) Side / Front / Rear Rail

(e) Stiffner

(f) Arms

CHAIR SCHOOL WITH HAND BOARD Drg No :- FD/E6/MAP/ 05 & FD-260 (a) Removing the existing old unserviceable seat from chair and S&F new seat of chair shall be of poly propylene CO polymer seat weight 1.20 Kg Moulded to shape and size all as shown on drawing. Seat shall be fixed to frame with suitable bolts & nuts as per drg and as directed by Engr-in-charge.

(b) Removing old unserviceable writing board and supply and fiixing of new writing board made of 18mm thick pre laminated particle board one side teak face. PVC edging screwed to 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame. Plastic shoes shall be provided at the bottom of legs and chair shall be painted with one coat of synthetic enamel paint and wooden surfaces shall be french polished.

(c) Welding to broken / craked joints of chair school by Gas welding as per existing design rest complete all as specified and directed by the Engineer-in-Charge

Taking down old unserviceable parts from CHAIR DINNING LONG BACK and supply fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots sizes of all members shall be as per drawing and as directed by Engr-in-charge Drg No :- FD-357 (a) Front legs

(b) Rear legs

(c) Stiffner

(d) Front / side / back rail

(e) 50mm thick foam cushion of size, 32 density duly covered with Tapestry cloth matching to seat & back complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

Supply and fixing following parts made out of 1st class hard wood (Shisham) as per drawing to STOOL DRESSING CB / STOOL after removal of old unserviceable parts :- Drg No :- FD- 282, FD/E-6/MAP/14 & TP (a) Legs

(b) Front Rail

(c) Side Rail

(d) 50mm thick foam cushion of 32 density duly covered with Tapestry cloth complete all as specified and directed by the Engineer-in-Charge MAKE : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre.

(e) M&L for polishing of stool dressing CB / Stool with french polish on exposed surface of chair after preparation of old polished surface

S&F triangular shape corners of 100mm x 100mm x 25mm thick made out of 1st class hard wood shisham in all types of wooden chairs complete all as specified and directed by the Engineer-in-Charge Drg No :- FD-03 (M), FD-279, FD-229, FD-280

Supply and fixing following parts made out of 1st class hard wood (Shisham) as per drawing to CHAIR DINNING MAP after removal of old unserviceable parts :- Drg No :- FD/MAP-II/04 (a) Front Leg

(b) Rear leg

(c) Side / Front / Rear Rails

(d) Stiffener

(e) 75mm thick foam cushion of 32 density duly covered with Tapestry cloth matching to seat & back complete all as specified and directed by the Engineer-in-Charge MAKE : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre ------------------------------------------------------------------------ Note :- A sum of Rs. 55817/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 25 & 26 (Schedule of Credit) of Tender documents.

M/S Dharam Chand Lal Chand Jain

Vinayak Distributors

JAIN TRADERS

Khatri Trunk Factory

SK INDUSTRIES