Improvement of Black Spot of Mahura Kala situated at Sultanpur Mahura Kala Road in Lucknow District -Signage Work

Providing and laying of hot applied thermoplastic compound 2.5mm. Thick including reflectorising glass beads @ 125 gms per sqm area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes. (Excluding GST)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated/Transverse bar) Providing and laying of hot applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 15 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. (Excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per 2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium she mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the g means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 6 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tes certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and lu shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resi years outdoor weathering and its having passed these tests shall be obtain International/Government Laboratory Institute by the manufacturer of the sheeting and in certificate is obtained from international condition, it should also be obtained from Indian condi 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate cont ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from taboratory in India can be accepted provisionally. Ishould be as per MORTH specification No-801.3.7 Proof of the sa of govemment report shall be uploaded while quoting tender 60 cm circular with definition plate (20cm X 60cm) (Excluding GST)

60 cm equilateral triangle with definition plate (20cm X 60cm) (Excluding GST)

60 mm x 45 mm rectangular with diffinitation plate (20cm X 60cm) (Excluding GST)

30X90 cm (Left/Right) Object Hazard (Excluding GST)

45x90 cm two way Object Hazard (Excluding GST)

Direction and place Identification signs up to 0.90 sqm size Board 8.5) Providing & erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility. liner removal, adhesion, impact resistance, specular gloss and fungus rest of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals & borders etc should be as per MoRTH specification No-801.3.7 Sheet fixed over aluminium sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm., below ground level as per approved drawing, complete. (Excluding GST)

Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Impact Polystyrene) or Acrylonitrile Butadien Styrene (ABS) or Any other suitable material approved by the Engineer.The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280.The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face.Lenses shall be moulded of methyl methecrylate conforming to ASTM D788 or equivalent.transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge.As per SOR ch-26 SI no.-5 RPM with Shank (Excluding GST)

The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white , red , yellow , green or blue or combination as directed by the Engineer . Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress.The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm . It shall have super bright LEDs so as to e of - 400C to +550C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. (Excluding GST)

Aluminum-backed flexible prismatic sheeting shall be made of yellow colored flexible prismatic sheeting with non-metallic prismatic lens formed in a transparent, synthetic resin as retro reflective elements. This flexible prismatic sheeting shall have black and yellow stripes with aluminum backed flexible prismatic Type VI sheeting conforming to ASTM: D4956 . specifications and standards of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. Tformat. Width of object marker shall be 300 mm. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. (Excluding GST)