SPECIAL REPAIR TO BLDG NO. 191 AT CME

Amount

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using porpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and as directed.

S&F PVC Solid Door Frame of Size 50X47mm made out of 5.0mm Plain Colour PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacture’s Instructions complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Draw-ings, complete all as specified and as directed.

S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put to gether with glue pinned at joints supplied and fixed

M&L preparing surfaces of wood and wood based and treating ends of posts, back of chowkats. Etc area exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed.

S & F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified.

S & F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified.

S & F Mild Steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminious paint and sanded, complete all as specified.

M & L for Preparing surface of iron and treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc 0.1 Sqm each complete all as specified and directed.

M & L for cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified.

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified.

S & F 150mm long Aluminium handles, cast type anodised

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete.

S&F 300mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for Preparing New Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.

S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixing etc, complete all as specified and as directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar complete all as specified and directed.

M&L for pre-cast PCC block masonary type C-1, 1:3:6 exc 10 cm width and set in CM 1:4 complete all as specified and directed.

M&L 15mm thick cement plastering on stone masonry surfaces in CM (1:6) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 including taking down plastering of any description complete all as specified.

M&L 5mm thick rendering on ceiling surface in CM 1:3 including taking down existing plaster complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces on walls and applying two coats of oil bound distemper over a coat of primer inluding chalk complete all as specified and directed.

All as per item No 26 above but three coats of white wash on ceiling complete all as specified and directed.

M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts including filling of complete surfaces with 3mm POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed

M & L for complete removal of existing treatment from walls, filling the holes/cavities and platering the surface required, cleaning and preparation of the surfaces and applying two coats of exterior emulsion paint 100% acrylic (Apex) over a coat of primers as per manufactured instruction complete all specified and directed. Note : The rate shall be quotted by the contractor including scafolding to carry out the work for height more than 10.00 mtrs.

Dismantling Wrought Iron or Mild Steel Work, viz. Mild Steel Flat Iron, Mild Steel Bars, Bends, Straps and Similar Work including Mild Steel Bolts, Nuts, etc., fixing to RCC Fencing Posts, Struts, etc. complete all as specified and as directed.

S & F for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-290 Gde E- 165 all as specified and directed.

M&L preparing New Steel and Iron Surfaces of any descriptions, over 100mm in width or girth and applying Two Coats of Synthetic Enamel Paint over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

Demolition of cement Concrete in flooring and pavings incl 15cm thick below or above ground level including removal of debries up to 100M complete all as specified and directed

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in sub base25 mm thick in floors all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeing 0.11 sqm but not exceeding 0.18 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match (Size of tile 400mmx400mm and thickness not exceeding 10mm joint free tiles) over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for coloured glazed ceramic tiles 350mmx250mm x7mm/450mmx350mmx7mm thick & boarder in vertical surfaces such as skirting , dado etc set & jointed in neat cement slurry & pointed in coloured cement to match fixed including over backing coat 10mm thick in CM 1:4 complete all as specified and directed

S & F Bib cock with wall flange complete as specified and directed by Engr-in-Charge. (make - Jaquar )

S & F in Angular stop cock with wall flange of 15mm dia capastan head complete as specified and directed by Engr-in-Charge. (make - Jaquar )

S & F in repair Hand shower(Health Faucet) with 1 meter long PVC tube & wall hock (Make - Jaquar )

S & F in repair Soap dispenser with glass bottle of make Jaquar

S & F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. make Jaquar

S & F in repair Toilet paper roll holder with flap complete as specified and directed by Engr-in-Charge. make Jaquar

S & F in repair Glass Shelf 600mm long complete as specified and directed by Engr-in-Charge. make Jaquar

S & F in repair Single Towel Rail 600mm long complete as specified and directed by Engr-in-Charge.make Jaquar

S & F in repair Towel Ring complete as specified and directed by Engr-in-Charge.make Jaquar

S & F in repair counter top wash basin size 545 x 545 x180 mm complete as specified and directed by Engr-in-Charge. Make Jaquar

S & F in repair center hole basin mixer with popup waste system with 450 mm with all connecting accessories complete all as specified and directed by Engineer-in- charge complete as specified and directed by Engr-in-Charge. Make: Jaquar

S & F in repair Bib cock 2 in one complete as specified and directed by Engr-in-Charge. Make : Jaquar

M&L for coupled closet (Clover) snow white, size-360x640x685mm, make Jaquar including P or S along with cistern dual flush complete set with soft close plastic seat cover complete as specified and directed including taking down old wash down water closed pan of any description any size Make- Jaquar, code SLS-WHT-6851P180PP

S & F cast iron floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75mm fixed in repairs complete complete as specified and directed

Dismantling CI/AC/PVC (SWR) pipes of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc.

S & F in 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with and including clamps complete as specified and directed

S & F in repairs 110 mm dia PVC (SWR) bends any radius, provided with access door complete as specified and directed

S & F in PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete as specified and directed

S & F in PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S&F in 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete as specified and directed by Engr-in-Charge.

S & F in 75 mm dia PVC (SWR) bends any radius provided with access door complete as specified and directed by Engr-in-Charge.

S & F in PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete as specified and directed by Engr-in-Charge.

S & F in PVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete as specified and directed

S & F in 15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete all as specified and directed.

S & F in 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete all as specified and directed complete as specified and directed by Engr-in-Charge.

S & F in repairs bathroom cabinet mirror of hard thermosetting plastic of size 400x500mm, fitted with superior quality distortion free 4mm thick mirror complete as specified and directed by Engr-in-Charge. . Make Prayag Cat No. 554

M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and directed complete as specified and directed

M & L 25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting of hole if required complete as specified and directed by Engr-in-Charge.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for half staff ceramic urinal pastel coloured of size 720x485x310mm (Make – Hindware Cat No 60006 or equivalent approved make indicated in list of makes in tender) including Urinal toughned glass (including grinding, polishing, rounding/moulding/chamfering edges) , brass cp bottle trap , electric operated auto censor flushing arrangements (Make Hinduware Cat No.500963 or equivalent approved make indicated in list of makes in tender) complete including taking down old u/s one complete all as specified and directed

M&L Rotational moulded polythylene water storage tanks of capacity 1000 ltrs (Cylinderical vertical with closed top) hoisted and fixed in position all as specified and in SSR Part-I, including 20mm dia ball brass valves , high pressure with polythene float and flynut complete screwed for iron pipe and brass ferrule including Dismantling water tanks and removing to store complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm gde agg) as in foundation and mass concrete complete as specified and directed by Engr-in-Charge

M&L machine cut kota stone slab as in flooring 20-25 mm thick over and including 15mm thick (avg thickness) cement screed in CM 1:6 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting , waste, rubbing and polishing(granite finish) etc complete all as specified and directed.

M&L machine cut kota stone slab as in skirting 20-25mm thick in riser of steps, skirting, dado and pillar inclu 15mm thick (avg thickness) rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polishing(granite finish) etc complete all as specified and directed.

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anidised door frame section 101.60x44.45x1.93 mm fixed as per specified (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per specified. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per specified. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as specified. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal (f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass/frosted (Colour) 5mm thick Make : Saint gobain midgaurd or wiremess stenless steel (k) Floor spring , Make Sandu Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge.

S & F three track sliding window with two or more shutter with 4 mm thick plane glass or Toughen glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make including taking down existing old window with frame of any description complete all as specified and directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844

S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old ventilator with frame of any description complete all as sspecified and directed. (a) SP 20048 (b) Glazing clips 19352

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc.

M&L for point wiring for ligh/fan with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.00 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch in and includinding taking old unserviceable point wiring. & Making good to disturbed surface of wall etc

One light point controlled by one switch 5 Amp

One fan point controlled by one switch and regulator

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin 5 Amps on the same board

All as per Item No 77 above, but with stranded copper conductor 2.5 Sq. mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S&F ceiling rose, surface Bakelite suitable for 3 pin 230 volt 50 Hz AC supply complete all as specified

S&F switch piano; flush type, single pole, one way, and 6 Amp, 230 volt complete all as specified.

S&F switch piano; flush type, single pole, one way, and 15 Amp, 230 volt complete all as specified.

S&F socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified.

S&F socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

Taking down ceiling/Exhaust Fans any type/ sweep 230 V AC and refixing after cleaning and making connection complete

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, 50 Hz AC supply

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.

Supply and fix lamp holder PVC insulated body with back plate suitable for batten complete for 230 volt 50 Hz AC supply

Supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaries, high efficiency diffuser for soft glare fee light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make : Cat Part No ENDURALINEARNEOBS20W LED865SPCWH of Havells or equivalent model in Wipro/CG/Bajaj.

Supply & fixing LED luminaires panel lighting size 2'x2' capacity 36 Watt, Urtra modern disigned architectural LED Luminaire which provides soft-light and glare symmetrical illumination suitable for grid ceiling and including taking down old one all as specified & directed by Engr-in-Charge. Make- Havells Cat Part No VENUSNEOHE2X2PLR36WLED8XXS or equivalent make in CG/Bajaj

Supply and fix Security light LED fittings capacity 45 Watts, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 protection and impact resistance of IK07 and necessary fixing arrengements i.e pipe mounting GI bracket bent in shape not exceeding 1.5 mtr in length made out of 40 mm dia GI pipe complete all as specified and directed by Engineer-in-charge. (Make- Havells item description ENDURAPEARLNEOSL45WLED757PASYTOPC or same type in all respect of Wipro/Bajaj)

Supply and fix heavy duty exhaust fan AC single phase 230/ 240 volts heavy duty of size 300 mm sweep, 1400 rpm, with louvers and all fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

Supply and fixing wall mounting fan (air circulator) single phase oscillating type 450mm sweep 230 volts complete.

S&F on PVC square Blocks angle/batten holder D type with PVC insulated body complete incl taking down old unserviceable one..

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 06 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 6 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC conduit will be measured as one unit

S&F Sub main wiring with approved colour coding as per IS with Two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing into PVC conduit including PVC insulated 4 Sqmm (nominal area) stranded copper conductor earth wire complete. NOTE : Two runs of 4 sqmm cable, one run of 4 sqmm earth cable and one run of PVC conduit will be measured as one unit

Supply and fix VTPN MCCB 100A DB-double door with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 54 protection complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed by Engineer-in-charge. Make - Indoasian /Schneider/Siemens] for the 4 way TPN, 415 Volts.

Supply & fixing of MCCB Three pole and neutral 415V 100 Amps 26 kA incl taking down old unserviceable one. Make - Indoasian /Schneider/Siemens

Supply & fix DB 8 way SPN with 200 amps rated bus bar, double door including wooden box suitable size. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 9KA C series. Make - Indoasian /Schneider/Siemens

Supply and fixing of MCB Single pole and neutral rating capacity 40 to 63 Amp, 240 V breaking capacity 9KA C series. Make - Indoasian /Schneider/Siemens

S&F Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cable etc for repairs / laying cables etc and getting out in following type of strata complete all as specified and as directed by the Engineer-in-Charge.

Soft/Loose soil

Hard/ Dense soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer-in-Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying LT UG cables and making good with cement concrete 1:3:6 type C 1 (using 20 mm graded stone aggregate)

Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured , electric power cables (heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 3.5 core 25 Sqmm in and including taking out old one all as specified and directed.

Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified.

Supplying and laying GI tubing light grade of size 40mm dia bore for encasing cables for mechanical protection , laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed by Engr-in-charge.

M/S JAYCONSTRUCTION CO

Mukund Engineers and Contractors