REPAIRS/MAINT OF JOINERY AND CONNECTED WORK, REPAIRS/MAINT OF BLDG ROOFS INCLUDING CLEANING OF ROOF TREATMENT, REPAIRS/MAINT OF SERVICE WATER TANK INCLUDING CLEANING OF SERVICE WATER TANK, REPAIR/MAINT INCLUDING REPLACEMENT OF DAMAGED FLOOR AND WALL

Amount

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.

Taking down shutter of any description n. exc. 1 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.

S&F 125X60mm size factory madepressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 105X60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M&L for PCC type B0 (1:2:4) (using 12.5mm graded stone aggregate) as in door frame filling, bed plate, fixing of hold fast block etc, complete all as specified and directed.

S&F 2nd class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood board core free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F factory made solid wire gauzed i.e. panel will be of wire gauze PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail; i.e. panel will be of wire gauge. The wire gauge shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed.

S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc., complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

S&F 2nd class hard wood 15mm thick boarding clean sawn with butt joints fixed with nails in any positions and shelves of built-in cupboards including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc., complete all as specified and directed.

Taking down shutter of any description n.exc 1 Sqm each and refixing in same opening, complete all as specified and directed.

Taking down shutter of any description n.exc 1 Sqm but n.exc 2 Sqm each and refixing in same opening, complete all as specified and directed.

S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F butt hinges of size 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F 150mm long aluminum anodized barred tower bolts of extruded section, complete all as specified and directed.

S&F 150mm long aluminium alloy handle, fabricated type, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips and providing new pins / spring clips, complete all as specified and directed.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm. in each pane, complete all as specified and directed.

S&F 3mm thick figured glass, pin headed type, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

S&F in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple in repair including wooden beads, complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed.

S&F in repair curtain rod 20mm dia anodised aluminum chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

S&F CP bracket and other accessories for fixing of 20mm dia curtain rod to wall, complete all as specified and directed.

S&F in repair hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw 100mm, complete all as specified and directed.

M&L for preparing of new steel & Iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel (1st grade quality) paint over a coat of red oxide primer, complete all as specified and directed.

S&F in repair 25mm thick wooden grain PVC celuka ply for shutters of built in cupboards, almirahs, book cases, toilet boxes, racks and kitchen cabinet and similar work fixed with screws/self tapping screws etc. including required accessory and builder hardware (steel handle, hasp & staple, magnet), complete all as specified and directed.

S&F in repair 18mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmet and similar work fixed with screws/self tapping screws etc, complete including required accessory and builder hardware, complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 15mm thick (10mm + 5mm) in two coats on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound at top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed

M&L 10mm thick rendering in CM (1:3) as in ceiling, chajja, soffits etc, finished surfaces fair and even, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 500 ltr & n.exc 1000 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

Cleaning and removing all scale and dirt etc, from tanks of capacity exc 250 ltr & n. exc 500 ltr, and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item "Tank Cleaned on ____" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.

S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed..

S&F steel water tubing and connection, medium grade, 15mm bore with all fitting, fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed.

Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, fixed complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling with and including 'J' hook, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, fixed complete on wall/ceiling, complete all as specified and directed. (Note : Serviceable steel tube obtained from taking down shall be re-used)

S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repair 15mm bore angle stop valves, cast copper alloy, high pressure, with crutch or butterfly handle, screwed down, screwed for iron pipe, compelete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy, chromium plated, high pressure, with crutch or butterfly handle, screwed down, screwed both ends for iron pipe or for brass ferrule, compelete all as specified and directed.

S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges, compelete all as specified and directed.

S&F in repairs 15mm bore health faucet with 1.0m tube & hook (branded tube), complete all as specified and as directed.

S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm bore pipe, complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet, ball valve, float and handle, complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S & F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 25cm wide with chromium plated bracket guard, complete all as specified and directed.

S&F in repair vitreous china EWC (padestal pattern) white 'P' or 'S' trap and including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and as directed.

S&F in repair plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for pedestal pan, complete all as specified and as directed.

S&F in repairs CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick rendering back coat in CM (1:4), complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed.

Disconnecting existing PVC water tanks of any size, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, complete all as specified and directed.

Taking out old damaged tarfelt or membran of any description including screed bed or bedding layer and removing of debris to a distance exc. 50m and n. exc. 100m and cleaning roof surfaces to remove all loose dust etc., roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water using wire brush, brooming down and applying the following treatment all as directed in order of precedence as stated: (a) Brushing neat cement slury with 3.0 kg of cement per Sqm. (b) 15mm thick screed bed or bedding layer in CM (1:4) mixed with water proofing compound as per manufacturer instruction on existing roof surface true to level. (c) Applying one coat of cold bituminous primer over screed bed @ 300ml/Sqm confirming to IS-3384 (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.11 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. (iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017. (iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. (vi) The work shall be executed through authorised applicators of original manufacturer only. (viI) WPC shall be measured and paid separately as supply only.

Removal of vegetation/grass etc including cutting holes into or through brick walls/concrete and removal of small trees/woods etc and making good distrubed surfaces with cement with PCC (1:2:4) type B-0 (using using 12.5mm graded crushed stone aggregate), surface area n. exc. 0.5 Sqm, complete all as specified and directed.

Cleaning/Uprooting of vegetation/small trees, muds, garbages, waste etc growth on inaccessible RCC roof, AC sheet roof, below wind tie, cleaning of AC sheet/CGI sheet, valley gutter and shaft portion of wall surfaces, back side of toilet portion, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, including dismantling of old CGI sheet of any gauge & thickness, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, including dismantling of old PGI sheet of any gauge & thickness, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161 1979 grade St.-240, complete all as specified and directed.

S&F 4mm thick non asbestos fibre reinforced designer ceiling board (610mmx610mm) with hot drip heavy duty suspended ceiling grid system T-2430 with GI frame work for seamless ceiling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section including hangers 6mm dia GI fixed to roof by means of ceilling cleats made out of GI flat per manufacturers instructions including dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/ blankets any thickness and wall paneling including cover fillets, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings n. exc. 15cm thickness (below or above ground level) , complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in floors etc. finished even and fair with using extra cement etc, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in floors etc. finished even and fair with using extra cement etc, complete all as specified and directed.

M &L PCC (1:3: 6) type C1 (using 20mm graded crushed stone aggregate) as in in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for granite (of any type) slabs 18 - 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, on floors, over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L for 18 - 20mm thick granite (of any type) slabs machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stoneas in skirting/dado, over and including rendering 10mm thick in CM (1:4) as backing coat, complete all as specified and directed.

M&L 25mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints troughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description disposal unserviceable materials, debris and rubbish to a distance n. exc. 100m, complete all as specified and directed.

M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

Taking down carefully ceiling fans/exhaust fans from any height and of any make and sweep including disconnecting the cable from ceiling rose and deposited to MES store for repair/replacement and refixing the same, complete all as specified and directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items.

S&F in repair of switch piano flush button 5 Amp single pole one way 230 volts white finish, complete all as specified and directed.

M&L for replacement and connecting up fan regulator electronic on existing phenolic laminated sheet dimmer type 230 volts, 450 watts suitable for ceiling fan 1200/1400mm sweep, complete all as specified and directed.

S&F in repair modular type fan regulator (2 module), AC 230 Volts, complete all as specified and directed.

M & L for preparation of painted surfaces of ceiling fan of any make and size up to 1400mm sweep and applying one coat of synthetic enamel white paint (1st grade quality) by spray painting including marking of MES No on bottom of fan by applying black paint, complete all as specified and directed.

M & L for preparation of painted surfaces of exhaust fan by gray paint for exhaust fans of any make of 300/450mm sweep and applying one coat of synthetic enamel white paint (1st grade quality) by spray painting including marking of MES No by applying black paint, complete all as specified and directed.

M & L for replacement of short circuit /over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling, complete re asssembling of ceiling fan with testing etc, complete all as specified and directed.

All as per item No 106.00 here-in before but having 1400mm sweeps, complete all as specified and as directed.

All as per item No 106.00 here-in before but exhaust fan any make having 300mm sweep, complete all as specified and as directed.

All as per item No 106.00 here-in before but exhaust fan any make having sweep more than 300mm but not more than 450mm, complete all as specified and as directed.

S & F in replacement of gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep, complete all as specified and as directed.

S & F in replacement of ball bearing of ceiling fans of ball bearing No 6201-Z, complete all as specified and as directed.

All as per item No 111.00 here-in before but ball bearing No 6202-Z, complete all as specified and as directed.

All as per item No 111.00 here-in before but ball bearing No 6203-Z, complete all as specified and as directed.

All as per item No 111.00 here-in before but ball bearing No 6204-Z, complete all as specified and as directed.

All as per item No 111.00 here-in before but ball bearing No 6205-Z, complete all as specified and as directed.

S&F in replacement of canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour, complete all as specified and as directed.

S&F in replacement of down rod of ceiling fan with down rod of 15mm bore, medium grade, GI pipe 0.30 metre long with new clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and as directed.

S&F in replacement of down rod of ceiling fan with down rod of 15mm bore, medium grade, GI pipe 0.45 metre long with new clamps, bolts, nuts, split pins washers of suitable size of approved quality, complete all as specified and as directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 2.5mfd, 240 Volts, complete all as specified and as directed.

S&F in replacement of capacitor of ceiling fans with capacitor having capacity 3.15 mfd, 240 Volts, complete all as specified and as directed.

S&F on replacement of capacitor of ceiling fans with capacitor having capacity 4.0 mfd, 240 Volts, complete all as specified and as directed.

S&F in replacement ceiling rose surface bakelite, 65mm x 50mm size, three terminals including PVC mounting block white/ivory, complete all as specified and as directed.

S&F in repair rubber bush insulator reel type suitable for fan hook of any type, complete all as specified and as directed.

S&F in replacement of hanger clamp assembly of down rod for hanging of ceiling fan fixed with nuts, bolts, washers and split pin, complete all as specified and as directed.

S & F energy efficient 200mm PVC air ventilating fan, high speed, complete with louvers and connecting wire up to nearest ceiling rose including taking down old unserviceable fan of any sweep, complete all as specified and as directed. (Make : Havelles model No. Ventil Air DX HS white or equivalent model in Bajaj/Orient/Usha)

S&F energy efficient PVC wall mounted fan 300mm sweep, including fitting to existing wall, connecting to nearest electrical socket and making good as per existing including taking down unserviceable wall mounted fan from site and deposited to MES store yard , complete all as specified and directed. (Make : Havells model No. D' Zire Gray or equivalent model in Orient/Usha)

Comprehensive repair/maintenance of storage type electric heater (geyser) vertical/horizontal type of capacity upto 25/50 ltrs comprising of the following works, complete all as specified and as directed :- (a) Inspection, taking down or dismantling, de-scaling, brushing and thoroughly cleaning the storage tank upto the entire satisfection of Engr-in-Charge. (b) Checking of all stop cock, pressure release valve, fusible plug etc to ensure free functioning of the parts including Supply and replacement of washer/gasket, nuts etc as required. (c) Inspect overflaw and vent pipes and remove blockages (if any). (d) Checking and rectify earth continuity of the electrical circuits of the geyser and power points. (e) Check, maintain and re-fixing thermostat and re-adjust. (f) Visual examination of of fusible plugs for its serviceability. (g) De-scaling the immersion type heating element and siphon assembly with diluted hydrochloride acid or cear pedette solution. (h) Checking of indicator lamp for its serviceability. (j) Re-assembling the geyser, re-installed and testing. Note: (i) Spare parts/components of geysers shall be measured and paid seperately as "supply only" under respective items. (ii) Any minor parts required for smooth functioning of the geyser shall be provided by the contractor without any extra cost to the Govt.)

Supply only heating elements as per site requirement of capacity 1.5 KW, 230 volts ISI marked, complete all as specified and as directed.

Supply only heating elements as per site requirement of capacity 2 KW, 230 volts ISI marked, complete all as specified and as directed

Supply only aperature plate suitable for 50 Ltr capacity, complete all as specified and as directed

Supply only aperature plate suitable for 25 Ltr capacity, complete all as specified and as directed

Supply only high pressure safety valve, complete all as specified and as directed

Supply only geyser NRV (Non Return Valve) 1/2 inch 0.8 MPa pressure, complete all as specified and as directed

Supply only hot and cold "304 grade stainless steel re- enforced flexible connection pipe" 450mm long ISI marked, complete all as specified and as directed

Supply only thermostate adjustable type 11/20 Amp 240 Volts, ISI Marked, complete all as specified and as directed

Supply only thermostate adjustable type 7/15 Amp 240 Volts, ISI Marked, complete all as specified and as directed

Supply only glass wool insulating packing for 25/ 50 Ltr geyser, complete all as specified and as directed.

M & L for shifting of water heater electric type any capacity including fixing arrangment on wall / wooden structure,wall bracket and other connected accessories, complete all as specified and directed.

S&F in repair 15mm bore stop valve cast coper alloy screw down high pressure with crutches or butterfly handle screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair 15mm bore bib tap cast alloy screwed down nwith crutches sor butterfly handle screw down for iron pipe of for brass ferrule, complete all as specified and directed.

Note: An amount of Rs.67,832.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S SARDAR MAL NAHATA

M/S BISHAL ENTERPRISES

M/S. NARENDRA KUMAR GARG

Shri T P ANIL KUMAR