Comperihensive Maintanance / Cleaning of overhead tank / Under ground sump / Semi under ground sump / Swimming pool / PVC tank and chemicals for swimming pool alongwith certain misc work at

Amount

M&L for cleaning and repair of overhead tanks having staging 15 metres and tank height up to 20 metres of 25,000.00 Gallons capacity by adopting following method :- (a) Removing accumulated sludge and solid particles etc deposited at the bottom of tank and removing the same to a distance not exceeding 50 mtr away all as directed by Engr-in-Charge. (b) Washing with clean water and bleaching powder solution by rubbing with wire brushes on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of the tank and applying two coats of cement base paint, making it absolutely germ free complete all as specified and as directed by Engr-in-Charge. (c) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning and repair of overhead tank having staging 15 metres and tank height up to 20 metres of 75,000.00 gallons capacity by adopting following method :- (a) Removing accumulated sludge and solid particles etc deposited at the bottom of tank and removing the same to a distance not exceeding 50 mtr away all as directed by Engr-in-Charge. (b) Washing with clean water and bleaching powder solution by rubbing with wire brushes on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of the tank and applying two coats of cement base paint, making it absolutely germ free complete all as specified and as directed by Engr-in-Charge. (c) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly. .

M&L for cleaning and repair of semi underground sump of capacity 25,000.00 gallons by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (e) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning and repair of semi underground sump of capacity 50,000.00 gallons by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (f) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning of overhead steel tanks of 10,000.00 gallons capacity by adopting following method :- (a) Removing accumulated sludge and solid particles etc deposited at the bottom of tank and removing the same to a distance not exceeding 50 mtr away all as directed by Engr-in-Charge. (b) Washing with clean water and bleaching powder solution by rubbing with wire brushes on all side walls, dome portion and bottom of the tank and removing grits and other deposted materials complete inside and outside of the tank, applying two coats of synthetic enamel paint over a coat of red oxide primer and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Welding work with the specified size of MS plain sheet and angle iron to steel tank to stop leakages complete all as specified and as directed by Engr-in-Charge. (d) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning of overhead steel tanks of 20,000.00 gallons capacity by adopting following method :- (a) Removing accumulated sludge and solid particles etc deposited at the bottom of tank and removing the same to a distance not exceeding 50 mtr away all as directed by Engr-in-Charge. (b) Washing with clean water and bleaching powder solution by rubbing with wire brushes on all side walls, dome portion and bottom of the tank and removing grits and other deposted materials complete inside and outside of the tank, applying two coats of synthetic enamel paint over a coat of red oxide primer and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Welding work with the specified size of MS plain sheet and angle iron to steel tank to stop leakages complete all as specified and as directed by Engr-in-Charge.. (d) Cleaning of overhead tanks are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching upto 20 metres height tank for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 500 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed by Engr-in-Charge. ( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto)

M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed by Engr-in-Charge. ( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto)

M&L for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 2000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed by Engr-in-Charge. ( Make: Sintex / Polycab / Polyvinyl / Vectus / Penguin / Plasto)

S&F PVC float valve, high pressure with polythene float and fly nut complete ISI marked of size 15mm, complete all as specified and as directed by Engr-in-Charge. including dismantling old unserviceable. Make :- Prayag / Polytuff / or equivalent as approved by GE.

S&F PVC float valve, high pressure with polythene float and fly nut complete ISI marked of size 20mm, complete all as specified and as directed by Engr-in-Charge. including dismantling old unserviceable. Make :- Prayag / Polytuff or equivalent as approved by GE.

S&F PVC float valve, high pressure with polythene float and fly nut complete ISI marked of size 25mm, complete all as specified and as directed by Engr-in-Charge. including dismantling old unserviceable. Make :- Prayag / Polytuff or equivalent as approved by GE.

Disconnecting existing tanks of capacity 300 Ltrs to 500 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as specified and as directed by Engr-in-Charge.

Disconnecting existing tanks of capacity 750 Ltrs to 1000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as specified and as directed by Engr-in-Charge.

Disconnecting existing tanks of size 2000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as specified and as directed by Engr-in-Charge.

Removing existing damaged / unserviceable any type / gun metal globe / gate valve from the pipe line and supply and fixing of gun metal globe / gate valve (ISI) marked with iron wheel head, screwed both ends for iron pipe all as specified and as directed for the following sizes:- ( Make: Leader / BIR / Zoloto / TATA / KSB / Kartar / Kirloskar)

50mm dia

25mm dia

20mm dia

15mm dia

80mm dia

Removing existing damaged / unserviceable union from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Nipple from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Socket from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Elbow from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Plug top from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Bend from the pipe line and supply and fixing of the same all as specified and as directed for the following sizes:-

50mm dia

25mm dia

20mm dia

15mm dia

Removing existing damaged / unserviceable Tank nipple from the fixing of tank and supply and fixing of the same all as specified and as directed for the following sizes:-

25mm dia

20mm dia

15mm dia

Taking up and down the complete pumping set of capacity 15 HP to 20 HP from exisiting borewell of depth 90 mtr alongwith column pipe 80mm bore total length 70 RM after disconnecting the pump from electric circuit. and after repair lowering the same to the satisfaction of Engineer-in-Charge. (Note: - Any repair required for pumping set, bore well will be measured and paid separately under respective items. T&P required for repairs , lowering or taking up of pumping set will be the responsibility of the contractor and rates quoted are deemed to be included in unit rate quoted.)

M & L Submersible pump of capacity 15 / 20 HP and rewinding the motor with super enameled copper conductor of standard size including varnish, insulation paper and soldering of connection etc. Assembly of motor with pump set with necessary studs, bolts, washers etccomplete all as specified and as directed by Engr-in-Charge. Make of wire : ALTAS / HTP / DEVI DAYAL

PVC Tank lead (top cover) high quality/ heavy duty theraded type suitable for 500 ltrs complete all as specified and as directed by Engr-in-Charge..

PVC Tank lead (top cover) high quality/ heavy duty theraded type suitable for 1000 ltrs complete all as specified and as directed by Engr-in-Charge..

PVC Tank lead (top cover) high quality/ heavy duty theraded type suitable for 2000 ltrs complete all as specified and as directed by Engr-in-Charge..

M&L 80 mm bore MS pipe High grade (B class) each pipe 3 meter length with welded of 02 Nos (hevay duty ) with flange in / outer side area and level /direction setting complete including painted one coat red oxide paint and two coat of enamell painted complete all as specified and as directed by Engr-in-Charge.

M&L 50 mm bore MS pipe High grade (B class) each pipe 3 meter length with welded of 02 Nos (hevay duty ) with flange in / outer side area and level /direction setting complete including painted one coat red oxide paint and two coat of enamell painted complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Submersible cable copper 10 sqmm 3 core Flat type double coated PVC insulated multi stranded FRLSH ,IS marked complete all as specified and as directed by Engr-in-Charge. Make : Finolex/ havells/RR cabels/ KEI)

Supply and fixing Submersible cable copper 06 sqmm 3 core Flat type double coated PVC insulated multi stranded FRLSH ,IS marked complete all as specified and as directed by Engr-in-Charge. Make : Finolex/ havells/RR cabels/ KEI)

Dismantiing for repair, servicing, and reassembling RO filter plant after servicing of capacity 10 Ltr/ Hr complete all as specified and as directed by Engr-in-Charge. Note:- Replaced damaged / unserviceable part will be issued separtely under respective items as supply only.

Supply & Fix sand filter for RO filter plant of capacity 10 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix only Activated carbon filter for RO filter plant of capacity 10 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix only membrane for RO filter plant of capacity 10 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply& Fix only pressure switch with relay for RO filter plant of capacity 10 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix Pump for RO filter plant of capacity 10 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Dismantiing for repair, servicing, and reassembling RO filter plant after servicing of capacity 08 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Note:- Replaced damaged/ unserviceable part will be issued separtely under respective items as supply only.

Supply & Fix only sand filter for RO filter plant of capacity 08 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix only Activated carbon filter for RO filter plant of capacity 08 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix only membrane for RO filter plant of capacity 08 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix only pressure switch with relay for RO filter plant of capacity 08 Ltr/Hr complete all as specified and as directed by Engr-in-Charge. Make Kent

Supply & Fix Pump for RO filter plant of capacity 08 Ltr/Hr of Make Kent complete all as specified and as directed by Engr-in-Charge.

Start Push button (Green colour) normally open contact suitable for soft starter of capacity 30 KW complete all as specified and as directed by Engr-in-Charge.

Stop Push button (Red colour) normally closed contact suitable for soft starter of capacity 30 KW complete all as specified and as directed by Engr-in-Charge.

Supply and replacement of MPCB thremal range Amps 25 - 32 Amps 3 pole 415-440 volt, 50Hz, 16 kA power manual motor starter with rotary knob control protection against overload, Short circuit, incl Phase failure complete all as specified and as directed by Engr-in-Charge. ( Make: C&S /ABB)

Supply and replacement of MPCB thremal range Amps 50 - 60 Amps 3 pole 415-440 volt, 50Hz, 16 kA power manual motor starter with rotary knob control protection against overload, Short circuit, incl Phase failure complete all as specified and as directed by Engr-in-Charge. ( Make: C&S /ABB)

Supply and Replacement of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 150mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect all as specified. ( Make: Leader / BIR / Zoloto / Kirloskar)

Supply and Replacement of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 100 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etccomplete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

Supply and Replacement of Cast iron Butterfly Valve , SS dise with hand lever operated, lining test pressure PN 1.6 ISI marked of size 80 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

Supply and Replacement of 80 mm bore Cast iron flanged sluice valve PN 1.6 with stainless steel spindle and CI wheel head with flanged ends, including necessary jointing material such as rubber gasket, bolts, nut & washer of suitable size and welding including testing etc and including taking down old unserviceable complete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / TATA / KSB / Kartar / Kirloskar)

Supply and Replacement of 100 mm bore Cast iron flanged sluice valve PN 1.6 with stainless steel spindle and CI wheel head with flanged ends, including necessary jointing material such as rubber gasket, bolts, nut & washer of suitable size and welding including testing etc and including taking down old unserviceable complete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

Supply and Replacement of 150 mm bore Cast iron flanged sluice valve PN 1.6 with stainless steel spindle and CI wheel head with flanged ends, including necessary jointing material such as rubber gasket, bolts, nut & washer of suitable size and welding including testing etc and including taking down old unserviceable complete all as specified and as directed by Engr-in-Charge.

Supply and Replacement of 200 mm bore Cast iron flanged sluice valve PN 1.6 with stainless steel spindle and CI wheel head with flanged ends, including necessary jointing material such as rubber gasket, bolts, nut & washer of suitable size and welding including testing etc and including taking down old unserviceable complete all as specified and as directed by Engineer-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

Taking out old unsv 100 mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with and including including complete fixing accessories like nut, bolt, washers, packing etc and complete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

Taking out old unsv 80 mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with and including including complete fixing accessories like nut, bolt, washers, packing etc and complete all as specified and as directed by Engr-in-Charge. ( Make: Leader / BIR / Zoloto / Kirloskar)

M&L for cleaning of swimming pool of capacity 8,00000.00 Lakh approx by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump making it absolutely germ free complete all as specified and as dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of cover placed at the sump complete all as specified and as directed by Engr-in-Charge. (e) Cleaning of swimming pool are carried out in two time during the contract peroids for each tank , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning and repair of semi underground sump of capacity 1,00000.00 gallons by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (e) Cleaning of semi under ground sump are carried out in two time during the contract peroids for semi under ground sump , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M&L for cleaning and repair of over head cement tank of capacity 20000.00 gallons by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (e) Cleaning of over head cement tank are carried out in two time during the contract peroids for swimming pool , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M & L for cleaning and repair of over haed Static Water Tank of capacity 25,000.00 gallons by adopting following method (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and directed by Engr-in-Charge. (e) Repair and Painting of iron cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (f) Cleaning of over head static water tank are carried out in two time during the contract peroids for over head static water , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

M & L for cleaning and repair of Static Water Tank (SWT) of capacity 20,000.00 gallons by adopting following method :- (a) Taking out the water from the sump with the help of monoblock pump set and removing accumulated sludge and solid particles etc deposited at the bottom of sump and removing the same to a distance not exc 50 metres away as directed by Engr-in-charge. (b) Washing with clean water and bleaching power solution by rubbing with wire brusesh on all side walls, dome portion and bottom of the tank and removing grits and other deposited materials complete inside and outside of sump and washing with two coats of cement wash and applying two coats of cement base paint and making it absolutely germ free complete all as specified and dircted by Engr-in-Charge. (c) Repair to leakage, water inlet point and water out let point, with quick setting cement (d) Replacement of wire mesh cover placed at the top of sump complete all as specified and directed by Engr-in-Charge. (e) Repair and Painting of iron cover placed at the top of sump complete all as specified and as directed by Engr-in-Charge. (f) Cleaning of static water tank are carried out in two time during the contract peroids for over head static water , both cleaning are measured and paid accordingly. Note :- Quoted rates shall be deemed to include the cost of necessary arrangement for reaching for repair and cleaning and lowering the waste material and nothing extra shall be admissible on this account . Bidder are requested to quote their rate accordingly.

Repair / Rewinding of pressure pump set of cap 0.5 HP / 1.0 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement complete all as specified and as directed by Engr-in-Charge.

Repair / Rewinding of submersible pump set of cap 0.5 HP / 1.0 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement complete all as specified and as directed by Engr-in-Charge.

M & L for display board of size 750mm X 1000mm made out of acrylic sheet 2 mm thick fixed on 12mm thick plywood & 20 mm wide aluminium beeding all around the sheet edges including 2 Nos.Key holes hooks for hanging & 40 mm batten to be fixed on wall for bottom supports.The board shall include description of pump /motor/any other machinery / layout / schamatic diagram of water / electric supply system etc all as directed by Engineer- in- Charge.letters/ diagrams made out of computer aided print in acrylic material of any colours as specified pasted on sheet for the description / details given saparetely for each board fixing the same at E/M installations complete all as specified and as directed by Engineer-Charge.

Supply and fixed star delta starter complete set with suitable size cable for connection between starter to auto transformer suitable for upto 30 HP, 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nut bolts etc fixed to wall fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and as directed by Engineer-Charge. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed star delta starter complete set with suitable size cable for connection between starter to auto transformer suitable for upto 40 HP, 3 Phase, 415 V electric motar including necessary connection and complete fixing arrangement wire, nut bolts etc fixed to wall on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and as directed by Engineer-Charge. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply only rubber hand gloves complete set complete all as specified and as directed by Engineer-Charge.

Supply only rubber mat of size 1m X 2m X 19 mm suitable for pump house complete all as specified and as directed by Engineer-Charge.

Rendering 15mm thick in patches on damaged plaster internally of overhead tank / underground sump of any capacity in cement mortar 1:3, using liquid water proofing compound , surfaces finished even and smooth using extra cement, etc complete all as specified and as directed by Engineer-Charge.

M&L for PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) in foundation, for brick pillars for supporting the pipe line complete all as specified and as directed. .

M&L for construction of brick pillars of required size and shape, with sub class ‘B’ bricks, in cement mortar 1:4 for supporting of pipe line, complete all as specified and as directed by Engineer-Charge.

M&L for 10 mm thick cement plaster, in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and fair, complete all as specified and as directed by Engineer-Charge.

M&L for 8 mm thick M S cover 150 mm 06 liver pad lock suitable for over head tank, semi under ground and under ground sump and finished even and fair, with complete fixing with locking arrangement complete all as specified and as directed by Engineer-Charge.