REPAIR TO RETYAINING WALL, DRAINS, FENCING AND OTHER MISC REPAIRS IN RR UNITS AT KISHTWAR, BHANDARKOT AND DUL AREA OF 9 SECTOR UNDER GE (I) 873 EWS.

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Factory made (rectified) precast concrete rubber moulded designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layer complete.

100mm thick plain cement concrete 1:4:8 type D-2 (40mm graded crushed aggregate) as in sub base, finishing surface even & fair, complete all as specified and directed

50mm thick plain cement concrete 1:2:4 type B-1 (20mm graded crushed aggregate) as in floor/hardstanding surface finshed even and smooth w/o using extra cement including necessary formwork to divide the area into panels, complete all as specified and directed

75 mm thick plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in as in sub base, finishing surface even & fair, complete all as specified and directed

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Walling of random rubble stone masonry brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. Note:- PCC bond stones shall be deducted from the stone masonary.

Description all as per item No. 10.00 above, but except stone complete all as specified and directed

Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in anchorage blocks, bonders (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, built in cement mortar, complete all as specified and directed.

Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed.

Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in copings, and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

PVC (SWR) pipes 110mm bore any length single socketed with rubber ring joint laid in weep holes, fixed, complete all as specified and directed.

Broken stone or boulders in hand packing (any thickness) at back of walls etc. and raising (or lowering) to the required level, complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified.

Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings , complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work masonry etc complete all as specified

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engr –in Charge

Mild steel work as in hand rails, half round or other steel section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 all as specified.

Mild steel screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other ends, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long, diameter of shank 11 to 15mm, complete all as specified & directed.

Dismantling fencing wire mesh, any type complete all as specified

Supply only chain link fencing of 3.15mm dia galvanised steel wire, conforming to IS : 2721 -2003 including line wires, straining bolts, binding wire etc., complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed.

Mild steel round bars , 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stiffner to hold the chain link fencing, complete all as specified

Dismantling of galvanised barbed wire of any description or in any position complete and removing from site all as specified and as directed.

Galvanised, 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing and tying at crossings with and provision of galvanized mild steel wire, staple or steel pins, etc complete all as specified and directed

Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia, complete all as specified

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed.

M/S Girdhari Lal Parihar

Bidder Name

M/S KOTWAL CONSTRUCTIONS

M/S Girdhari Lal Parihar