Modification/design, supply, erection, testing and commissioning of 25 KV, 50Hz AC, Existing/New SP work at Chirgaon station in Jhansi division.

11b Supply without Insulator and erection of 25 kV Post Insulator.

28-Supply without Insulator & erection of 25 kV D.O. fuse switch.

31(m)(i)- Manning of Switching stations (SP/SSP).

36(a)-Unloading of all type of Steel Structures.

36(b)-Loading of all type of Steel Structures.

37(a)-Unloading of all type of Copper & Aluminium conductors.

30(b)(iii)-Supply and erection of anticlimbing device for L.T. Supply Transformer Stations.

3(m)-Supply of 36 mm dia MS bolts, Nuts, Lock Nuts and washers.

11(ax)(i)- Supply of 9-Tonne Insulator for item 11(a)(i) & 11(a)(ii)-Porcelain (CD-1050 mm)

11b(x)- Supply of 25 kV Post Insulator for Item 11 (b)

13(ax)-Supply of Post & Operating rod insulators for item 13(a)

13(bx)-Supply of Post & Operating rod insulators for item 13(b)

13(cx)- Supply of Post & Operating rod insulators for item 13(c)

28(x)- Supply of Post insulators for item 23

06-Extra on erection rate for work under power block

2c(i)-Reinforced concrete for foundation & trench.

3b(iii)-Supply, fabrication, galvanisation & erection of steel gantries/portals supporting structures and small parts steelwork.

Erection, testing & commissioning of 25kV single pole VacuumType Circuit Breaker

28-Supply & spreading of Ballast/Gravel in the switch Yard.

7(e)(i)-Dismantling of Cross Feeder.

15(a)(iv)-Dismantling of Drop Jumper.

15(d)-Dismantalling of large Jumper Alu. Bus-Bar to Cross Feeder.

15(e)-Dismantalling of large Jumper Cross Feeder to OHE,

7(a)-Erection of All Aluminium 25 KV feeder/ Return conductor

7(e)(ii)-Erection of Copper cross feeder 150 Sq.mm

15(b)Erection of All Aluminum Jumper

15(d)-Erection of Large Copper Jumper 160 MM Between Aluminium Bus and Cross feeder.

15(e)-Erection of Large Copper Jumper 160 MM Between cross feeder and OHE

3(b)(ii)-Erection of Traction Mast, Main Fabricated Mast for Item No. 3a(i) & 3b(ii).

3(b)(iii)-Erection of Traction Mast, Main Fabricated Mast for Item No. 3b(i) , 3( c) & 3b (iii).

08-Non Schedule Items

Handling, leading, loading, transportation of released cut masts SPS and other OHE materials from site to the stores of to concerning depot Jhansi, unloading and stacking.

Supply & Erection Insulating Rubber mat for control room as per latest IS 1m x 2m

Supply & Erection Electric Shock Treatment chart in Hindi (larger size) with Alumininum frame and glass front as per instructions

Supply & Erection First aid box complete with medicine and fixing on wall as per instructions of site in charge

Supply of Office Almirah for TSS/SP/SSP.

Supply of Table for TSS/SP/SSP.

Supply of office chair for TSS/SP/SSP.

Supply of Discharge /Earthing rod complete assembly for 25 kV, AC traction

Provision of TWR & Other diagram in TSS, SP & SSP.

Computer as per specification in Tender Document for TSS/SP/ SSP/ Depot

Printer as per specification in Tender Document for TSS/SP/ SSP/ Depot.

UPS as per specification in Tender Document for TSS/SP/ SSP/ Depot

Supply & spreading of Ballast / Gravel in the Switch Yard.

Supply & erection of ceramic beaded glass fiber type short neutral section assembly [PTFE] as per RDSO Specification No-TI/SPC/OHE/SNS0000 or latest,

Supply, Erection, Testing and Commissioning of RTU for SP/SSP as per RDSO Specification No.TI/SPC/RCC/SCADA/0130(Rev-03) OR latest with necessary modification with RCC also at site of SP/SSP

Supply and Fixing of following Safety Items in Sub-Station-Fire Extinguisher Dry Chemical Power Type 10 KG, Capacity [ISI] Mark Suitable for Electric Fire to be Provided on the wall with Suitable Fixing Accessories,

"Supply and Fixing of following Safety Items in Sub-Station -Supply and Fixing of following Safety Items in Sub-Station - GI Fire Buckets [6 Nos] 24 Gauge Fitted on Steel Stand asper Drawing Approved by Railway, Each 10 Liter Capacity Filled with Clean Dry Ordinary Sand."

Supply of Schematic Diagram board showing single line diagram of Electrical Installation neat drawn with plant on white hylum sheet with Al frame etc as per instruction, clamping and fixing arangement on wall as per site requirment size 121 x 62cm.)

Supply & laying of XLPE Insulated LT Under Ground Cables,1.1 KV, Grade-2 Core 70Sq MM

Termination of XLPE Insulated LT Under Ground Cables 1.1 KV,Grade-2 Core 70 Sq MM. Aluminium conductor,

Supply of Name Board of TSS, SP, SSP.

Dismantling of 10 KVA AT/ 25 KVA, Auxiliary transformer along with Jumper, D.O. fuse assembly, LV box etc.

Supply & Erection of Provision of Buried Rail.

Supply, Erection, testing and commissioning of single earth electrode of 50 mm dia 24 3000 mm long GI pipe class B confirming to IS: 1239 latest complete with earth box including connection from earth electrode ot MDB/SDB/Panel /J Box with 8 SWI GI wire. wiring arrangement as per Rly. Drawing for suitable earth resistance value.

Supply of materials & making wiring of various points such as FT fittings /ceiling fans /Exhaust/ ordinary light point etc with 2.5 sqmm (FRLS) PVC insulated multistranded copper conductor cable single core conforming to IS : 694 or latest version in concealed PVC conduit pipe heavy duty 2mm thickness double locking / in recessed PVC conduit pipe heavy duty 2 mm thickness 25 ISI mark (As per site requirement ) with Bakelite batten holder / angular holder/ceiling rose, 5A flush type switch/Modular switch, white phenolic laminated sheet cover on front of recessed MS box or suitable size or PVC box / modular box for surface system with brass screws, cup washers etc .including earth continuity copper wire of 1.5 sqmm PVC insulated copper wire complete. ( Note :- The wire from SDB to switch board shall be of 04 sq.mm PVC insulated copper wire. & In recessed type wiring system after wall/surface excavation, filling should be with same material in all respect required as per site . Also inclusive removal of existing wiring if required.)

Supply of materials & making wiring points of 5 pin 5A plug socket with 2.5 sqmm PVC insulated multistranded copper conductor cable (FRLS) single core conforming to IS : 694 latest 26 version in concealed with PVC conduit pipe heavy duty (ISI mark)/with, 5A flush type switch / modular switch on front of sheet / modular top to modular box/ PVC box / MS box of suitable size with brass screws, cup washers etc complete including earth continuity wire of 1.5 sqmm PVC insulated, Complete with all other accessories required as per site and removal of existing wiring if required.

Supply of materials & making wiring point of 6 pin combined power point 15A/5A ( After removing of existing wiring if required) with wiring by 4 sqmm PVC insulated multistranded copper conductor cable (FRLS) single core conforming to IS : 694 OR latest version in concealed with PVC heavy duty (ISI mark), with 15 A flush type switch/ modular switch, 16 Amps MCB SP , white phenolic laminated sheet cover on front of recessed MS box or Modular box/PVC box of suitable size with brass screws, cup washers etc including earth continuity copper wire of 1.5sqmm PVC insulated copper wire complete.

Supply errection testing and commissioning of Luminaire complete with all 28 accessories, 18 /20 watt, 04 feet LED Tube light fitting and Tube well suitable current control driver circuit, Suitable for surface mounting and connection with PVC Copper flexible wire of 23/76 as per railway specification attached.

Supply, erection, testing and commissioning of sub main 2x6 Sq.mm PVC insulated 29 sheathed copper wire, multi strand 1100 volts grade, continues PVC insulated insulated sheathed copper earth wire of 1.5 sq mm through PVC heavy duty conduit pipe complete with all other accessories required as per site.

Supply,erection,testing and commissioning of 380 mm sweep, 1400 RPM single phase, 50 Hz AC Exhaust fan totally enclosed heavy duty motor with die cast Alluminium rotor mounted on two ball bearing complete with all other fixing accessories.

Excavation of cable trench as per specification attached.

Laying/Cleating of 3/4 core HT/LT cable as per specification attached

Supply, Erection, Testing & Commissioning of 5 star rated super energy saving efficient BLDC Celling Fan, sweep size 1200mm, down rod length as per site requirement, power factor greater than 0.98 with Electronic Regulator & double ball bearing and MS Flat size 50*5mm 33 clamp of suitable size with hanging hook, nut bolt washer etc & Connection shall be taken with twin cord flexible PVC insulated copper wire size 48/0.2mm., 03 blades of Aluminium with power consumption not more than 28 Watt, Warranty 03 years, required make-RR, 5 star rated BLDC super energy efficient celling Fan with double ball bearing, power 28 W. cat-Fan super efficient -ceiling BLDC.

Supply of materials & making wiring points for mobile charging with 2.5 sqmm (FRLS) PVC insulated multistranded copper conductor cable single core conforming to IS : 694 (latest version) in recessed/ on surface (As per site requirment) . On surface PVC casing capping channel heavy duty 34 2mm thickness double locking / in recessed PVC conduit pipe heavy duty 2 mm thickness ISI mark with 5A Modular switch , modular sheet cover on front of in recessed MS box /On surface modular box with brass screws, cup washers etc including earth continuity copper wire of 1.5 sq.mm PVC insulated copper wire. ( Note:- 01 Board contain 04 Nos mobile charging points with ON/OFF switch. The mobile charging points should be apart at a suitable distance on the single board complete with suitable stand for holding of mobile set etc.)

Supply of 4 core 35 sq mm Cable XLPE insulated PVC outer sheathed cable with aluminum conductor suitable for rated voltage at 1100 volts grade and conforming to IS: as per IS: 7098 (Part 1 ) : 1988 latest with galvanised wire armoring.

Excavation of cable duct by horizontal boring method 1.4 to 2.1 Mtr depths from the 36 bottom of sleeper for trench less track crossing and laying of 120mm outer dia DWC pipe. The work shall be done as per extent practice and instruction of site engineer. It includes supply of DWC/DHPE pipes confirming to IS:14930(Part 2, 2001)

Supply, Erection, testing & commissioning of energy efficient LED flood light/pole light luminary 60-70 Watt capacity with luminous efficacy 100 made from pressure die cast aluminum housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 Protection suitable for working on 240 Volt, 50 Hz AC supply. 37 The price shall also cover for fixing, testing and commissioning of the above fitting on pole/truss/roof/wall by fabrication by suitable clamp/bracket made from G.I. flat of 40 x 6 mm approx duly painted with nut, bolts and washers of 12 mm diameter as per site requirement. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire from the existing ceiling rose /catenaries/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit.

Misc. unforeseen items may be required during work execution. The payment of such items will be done on the base of average rates of best available LARs

Item Breakup - 01-General

Item Breakup - 02-Concrete

Item Breakup - 03-Ferrous

Item Breakup - 04-Non-Ferrous

Item Breakup - 06-Extra on erection rate for work under power block

Item Breakup - 07-SOR PSI