SPECIAL REPAIR TO OFFICERS SINGLE ACCN BLOCK NO WB 189 WB191 AND SIX ROOMS OF BLOCK NO WB 185 OF MCTE UNDER GE MCTE MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises .

M&L for Non skid ceramic tiles 8 to 10 mm thick, area of each tiles exceeding 0.18 Sqm but not exc 0.38 Sqm in floor, coloured, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles incl screed bed 15 mm thick in CM (1:6), surfaced finish even and rough to recieve tile finish as in flooring complete all as specified and directed.

M/L 10mm thick rendering in CM 1:4 to receiving wall tiles complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 600mm x 300mm x 8 to 10 mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as speicified and directed.

Taking down steel tubing and connections, 15mm bore, from wall, ceiling, under the earth or in any position, complete all as specified.

S&F GI tubing medium grade 15 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.

Taking down cement plaster on brick or stone walls/ ceiling etc incl raking out joints, hacking for key, scrubbing down with water etc

M&L 15mm thich rendering in CM 1:4 on fair face of brick/concrete surface finished even & smooth without using extra cement.

M&L 10mm thick rendering in cm 1:3 on fair face of concete surface finished even and smooth w/o using extra cement as in ceiling surface.

M&L 15mm thick rendering in cm 1:6 on fair face of brick work/concete surface finished even and smooth w/o using extra cement.

M & L preparation of walls new plastered/ unplastered undecorated surfaces & applying two coats of oil bound distemper over two coats of putty complete all as specified and directed.

M & L for preparation of new surface of ceiling and applying two coats of white wash complete

Preparation of new plastered surface of wall and applying two coat of cement base paint on walls complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 Sqm each with out taking off shutters from the frames and match the disturb portion surface as per exting surface using PCC 1:2:4 and CM 1:4 complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm mtr but n exc 4 Sq Mtr each with out taking off shutters from the frames and match the disturb portion surface as per exting surface using PCC 1:2:4 and CM 1:4 complete all as specified and directed.

Taking down shutters exc. 1 sqm and not exc 2 Sqm each.

S&F second class HW plain, solid, straight chowkates and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain clour PVC sheet reinfornce with M.S square tube in opening as per specification.

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2004 Part-II complete all as specified and directed.

S&F in repairs 18/19mm thick prelaminated paricle block board grade 1 quality interior grade ,solid core ,BB type solid core ,medium density general purpose type with commercial face veneered fixed with screws as in cupboard shutter, kitchen racks/shelves inluding 2nd class hard wood leaping complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and fixed.

S&F 150mm long aluminium anodised handle cast type and fixed.

S&F aluminium alloy ,anodised sliding door bolt 250mm long with hasp and staple (bolt type)and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast -aluminium alloy complete all as specified and directed.

S & F 100 mm long butt hinges medium weight cold rolled mild steel and fixed complete.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

S&F 150 MM long, ordinary rate tail rod pattern springs including roller and roller plate MS complete.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples completed as specified and directed .

Preparation of new surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L powder coated aluminium sliding window with three track ,section not less than 1mm thick over aluminium frame cross section 101mm x 40mm x 1.5mm thick. with shutter of both glazed and gauzed with 5 mm thick glass , stainless steel wire netting (0.36 mm nominal dia and average width of aperture 1.4 mm ) and fixed including necessary glazing clips , rubber packing , anodized aluminium snap beading screws and aluminium fitting all as specified and directed .

S&F standard aluminium anodised grill made of 5mm thick bar, size of mesh 100 x 100mm using U channel 25mm x 12mm complete all as specified and directed.

M & L preparation of old surfaces including scraping of old surface/treatment & applying two coats of oil bound distemper over one coats of putty and primer after word putty completed as specified and directed ..

Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L 75mm thick cement concrete type D2, 1:4:8 (40mm graded stone agregate) as in sub base floor completed as specified and directed .

M&L 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone agregate) as in Plinth protection & hard standing laid in paved surface finished even and smooth without using extra cement incl necessary form work complete.

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm aggregate) for floor finishes laid in paved surface finished even and smooth without using extra cement incl necessary form work and glass dividing strips.

M&L cement concrete type C1, 1:3:6 (20mm graded stone aggregate as in bed block, coping completed as specified and directed ..

S&F in repairs GI tubing medium grade 20 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.

S&F in repairs 15 mm bore fancy type bib taps CP cost copper alloy with handle screw down, sacrewed for iron pipe and fixed complete .

S&F in repairs 15 mm bore chromium plated angle cock/stop cock with long shank and cup (concealed type) completed as specified and directed .

S & F in repairs chromium plated wall mixer for Hot & cold water incl necessary fittings and cromium plated flange complete. Make : Prayag /Plumber

S&F in repairs PVC connection 15mm bore 450mm long with PTMT nut completed as specified and directed ..

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement(75mm outer dia) completed as specified and directed .

S&F in repair. Vitreous china WHB , white size 450 x 400 mm, oval type including brackets including cutting for and pinning in ends of brackets or eracting stands but excluding of fixing of supply and waste pipe completed as specified and directed .

S& F 32 mm bore low density polyethylene pipes of pressure rating 6Kg F cm Sq fixed to wall, ceiling or in floors completed as specified and directed .

S&F PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall and floor completed as specified and directed .

S&F PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints fixed in floor completed as specified and directed .

S&F PVC (SWR) 110 mm bore bends any radius completed as specified and directed .

PVC (SWR) single T equal or unequal 110 mm bore completed as specified and directed completed as specified and directed .

S&F 20mm dia & 600mm long brass chromium plated Tubular towel rail completed as specified and directed .

S & F in repair pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe for 15mm bore iron pipe complete.

S&F in repair for 15mm bore and 100 mm dia head Brass chromium plated shower rose with or with out swivel joints any size including fixing to steel pipe and union completed as specified and directed

R. S. JAIN AND SONS

Jamna Constructions