SPECIAL REPAIR TO BER CEILING FAN P/P FOR AIRMEN MD ACCN OF ALL SMQs AND TMQs AND CERTAIN MINOR WORKS AT HQTC (U) BANGALORE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for vitrified tiles dark shade/ double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm, in floors etc. set and jointed in neat epoxy cement slurry and pointed in white or coloured epoxy cement with 3mm to 4 mm spacer to match over and including 15mm thick screed bed in CM 1:6 all as specified and directed. Note:- The quoted rate include for spacer and epoxy etc.

M&L for vitrified tiles dark shade/ double charged/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm,as in vetical surface etc. set and jointed including 10mm thick backing coat in CM 1:4 etc complete all as specified and directed.

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 350x250x7mm/ 450x300x7mm/ 600x300x7mm thick, to match the floor surface set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10 mm thick rendering on brick work or concrete surfaced wall as backing coat in cement mortar 1:4 etc complete all as specified and directed.

M&L for non skid Ceramic tiles coloured 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and as directed

M&L for 20mm thick Granite of any type work (table rubbed and polished) in cooking platform, window cill, step, wall lining and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick mortar in CM 1:6 etc complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc complete all as specified and directed.

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in CM 1:6 complete etc complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in CM 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for 2coats of distemper oil emulsion on wall surfaces white or tinted over a coat of 1mm thick wall care putty and primer including preparation of new surface all as specified and directed.

M&L for 2coats of distemper oil emulsion on wall surfaces white or tinted over 1mm thick wall care putty over one coat of primer including preparation of old surface after complete removal of existing treatment all as specified and directed by Engr in Charge.

S&F 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including two or more coats plastic emulsion paint to give an even shade on ceiling with one coat wall care putty work complete with designer ceiling (with part ply,laminate and cove) as directed Note:- Fillets, metal frame work and GI wire mesh measured and paid separately

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre etc complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F in repairs 15mm two in one Bib taps with flange, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified.Make:Jaquar Cat No-FON-40041/ORP10041PM or equvalent Make in Kolher/Johnson/Prayag

S&F in repairs premium quality 15mm bib tap with wall flange chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified of make- Jaguar Cat No-FON-40081/OPP5037PM or equvalent Make in Kolher/Johnson/Prayag

S&F in repair soap Dish Make-Jaguar Code No- CAN-1137/AKP-35731P or equvalent Make in Kolher/Johnson/Prayag

S&F in repair Toilet paper roll holder with flap of Make-Jaguar Code No- AKP-35753P or equvalent Make in Kolher/Johnson/Prayag

S & F in repairs single lever basin mixture with popup waste system with 450 mm long braided hoses all as directed Make: Jaquar-LYR-38051B/ORP-10011BPM or equvalent Make in Kolher/Johnson/Prayag

S & F in repairs table top basin of size 170x835x455 mm/565X425X140mm of whitecolour complete all as specified and directed make-Jaquqr Cat No-KUS-WHT 35935/ JDS-WHT-0547 or equvalent Make in Kolher/Johnson/Prayag

S&F in repairs 15mm bore hand shower (Health Faucet) with 8 mm Dia, 1 Meter Long flexible tube & wall hook of make: Jaguar Cat No- ALD -573/ALD 577 or equvalent Make in Kolher/Johnson/Prayag

S&F in repair Towel rail of 600 mm long with brackets etc complete all as specified and directed Make-Jaguar Cat no-AHS-1507 or equvalent Make in Kolher/Johnson/Prayag

S&F in repair urinal with electronic sensor,wall hung,back inlet,,built in waste outlet with water seal of size 400mmx330mmx630mm complete, Make-Somani(FIGARO), complete all as directed.

S&F in repair 8 mm thick curved shape urinal partition with frosted glass chrome finish of size-900mmx450mm etc complete all as specified and directed Make-Jaguar or equailent or equvalent Make in Kolher/Johnson/Prayag

S&F in repair glass shelf of 600 mm long with cp bracket etc complete all as specified and directed Make-Jaguar Cat no-CAN-1171N or equvalent Make in Kolher/Johnson/Prayag

S&F in repairs CP connection 15mm dia and 450mm long with two Nos of brass checknuts and washers complete.Make Jaguar cat no-ALD-805B or equivalent Make in Kolher/Johnson/Prayag

S&F PVC Gratings size 125 mm dia complete all as specified & directed.

S&F in repair angly stop cock with wall flange 15 mm dia chromium plated, screwed down, high pressure, screwed both ends for 15mm bore iron pipes or for unions, all as specified and as directed Make-Jaguar Cat no-CON 059KN or equvalent Make in Kolher/Johnson/Prayag

Taking up or down 15mm bore water tubing and connection building , cleaning for refixing all as specified and as directed by Engineer In Charge.

Taking up or down 20 mm bore water tubing and connection building , cleaning for refixing all as specified and as directed by Engineer In Charge.

M&L for Cutting chases in stone masonry walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth etc complete all as specified and directed

M & L 15 mm dia GI pipe medium grade with all fittings and fixed to wall /laid in floor complete all as specified and as directed by Engineer in Charge.

~ditto~ all as per item No 36 above but 20 mm dia etc complete all as directed and specified .

M&L GI tube medium grade,25mm dia with all fittings and fixtures laid in trenches/wall/roof etc. complete all as directed and specified .

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed with wall including necessary fixing cleats/ clamps complete all as specified and directed.

S&F in repairs PVC bends of 110 mm dia complete all as specified and directed.

S&F in repairs PVC bends of 75 mm dia complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in CM 1: 6 , complete in walls all as specified.

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

M&L for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for floor including finishing the surface even and fair complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, rough finish surfaces for receving top layer complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed cement mortar (1:6) and pointed with white or Coloured cement to match complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm on vertical surfaces for skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering backing coat in cement mortar (1:4) etc complete all as specified and directed.

M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including a 15 mm thick screed bed in cement mortar (1:6).all as specified and directed.

M & L of Machine pressed precast concrete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade etc complete all as specified and directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed.

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound, grade 'A' all as specified and directed.

M & L for Preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls etc complete all as specified and directed.

M & L for Preparing new plastered surfaces and applying Two coats of oil bound distemper over a coat of primer on surfaces of walls etc complete all as specified and directed.

M & L for Preparing new plastered surfaces and applying three coat of white wash on surfaces of walls etc complete all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of defence area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination etc complete all as specified and directed.

Taking down door/ window shutters of any description exc 1 sq. m and n.exc 4 sqm resecuring or for easing & adjusting etc complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed.

S&F 125mm long Butt hinges, medium weight, cold rolled mild steel etc complete all as specified and directed.

S&F for 200mm aluminium anodised barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

S&F 150mm Aluminium handles, cast type anodised etc complete all as specified and directed.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating as specified and directed.

M&L Preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxied priming etc complete all as specified and directed.

Surface excavation n exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions and as direction by Engr in Charge (WPC shall be measured & paid separately). .

Supply only liquid water proofing compound of approved quality.

M & L for PCC type D2 ,1:4:8 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) as in flooring, all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils in soft/loose soil etc complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed all as directed by Engr in charge

Cutting holes in brick walls exc half brick but n. exc full brick wall in cement mortar for inserting pipes and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required etc complete all as specified and directed.

M & L for plain cement concrete (1:3:6), type C1 (using 20mm graded stone aggregate) as in bed blocks, coping incl necessary form work complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and direction by Engr in Charge.

M&L RCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for shelves and similar articles incl necessary form work set in CM 1:4 all as specified. (Reinforcement will be measured & paid separately)

M & L for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore etc complete all as specified and directed.

S&F 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointed as specified and directed by Engr-in-Charge.

M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe complete all as specified and directed by Engr-in-Charge.

M&L for stainless steel grade 304, 16 guage grease trap of size 1.50x0.60mx0.90m locally available with partition and sludge removal basket on inlet side partiton of OGT capacity 638 ltrs, Grease capacity 190 kgs the overall weight of heavy duty grease trap shall not be less than 115 kg per each including necesary inlet and outlet pipe of suitable sizes to match the existing disposal system etc complete all as specified and directed by Engr-in-charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and directed

Supply and fixing 9 watt LED wall light for ambient lighting made from engineering grade polymer with prismatic diffuser, aethetic design, suitable for LED bulbs etc complete all as specified and directed Cat part No SZWWGBL009-B22

Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr in depth or part thereof in hard/dense soil and getting out for laying of underground cables and foundation for poles etc complete all as specified and directed

M&L for removing excavated materials n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directed

M&L for stainless steel Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc complete all as specified and directed for following sizes

80 mm dia

25 mm dia

Material & Labour and testing galvanised steel water tubing IS-1239 marked, medium grade, incl all necessary pipe fitting / acessories like sockets,unions, tees, elbows etc laid in trenches/walls/floors, of the under mentioned sizes:-

80 mm dia

25 mm dia

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm dia bore complete all as speciffied and directed.

Supply and fix CI sluice valve of pressure Class PN - 1.6 flanged, 80 mm dia and drilled at both ends with ISI mark, having steel spindle and gunmetal rings including wheel for operation all as specifed and all jointing materials, bolts, nuts, washers, etc, all as specifed and as directed

S&F Rubber or fibre board gaskets for flanged suitable for 80/25mm dia etc complete all as specified and directed

S&F stainless steel Bends, Tapers, Tee pieces (single & double branch) any type and angle/ radius and straight connecting pieces but all ends flanged etc complete all as specified and directed

S&F stainless steel Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end taperins as bell mouth etc complete all as specified and directed

Supply and fixing rigid non-metalic PVC conduit size 32mm exclusive of boxes (junction/terminal)but inclusive of all tees, bends, elbows, reduces, bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc complete all as specified and directed

Supply and fix water proofing cable size of 1.5 sqmm etc complete all as specified and directed

M&L and testing cable XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core confirmign to IS 7098 (Part I) of 1988 all as specified and directed by Engineer - in- charge

S&F stainless steel LED ring light RGB 27 watt including driver housed in stainless steel 304 grade water proof case connected to suitable size pipe of fountain incl necessary electrical connections etc complete all as specified and directed by Engineer - in- charge

M&L for plate earthing for substation equipments (Transformer, lighting arrestor and feeder pillar box) complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6.0 mm thick buried directly in ground vertically ( in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcaol dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 32 x 6 mm bolted (with GI nuts, bolts, & check nuts) and riveted to earth plate at one end and connected to metallic body of HT/LT equipments etc at the outer, earth strip encased in and incl 50 mm bore og GI grade pipe with all fitting from top of electrode to body of equipments fixed with and incl 25 x 6 mm flat iron clamps, bolts, nuts and washer and also providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 5 of SSR Pt-I. The scope of work also include necessary excavation and earthwork.

M&L for 3 core 6 sqmm Flat cable wiringsqmm of FRLS PVC insulated & PVC Sheathed for submersible pump motors 1100 volt Confroming to IS 694 copper conductor all as specified and directed by Engr-In-Charge. Make: Plaza/Havells/ Polycab

S&F openwell submersible Pump HP 65x80 (Suction & Del) mm Head Range 33-54m along with including preparation platform with motor cover and necessary electrical connetions all as specified and directed by Engineer - in- charge

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.5 sqmm 1100 volts grade in and including in stove enamelled steel conduit Pipe ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /steel junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light/exhaust fan controlled by one single pole 6 Amps switch

Supply and fixing Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size etc all as specified and directed by Engineer - in- charge

Supply and fixing flame proof industrial Exhaust fan of size 300 mm high speed 900/1440 RPM, aluminium grey colour, 230 volts heavy duty single phase complete with all accessories with pre wired and including connecting up with three core flexible copper conductor cable with suitable size etc all as specified and directed by Engineer - in- charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) etc all as specified and directed by Engineer - in- charge

M & L for PVC copper conductor twin twisted flexible wire 2 core for using of ceiling fan connection etc all as specified and directed by Engineer - in- charge

M/s BHOOMI ELECTRICALS