Construction of various 220KV and 132KV transmission lines associated with 220KV GSS Karnu on turnkey basis

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Sub station structure

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 70 kN

(i) porcelein Long Rod Insulator - 70 kN

(i) Disc Insulator - 120 kN

(ii) porcelein Long Rod Insulator- 120 kN

Zebra equivelent to AL-59 conductor

Hardware Fittings for Zebra equivelent AL-59 conductor

Single Suspension H/W fittings for Zebra equivelent AL-59 conductor

Single Tension H/W fittings for Zebra equivelent AL-59 conductor

Double Suspension H/W fittings for Zebra equivelent AL-59 conductor

Double Tension H/W fittings for Zebra equivelent AL-59 conductor

Single Suspension H/W fittings with performed armour rod for pilot string for Zebra equivelent AL-59 conductor

T- Clamp Zebra-Zebra for Zebra equivelent AL-59 conductor

PG Clamp Zebra-Zebra for Zebra equivelent AL-59 conductor

Bolted Type S/T H/W for Zebra equivelent AL-59 conductor

Bolted Type S/S H/W for Zebra equivelent AL-59 conductor

Accessories for Zebra equivelent AL-59 conductor

Mid Span Compression Joint for Zebra equivelent AL-59 conductor

Repair Sleeve for Zebra equivelent AL-59 conductor

Preformed Armour Rod for Zebra equivelent AL-59 conductor

Vibration Damper for Zebra equivelent AL-59 conductor

G.I. Earth wire 7/3.15 MM

Strain Assembly for Earth wire 7/3.15 mm with copper earth Bond

Suspension Assembly for Earth wire 7/3.15 mm with copper earth Bond

Vibration Damper for Earth wire 7/3.15 mm

Mid Span Compression Joint for Earth wire 7/3.15 mm

Repair sleeves for Earth wire 7/3.15 mm

Any Other item required for successful completion of work

Note: ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered.

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard Rock (with blasting subject to permission or without blasting)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(iii) 1:2:4 Mix

(iv) 1:1.5:3 Mix

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

Erection of substation structures including leveling, setting of stub & Tighting,Punching of Nuts& Bolts and tack welding upto beam level as per specification.

CONDUCTOR STRINGING: Stringing of Zebra equivelent AL-59 conductor including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Earthwire Stringing :- (A) Stringing of galvanised steel stranded wire including laying,jointing & tensioning, clamping,clipping and fixing vibration damper and earth bond etc.

(i)One No. 7/3.15 mm galvanised wire

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thik nominal size aggregate

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 70 kN

(i) porcelein Long Rod Insulator - 70 kN

(i) Disc Insulator - 120 kN

(i) porcelein Long Rod Insulator - 120 KN

Zebra equivelent to AL-59 conductor

Hardware Fittings for Zebra equivelent AL-59 conductor

Single Suspension H/W fittings for Zebra equivelent AL-59 conductor

Single Tension H/W fittings for Zebra equivelent AL-59 conductor

Double Suspension H/W fittings for Zebra equivelent AL-59 conductor

Double Tension H/W fittings for Zebra equivelent AL-59 conductor

Single Suspension H/W fittings with performed armour rod for pilot string for Zebra equivelent AL-59 conductor

T- Clamp Zebra-Zebra for Zebra equivelent AL-59 conductor

PG Clamp Zebra-Zebra for Zebra equivelent AL-59 conductor

Bolted Type S/T H/W for Zebra equivelent AL-59 conductor

Bolted Type S/S H/W for Zebra equivelent AL-59 conductor

Accessories for Zebra equivelent AL-59 conductor

Mid Span Compression Joint for Zebra equivelent AL-59 conductor

Repair Sleeve for Zebra equivelent AL-59 conductor

Preformed Armour Rod for Zebra equivelent AL-59 conductor

Vibration Damper for Zebra equivelent AL-59 conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre)

FODP 48F : Indoor type rack mounted with FCPC coupling and pigtails

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre FOAC

Any Other item required for successful completion of work

Note: ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered.

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard Rock (with blasting subject to permission or without blasting)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(ii) 1:2:4 Mix

(iii) 1:1.5:3 Mix

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of Zebra equivelent AL-59 conductor including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thik nominal size aggregate

Installation of OPGW

Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE

Installation Hardware set for above 48 Fibre OPGW cabling including of al cable fittings and accessories exept joint Box

JOINT BOX (48 FIBER) OPGW CABLE

FODP 48F : Indoor type rack mounted with FCPC coupling and pigtails

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre FOAC

Any Other Item

Note: ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered.

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 70 kN

(i) porcelein Long Rod Insulator - 70 kN

(i) Disc Insulator - 120 kN

(i) porcelein Long Rod Insulator - 120 kN

Hardware Fittings for ACSR Panther Conductor

Single Suspension H/W fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Suspension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSR Panther Conductor

Preformed Armour Rod for ACSR Panther Conductor

Vibration Damper for ACSR Panther Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre)

FODP 48F : Indoor type rack mounted with FCPC coupling and pigtails

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre FOAC

Any Other item required for successful completion of work

Note: ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered.

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

(ii) Hard Rock (with blasting subject to permission or without blasting)

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(ii) 1:2:4 Mix

(iii) 1:1.5:3 Mix

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(D)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thik nominal size aggregate

Installation of OPGW

Stringing of 48 Fiber (DWSM) OPGW FIBRE OPTIC CABLE

Installation Hardware set for above 48 Fibre OPGW cabling including of al cable fittings and accessories exept joint Box

JOINT BOX (48 FIBER) OPGW CABLE

FODP 48F : Indoor type rack mounted with FCPC coupling and pigtails

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre FOAC

Any Other Item

Note: ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner. *** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered.

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

Kintech Synergy Private Limited (BID ID -3332990)

Cabcon India Limited (BID ID -3357445)

LNB Renewable Energy Ltd. (BID ID -3316901)

Kanohar Electricals Limited (BID ID -3357631)

Vikran Engineering Limited (BID ID -3360330)

Vikran Engineering Limited (BID ID -3360330)

Cabcon India Limited (BID ID -3357445)

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

SALASAR TECHNO ENGINEERING LIMITED (BID ID -3327582)

Kanohar Electricals Limited (BID ID -3357631)

Kintech Synergy Private Limited (BID ID -3332990)

LNB Renewable Energy Ltd. (BID ID -3316901)

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

Kanohar Electricals Limited (BID ID -3357631)

Cabcon India Limited (BID ID -3357445)

Vikran Engineering Limited (BID ID -3360330)

SALASAR TECHNO ENGINEERING LIMITED (BID ID -3327582)

Cabcon India Limited (BID ID -3357445)

Vikran Engineering Limited (BID ID -3360330)

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

Kintech Synergy Private Limited (BID ID -3332990)

Kanohar Electricals Limited (BID ID -3357631)

SALASAR TECHNO ENGINEERING LIMITED (BID ID -3327582)

LNB Renewable Energy Ltd. (BID ID -3316901)

Kanohar Electricals Limited (BID ID -3357631)

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

Vikran Engineering Limited (BID ID -3360330)

Cabcon India Limited (BID ID -3357445)

SALASAR TECHNO ENGINEERING LIMITED (BID ID -3327582)

Cabcon India Limited (BID ID -3357445)

Vikran Engineering Limited (BID ID -3360330)

R S INFRAPROJECTS PVT LTD (BID ID -3357608)

Kintech Synergy Private Limited (BID ID -3332990)

Kanohar Electricals Limited (BID ID -3357631)

SALASAR TECHNO ENGINEERING LIMITED (BID ID -3327582)