REPAIR/REPLACEMENT TO DOORS, WINDOWS, VENTILATORS, CUPBOARDS, CLEANING/REPAIR OF SEWAGE LINE, MANHOLE, SEPTIC TANK, SOAKAGE WELL AND OTHER CERTAIN B/R WORKS AT AF STN MCC BASANT NAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed .

All as per item No 02 above but except bricks.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4), complete all as specified and directed .

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick Work or concrete surfaces including finished even and smooth without using extra cement, complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on brick work or concrete surface, finish even and smooth (without using extra cement), incl WPC as per user manual, complete all as specified and directed .

M&L for rendering 10mm thick in cement mortar (1:3) over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth without using extra cement, complete all as specified and directed .

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper on wall over a coat of primer including one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed .

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance including one layer of 3mm thick wall care putty on new plasterd surfaces and obtain smooth finish using sand paper, complete all as specifed and directed.

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper on ceiling over a coat of primer including one layer of 3mm thick wall care putty on new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed .

M&L for two coat of acrylic smooth exterior emulsion paint over one coat of acrylic primer including one layer of 3mm thick wall care putty for exterior/interior on wall/ceiling surfaces new plastered surfaces and obtain smooth finish using sand paper, complete all as specified and directed. Note : Colour and make as approved by EIC/GE

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including floor finishes/tiling work and disposal of debris, complete all as specified and as directed.

M&L for 50 mm thick, PCC, 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L for 75mm thick, PCC, type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 60 mm thick machine cut precast concrete coloured inter-locking paver block with grey cement and pigment,(M-35) grade any colour as approved by EIC /GE, complete all as specified and directed

All as per item No 16 above but except tiles.

M&L for 80 mm thick machine cut precast concrete coloured inter-locking paver block with grey cement and pigment,(M-40) grade any colour as approved by EIC /GE, complete all as specified and directed

M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

M&L for machine pressed chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in cement mortar (1:6) bedded and jointed in neat cement slurry, including dismantling, complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor/sub base finishes, complete all as specified and directed.

M&L for premium quality non-skid, ceramic, coloiured tiles, 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, including 15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6), in floors including dismantling tiles etc, complete all as specified and directed.

All as per item No 22 above but area of each tile exe 0.11 sqm but n.exe 0.18 sqm, in floors etc.

M& L for premium quality Glazed ceramic jointless light/coloured tiles of size 300mmx450/350x600mm, thickness not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar (1:4), including dismantling tiles etc, complete all as specified and directed. Note:- shade & design as approved by EIC/GE.

M&L for premium quality coloured Non Skid Ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, including 15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6) in floors incl dismantling tiles etc, complete all as specified and directed.

M&L for Fully Vitrified tiles, 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc. set and jointed in neat cement slurry over & including 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and incl dismantling tiles etc complete all as spd and directed. Note:- Colour and design as per EIC/GE

All as per item No 26 above but on vertical surfaces over & including 10 mm thick plinth in CM 1:4.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L for Granite, 20 mm thick (of any type ) (table runned and polished ) in floors steps , jambs, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for rounded to edges of stone slabs one edge , such as in steps, cooking platform , and other similar situtions, compelete all as specified and directed.

S&F in repair Vitreous china squatting pan of Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 using brick bats and finishing the top surfaces to match with the existing flooring, complete all as specified and directed.

S&F for Vitreous China wash down water closet pan (pedestal pattern) with trap, white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain and flushing pipe, fixed in repairs, complete all as specifed and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F for 15 mm bore Twin one angle valve/ bib tap cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union, complete all as specified and as directed

S&F CP jet for EWC along with pvc connection, complete all as specified and directed.

S&F for Toilet paper holder, stainless steel, fixed with and including chromium plated brass screws and wooden/plastic cleats on walls, complete all as specified and directed.

S&F for Health faucet, brass, CP with 8mm dia 1.2 mtr long flexible pipe and wall hook fixed with brass chromium plated screws, complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F for Vitreous China wash basin (Pedestal pattern), White, flat back, size 550x400 mm incl brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified and directed.

S&F in repair 15mm bore, swan neck, pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore, CP, brass, centre hole mixer without pop up waste system for mixing hot and cold water screwed down for iron pipe for WHB, complete all as specified and directed.

S&F in repairs Towel Rail 600 mm long of PTMT fixed with and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms) complete all as specified and directed.

S&F in repair for liquid soap container of PTMT fixed with and including CP brass screws and wooden/plastic cleats, complete all as specified and directed.

S & F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed.

S&F in repair vitreous china urinals, half stall type (635x450mm), complete including providing and fixing , bedding urinal against wall in cement mortar (1:2), pointing around urinal back in cement, grating and union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap & waste pipe, complete all as specified and directed.

S&F in repair for urinal partition made up of frosted glass of 8mm thick, size 900x450 mm(approx), complete allas specified and directed. Note:- Shape of partition as per the direction of EIC.

S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed .

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed .

S&F for Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms), complete all as specified and directed.

S & F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs stop valve/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15 mm bore Stop cock, concealed, long shank, chromium plated, fancy type, screwed down high pressure with crutch or butter fly handle, complete all as specified and directed.

S&F in repair 15mm bore wall mixer with provision for overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges, complete all as specified and directed.

S&F shower roses, brass, chromium plated with or without swivel joints 200mm size incl fixing to steel pipe complete all as specified and directed.

S & F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.

S&F in repair PVC connections 60cm long superior quality with PTMT nut on both side, complete all as specified and directed.

S&F in repair 125mm size, CP, grating, round type, complete all as specified and directed.

S&F stainless steel pegset of six suitable size of length complete etc, complete all as specified and directed.

S&F in repair GI tubing 15mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors etc including cutting chases in brick wall pinning in making good in cement mortar (1:3) to facings where required, including taking down old U/S GI tubing, complete all as specified and directed.

S&F in repair GI tubing 20 mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors, includinh taking down old U/S GI tubing, complete all as specified and directed.

S&F in repair GI tubing 25 mm bore 'medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors, includinh taking down old U/S GI tubing, complete all as specified and directed.

S&F in repair 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, including taking up/down old pipe with all fittings, complete all as specified and directed.

All as per item No 65 above but laid in trench or in floor

S&F for 110mm bore, PVC, Gully Trap setting / jointed with solvent cement, complete all as specified and directed. .

S&F 110 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, including taking up/down old pipe with all fittings, complete all as specified and directed.

All as per item No 69 above but laid in trench or in floor

S&F 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down chowkhats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

M&L for pressed steel frames of size 105mmx60mm for doors with one or more rebates fabricated out of 1.25mm thick mild steel sheets including necessary fixing lugs, butt hinges (100mm medium weight-03 Nos), lock strike plate with and including filling of hollow portion in PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate and making good the existing surface in cement mortar (1:6), complete all as specified and directed.

All as per item No 77 above but size of frame 125mmx60mm for doors.

S&F for 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and Grade 1 quality, 1mm thick any type of colour sunmica face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing incl 3Nos- 100mm Aluminium hinges for each shutter, complete all as specified and directed .

S&F Aluminum anodized frame fo doors, windows, ventilators powder coating (Min thickness of powder coating 50 micron) with one or more rebated including jointing cleats for fixing etc complete all as specified.

M&L for anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) door shutter, aluminium section weighing not less than 0.55kg/RM including necessary 4.8mm th sheet glass ordinary quality / frosted glass or ACP sheet incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts,1xdoor stoper,1xHydralic door closer with each shutter any type incl taking down, complete all as specified all as specified.

M&L for anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) window and ventilator shutters, aluminium section weighting not less than 0.55kg/RM incl necessary 4.8mm th sheet glass ordinary quality glass/ frosted incl joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 x 150mm aluminium handles, 3 x 100mm hinges aluminium, 2 x 150mm Aluminium tower bolts, complete all as specifiedd and directed.

M&L for aluminium Anodized powder coated (Minimum thickness of powder coating 50 micron) fixed frame of partiton or fixed window / ventilator, aluminium section weighting not less than 0.55kg/RM including 4.8mm thick sheet glass oridinary quality ' frosted glass or ACP sheet joining with rubber beading , aluminium snap beading, complete all as specifed & directed

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples, complete all as specified and directed

S&F 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair, complete all as specified and directed.

S&F 10 -12 mm thick glass door, frosted with certain logo, fixed with floor spring, fixed on floor with two no's stainless steel handle of 300mm on each leaf and fixed partition arrangement including necessary provision to lock the door, completed all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed.

S&F in repair 3mm thick sheet glass, ordinary quality and with oil putty in Square n. exc 0.5 sqm in each pane including hacking out old broken glass from metal frame including punching or drilling out old glazing pins/spring clips and glazed with oil putty, complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F butt hinge, Stainless steel 100mm long, complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S&F for 250mm long aluminium alloy, anodised, sliding door bolt of 16mm dia with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections, complete all as specified and directed.

S&F aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, 300 mm long and fixed, complete all as specified and directed.

S&F in repair, 150 mm ordinay rat tail rod pattern springs including roller and rabber plate fixed to chowkhats in repairs including necessary welding if required, complete all as specified and directed.

S&F in repair 300mm long, Brass, ordinary rat tail rod pattern springs including roller and roller plate complete including taking down old U/S, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm, complete all as specified and directed.

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed .

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for 18mm thick water proof solid high gloss UV coated Action Tesa Board smooth finish both sides of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

S&F extruded brass handle, fancy type as approved by the GE, polished, 150mm long (ISI marked), complete all as specified.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30mm, complete all as specified and directed.

S&F aluminium Fanlight catch with 14mm catch and fixed suitable for any shutters, complete all as specified and directed.

S&F 40 mm dia cupboard knobs fixed with nut, screw and washer of brass,bright finished, complete all as specified and directed.

S&F in repair for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing pipes with accessories complete all as specified and directed. Note: the cost of brackets and knobs is deemed to be included in the quoted rate.

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white including roundening the edge of stone, complete all as specified and directed.

Easing and Adjusting without taking down any type wooden shutters exc 1 Sqm but n.exc 2 sqm each and refixing in same opening after replacement of defective portions such as wire cloth, beading, handles, hinges, locking arrangements complete all as specified and directed. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F in repair of door closer, hydraulically regulated, design No 3, universal type, suitable for door shutters of 851 to 1000m in width and weifht between 61 to 80 kg etc, complete all as specified and as directed

S&F in repair 2nd class hard wood beading straight (any size) for glazed/gauged joinery, renewed incl mitered etc complete all as specified and directed

M&L for repairs to sliding door bolt, hinges, pintel, locking arrangment, spike, roller, roller rails etc of steel gate/Wicket gate including welding /riveting to bring the steel gate /wicket gate in service condtions etc complete all as specified and directed

S&F ventian blind for window including necessary item s required for fix to wall complete all as specified and directed.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specifified and as directed.

S&F Floor door stopper of aluminium alloy body double and tongue annodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

S&F in repair 4mm thick figured glass pane fixed in window shutter/ventilators including necessary beading/wooden beading andoil putty, complete all as specified and directed.

Cleaning /removal of blockage 150 mm bore SWG pipes of depth not exc 1.50 mtr with mechanical process including removing RCC manhole covers and refixing the same as before, complete all as specified and directed.

Cleaning /removal of blockage 150 mm bore SWG pipes of depth exc 1.50 mtr but not exc 3.00 mtr with mechanical process including removing RCC manhole covers and refixing the same as before, complete all as specified and directed.

Dewatering/desilting of existing manholes of any size depth and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (mechanical system or using suction pump wherever required up to any depth )and including removing RCC manhole Covers and refixing the same after making the manhole fully functional, complete all as specified and directed.

Dewatering/desilting for the septic tank of any capacity exc 1.50 m and n.exc 4.5 m deep solid/semi-solid matter of silt residue both organic or inorganic in nature ( mechanical system or using suction pump where ever required up to any depth by working under foul conditions and disposal of the same out of MoD area, complete all as specified and directed. Note -: The Septic tank shall be measured more than one time as per requirment and directed by Egnr-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in soft or loose soil for shafts, wells, drains, manholes etc n exc 10Sqm on plan for sewage line & foundation etc, complete all as specified and directed.

All as per item No 128 above but exceeding 1.5 M depth and not exceeding 3 M for foundation, etc and getting out in Soft/ Loose soil.

All as per item No 128 above but exceeding 3.0 M depth and not exceeding 4.50M for foundation, etc and getting out in Soft/ Loose soil.

Demolition and breaking up drain pipes 100mm dia ( Salt Glazed ware, AC or reinforced concrete) set in cement mortar including PCC bed and haunching and removal of debris outside the MoD land, complete all as specified and directed.

Demoltion and breaking up existing sewage(SWR/ AC pipes and the like), 150mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m complete all as specified and directed.

Demoltion and breaking up existing sewage (SGSW / AC pipes and the like), 200mm bore set in cement mortar and removing demolished material to a distance exc 50m and n exc 100m complete all as specified and directed.

S&F 110 mm PVC (SWR ) , pipes single socketd , in any length with rubber ring joints , laid in trenches or in floor, complete all as specified and directed.

M & L for 150mm bore, reinforced cement concrete pipe class NP-3 laid and jointed with collars including fittings of same grade in trenches at any depth including jointing and testing, complete all as specified and directed. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

M & L for 200mm bore, reinforced cement concrete pipe class NP-3 laid and jointed with collars including fittings of same grade in trenches at any depth including jointing and testing, complete all as specified and directed. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

M & L for cement concrete 1:3:6 type C-2 using 40 graded stone aggregate as in bed to drain pipes of 100 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in bed to drain pipes of 200 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

S&F in repair for precast factory made reinforced cement concrete manhole cover (Ist quality) including groove and hook arrangement for lifting and placing in position and sides covered by 2mm thick MS sheet medium duty (size and thickness of the cover will be intimated by the Engineer-in-Charge), complete all as specified and directed.

S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick rectangle in shape upto 01 sqm area each with hole for drain, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil, complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) Type B-1, (using 20mm graded crushed stone aggregate), as in copings, kneelers, apex stones,bed plates, including weathering, slightly rounded /benching or chamfered angles and throating,, complete all as specified and directed.( Rates include for use of formwork)

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 100mm dia pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 150mm dia pipe complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required, 200mm dia pipe complete all as specified and directed.

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 150x150mm for drain pipes, complete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in surface channels, drains and bed of manhole, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete, complete all as specified and directed.

M&L for loose filling with broken bricks aggregate of gauge 80 to 150mm in soakage pits, soakage wells, complete all as specified and directed.

M&L for loose filling with broken bricks aggregate of gauge 40 to 80mm in soakage pits, soakage wells, complete all as specified and directed.

S&F in repair for 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors including taking down old pipe, complete all as specifed and directed.

S&F in repair 100mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc, including taking down old U/S pipe, complete all as specified and directed.

S&F in repair for 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints,laid in trenches or in floors etc complete including taking down old pipe, complete all as specifed and directed.

S&F in repair 75mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls etc, including taking down old U/S pipe, complete all as specified and directed.

S&F 100mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 75mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

S&F 100mm dia branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc, complete all as specified and directed.

S&F 75mm dia branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches/ Tee etc, complete all as specified and directed.

S&F 75mm dia. Cast Iron Vent Cowl, complete all as specified and directed.

S&F 100mm dia. Cast Iron Vent Cowl, complete all as specified and directed.

S&F 75mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specifed and dirtected.

S&F 100mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for 110mm bore PVC bends/junction with access door any radius, complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

Removing debris/excavated material to a distance exceeding 1.5KM but not exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

Taking down existing roof treatment of any description and any type, complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, including Brushing neat cement slurry with 3.0kg of cement per sq. metre etc, complete all as specified and directed.

M&L for preparation of roof surfaces/sunken portion & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced wih polyster non woven fabric (weight not less than 150 gms/sqm) land on primed surface by forced application, joints to be tourched hot and width of overlaps not be less than 150 mm, complete all as specified and directed.

M&L for PCC (1:2:4) nominal mix, type B-0, using 12.5mm graded stone aggregate as in roof padding and surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape, complete all as specified and directed.

Removing plants / shrubs duct wall, junction with roots using herbicide chemical of existing brick or concrete for multistoried building at any storeyed and any height and match the surface with existing surface using cement mortar in (1:3) , complete all as specified and directed.

S&F for triple layer, rotational moulded polyetheylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in any position, GI nipple and any fitting ,etc including dismantling existing water tank, complete all as specified and directed.

S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 210 gms/ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F 20mm bore Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions and fixed in repairs, complete all as specified and directed

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed .

M&L for PVC hollow wall panelling 5 to 8 mm thick on ceilling or wall with necessary frame work in POP Design and any colour approved by Engr-in-charge, inclusive of fixing on to wall/ceiling including moulding end caps fixed with PVC sleeves and screws as required at site, complete all as specified and directed

S&F for factory made Solid WPC Door frame size ( 100mm X 65mm Single Rebate ) made from 100% LEAD FREE (single extruded process) material with density 780 kg/cm3 & Manufactured by an ISO: 9001-2015 certified company, all as per specification drawings, including all necessary assories as directed by the Engineer-In-Charge. The door frame should be Water Proof , Termite Proof , Fire Retardent and having excellent screw holding capacity.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm in double ribbet comprising of virgin PVC polymer of K value 58-60(Suspension Grade),calcium carbonate and natural fibers (wood powder/rise husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frames density of 750 kg/cum ,screw withdrawal strength of 2200 N(face) & 1100 N (Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS Hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S hold fast/lugs or SS Dash fasteners are included in this with this item complete).

S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 59-60 (SuspensionGrade) ,calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge),minimum compressive strength 50 N/mm2,modulus of elasticity 850 N/mm2 and resistance to spread of flames of class A category with property of being termite /borer proof,water /moisture proof and fire retardant WPC to be laminated with PVC foil of minimum14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screw,all as per direction of Engineer-in-Charge. Note: Satinless steel butt hinges and necessary SS Screw shall be paid separately.

S&F Factory made solid panel PVC sketlton door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with. heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Single Side Prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10mm 900 bent edge for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing.

S&F for mild steel framed work as in grill, guard bars etc with ends of bars/FI shoulders and or riveted or forged in to spikes, framed guard bar and similar works confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for and disposal of debris to outside the station, complete all as specified and directed by Engr-in-charge.

M&L for Form work to rough finished flat surfaces of chullah hoods, chajjas, troughs and similar item s including edges, complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified and directed.

All as per item No 189 above but 6 to 8 mm dia and over and including in stirrups, spacers and binders complete all as specified and directed.

M&L reinforced cement concrete, Nominal mix, M-25 using 20mm graded stone aggregates in chajjas complete all as specified and directed.

PRAHLAD NARAIN KOLI (BID ID -3364916)

SAGAR ENTERPRISES (BID ID -3378858)

M/S Parshant Associates (BID ID -3370332)

Singh Associates (BID ID -3378321)