SPECIAL REPAIRS TO ROAD FROM OTM MD ACCN KILKARI PARK ETC UNDER GE DIPATOLI

Amount

Repair to pot holes any depth n.exceeding 1 Sqm each including sweeping free from dust and mud, water scoring sunken surface in roads, paths, etc cutting around edges to at least 25mm in depth, making ood by filling screened and graded road metal watering and well ramming (incl supply of orad metal) complete all as specified and directed.

Prepairing existing black top surfaces with wire brushes for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etcand applying prime/tack coat with paving bitumen grade( V-30) grade@ of 5 Kg per 10 Sqm of surface complete all as specified and as directed.

Material and Labour for bitumious macadam not exceeding 75mm thick (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade ) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed .

Material and Labour for semi dense bitumious concrete 40mm thick (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-30 grade ) @ 5.5% by wight of total mix and hydraulic lime fillr, rolled the surfaces by using 8 to 10 tonne capacity power roller and compacted to required camber and gradient complete all as specified and as directed.

Providing and marking broken centre line/side lines on road pavement and the like of any description and width as directed by the Engr-in-Charge with thermoplastic paint hot applied with machine conforming to BS 3262 and according to the specification laid down by IRC MOST (Ministry of surface transport) specification 2001 (4th revision) complete all as specified and directed.

Material and Labour for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimunm 2.5mm thick single coat as in centre line and edge line road marking in white/yellow (approved colours) colour & shade of 150/100mm width using 'HOT MARK' thermoplastic modern propelled road marking machine incl all ingredients such binder, glass beads, titanium dioxide, calcium carbonate inter fillers thermoplastic requirement for glass beads shall be as per table No. 800.4 of MOST specification incl spraying glass beads etc all as per manufacturers instructions and complete all as specified and directed.

Supply and fixing for cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground evel) all as specified and directed.

Material and Labour for 100 mm thick cement concrete 1:4:8 type D-2 (40mm graded stone aggregate ) as in sub base of pathway & parking area complete all as specified and directed

Material and Labour for Machine pressed precast concrete interlocking paver block any shape and size coforming to IS 15658 - 2006 of 60 mm thick using rubber moulded casting with glosy finish with grey cement and pigment M-35 grade of concrete complete all as specified and directed.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and Labour for plain cement concrete,1:2:4 (20 mm graded crushed stone aggregate) type B-1 as in coping, bed block , water trought and similar works including rounding, chamfered and throating complete all as specified and directed.

M/S ABHAY KUMAR AND BROTHERS

Modernage Constructions Pvt. Ltd.

M/S Hind Constructions

M/S OMANIA ENTERPRISES

M/S SHAMBHU SHARAN SINGH