Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.7 LAccepted-AOC SHIV BARI ROAD NEAR KASUMAL HOTEL BIKANER 334003 RAJASTHAN | BIKANER | BIKANER | RAJASTHAN | 334003 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹54.4 L+₹5.1 L (10.3%)Rejected-Finance | L2 | Rejected-Finance Due to not lowest bidder |
Tender Value
₹46.6 L
EMD Value
₹93,240
Closing Date
10 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER Rajasthan
PROVN OF MAIN POWER SUPPLY FOR MW TOWER TWO TOWER ACS PROVN OF TOILET AND EXTERNAL ELECTRICITY IN GD ROOM OF SENTRY POST AND ADDN/ALTN OF SHADOWLESS LIGHT FITTINGS WITH EMERGENCY POWER UNIT AND BATTERY BACK UP AND SPL REPAIR TO CERTAIN BLDGS IN OLD L
2023_MES_621295_3
GE (N) BKN-TOKEN/57/2023-24
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (N) BIKANER
As per Tender Documents
6 documents required · 6 mandatory
₹500
GE (N) BIKANER
₹93,240
Yes
19 Feb 2024
20 Dec 2023
18 Jan 2024
20 Dec 2023
10 Jan 2024
28 Dec 2023
Amount
Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement, laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.
M&L 25 mm thick Cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floor/roof/hardstanding, finished even and smooth w/o using extra cement complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises
M&L Non skid coloured ceramic tiles area exc 0.06 sqm but not exc 0.11 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.
M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 300 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl.10 mm thick screed bed in CM 1:4.complete all as specified and as directed by Engineer-in-Charge.
Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.
M&L Coloured & digital Non skid ceramic tiles 7 to 8 mm thick area of each tile exeeding 0.18 sqm but not exe 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.over and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge (Make Johnson /Kajaria)
Ditto all as per item no 8 above but as in skirting/dado but over 10 mm thick rendering over CM 1:4
Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar
M & L for Granite (of any type) work 18 -20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding and machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engineer in Charge.
M&L for 18-20 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified.
M&L 18-20 mm thick single piece machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick cement plaster in cement and sand mortar 1:4 complete all as specified.
S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor .
M&L Vitreous china wash basin, white, flat back, size 580 x 440mm, including brackets and cutting for and pinning in ends of brackets, fixed in repairs including 32mm bore brass chromium plated waste fitting and 32mm bore PVC waste pipe of sufficient length complete.
S&F fency type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified.
S&F in replacement Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed.
S&F in repair fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F in repairs for 15 mm bore chromium plated concealed stop cock in half/full screwed down high pressure, with capstan head, screwed both ends for iron pipe or for union complete all as specified & directed.
S&F in repairs Brass chromium plated shower rose 125mm size with swivel joints, fixed in repairs complete.
S&F in repairs Soap dish, vitreous China white/CP, approximate size 160x 160x90mm all as directed by Engineer in Charge.
S&F in replacement stainless Steel plate Racks of size 600x 900mm complete all as specified and directed all as specified.
S & F in repair sinks made of stainless steel 1.0 mm thick kitchen sink with drainage board, plugs washers and waste coupling including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of MS angles and connecting union to 800 mm long PVC waste flexible pipe 40 mm dia, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.
S&F Waste fittings, 32mm bore, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete.
S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity.
S & F repair PVC connection 15 mm size PTMT nuts of length 450 mm complete all as specified & directed.
Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified.
S&F for 15 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified.
S&F for 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.
Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified. Notes :- (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured and ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete.
S & F stop valve cast copper alloy with crutch or butterfly handle scerwed both ends and crewed for iron pipe of 20 mm dia fixed in repair complete all as specified & directed.
S & F in repair gun metal glob or gate valve with iron wheel head , crewed for iron pipe of 20 mm dia fixed in repair complete all as specified & directed.
S&F PVC (SWR) vent cowl, 110mm bore complete.
S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.
S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats.
S&F Second class hard wood, glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fitted to chowkats
Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.
M&L preparation of new steel surfaces and applying two coats of synthetical enamel paid over a coat of red oxide.
Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail paneling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement all as specified.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S & F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate complete all as specified.
S&F Butt hinges extruded alumonium alloy with galvanised mild steel hinges pin anodisedand fixed ,type B-21 of 100mm.
S&F 150 mm size mild steel, stove enamelled black, pressed handles, oval type complete all as specified.
S&F 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked. complete all as specified.
S&F in repair mild steel 300mm ordinnary rat tail rod pattern springs including roller and roller plate.
S&F in repair curtain rod 25 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as directed by Engineer-in-Charge. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
S&F factory fabricated pressed steel frame/box windows, ventilators with glazed and fly proof shutters provided to size and dimension as specified & shown on drawing No BTD-888R Sheet No 1/5 to 5/5 & BTD-889 Sheet No 1/4 to 4/4 or as directed by GE with & including MS grills, MS fillets, pintol hinges, tower bolts, MS handles, peg stays, MS lugs, locking arrangement, dash through bolt where required, etc complete all as specified and as directed. Notes: -(i) PCC for filling in frames, glass, wire gauge and painting shall be measured & paid in separately under respective items. Provision of all other items as shown & specified on drawings shall deemed to be include in provision of cutting holes of suitable depth in walls for inserting lugs etc and making good dismantled portion in PCC 1:2:4 type B-0 using 12.5 mm graded stone crushed stone aggregate and CM (1:3)
Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified.
S&F 3mm thick Sheet glass , ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete.
S&F 4mm thick Figured glass, pin head type and glazing with beads (either supplied with shutters or to be measured separately as supply only) in squares not exceeding 0.5 Sqm in each pane complete.
Dismantling boarding in any description fixed in any position with nails/screw all as specified and as directed by Engineer-in-Charge.
S&F for 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including all hardware fittings (SS Auto hinges,SS designer handle, locking arrangement etc) as per direction and specifications.
Demolition of Brickwork , built in cement mortar including all quoins, arches, pillars etc,
M&L for brick work with old size Fly Ash bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M&L for brick work with subclass ‘B’ burnt bricks, old size straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work i.e. manholes.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified.
Demolition of lime concrete of any description over roof slab complete.
M&L for 10mm thick rendering (screeding) over roof slab in CM 1:4, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished fair & even, complete all as specified and as directed. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
M & L for cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 litre/sqm and provide a layer of APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick, reinforced with polyester non woven fabric (weighing not less than 150 gms/sqm) laid on primed surface complete all as described in Para 11.44.5 of SSR Part-I, complete all as specified and as directed. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps.
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L for 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified.
M& L for Flush pointing to 30cm by 15cm brick tiles, laid flat in pavings in 1:3 cement mortar complete all as specified and directed by Engineer in Charge.
Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edge including necessary form work complete.
Taking down/out loose & damaged concrete/cement plaster from soffits of ceilings, floor/roof slabs, vertical surfaces of columns, beams etc., including exposing and removing rust fron the reinforcement by rubbing with wire brush and removal of debris to a distance n. exc. 100 mtr and depositing where directed
M&L for cleaning existing reinforcement bars with wire brush/rotary wire brush making the surface free from cement skin, loose particle, dirt etc and applying rust remover (Rustoff 100 of Sika/ '8832GM' pidilite or equivelent of Fosroc/ Dr Fixit) on the rebars and removing the loose rust particles after minimum 24 hours by wire brush, all as per manufacture's instructions, complete all as specified and as directed.
S&F hard drawn steel wire fabric, weight not exc 4 Kg per sqm , cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9 mm in dia, supplied and fixed in reinforcement , complete all as specified and as directed.
M&L for cement based polymer modified anti corrosive rebar coating system ('Sika Top Armatec-108 " of Sika or equivalent of Dr. Fixit/ Fosroc) to existing reinforcement all as per manufacture 's instructions, complete all as specified and as directed. Note: Mode of measurment shall be affected surface area of column, beam, slab etc.
M&L for one layer of 20 mm thick concrete (comprises composition 1:2:1 plain cement concrete i.e. One part of cement (43 Gde OPC), two part of fine aggregate and one part of 10 mm and down size trap stone aggregate) mixed with 'Sprayset SL' of Fosroc( Equivalent to Sika / Dr Fixit) 2 to 2.5% by weight of cement and 12.5 to 16.5 liter of water mixed as per manufacture's instuctions and guniting by pressure nozzle with a delivery capacity of 2.5 Kg per sqm over column , beam, roof , slab, etc complete all as specified and as directed.
Dismantling strucural steel work including door gates and railings but excluding framed truss etc
Mild steel framed work as in grills, gates, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works conforming to Fe.290.Gde-E-165, complete all directed by Engineer-in-Charge.
M&L for 75 mm thick cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate in sub base of flooring/ hard standing all as specified.
Sand filling under floors or in any position including watering and consolidation for laying interlocking paver block all as specified.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment all as specified.
Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exceeding 1.5 m deep in foundations or for walls of manholes or Laying UG Cable /pole etc not exc 10 sqm on plan and not exceeding 1.5 m in depth and getting out complete all as specified and directed by Engineer-in-Charge.
Demolition and breaking up drain pipes, 150mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar.
M & L for concrete bed to drain pipe and including packing under haunching against the sides & pipe and after they laid and tested, in cement concrete 1:4:8 type D2 for 150 mm bore.
Supplying and laying of Reinforced concrete class NP2 pipes 150 mm dia laid and jointed complete with collars laid in trences or floors complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 Cm thick in soft/loose soil.
Removal of excavated soil to a distance n. exc 50M and deposited where directed at a level n. exc 1.5 M above the starting point.
Demolition of reinforced cement concrete cover slab for MH/Septic tank and removing the debris to a distance not exc 500 M as directed.
M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for MH/Spetic tank set in CM 1:6 including formwork complete all as specified and directed by Engineer in Charge.
M&L Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.
Dismantling of Cast iron or reinforced concrete or PVC (SWR) drain pipes of internal dia 100/75mm and less, jointed in cement mortar and taking out of trenches if required cemolition of cast iron / asbestos cement drain pipes in cement mortar complete all as specified and directed.
S & F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed, fixed to wall with necessary clamping.
S & F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed, fixed to wall.
M&L PVC (SWR) bends any radious 110 mm bore
M&L PVC (SWR) bends any radious 75 mm bore
S&F in repairs PVC (SWR) junction single, (single T) equal or unequal any radius, 110 mm bore complete.
S&F in repairs PVC (SWR) junction single, (single T) equal or unequal any radius, 75 mm bore complete.
M&L PVC (SWR) vent cowl 110mm bore
S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.
S&F stack clamps for 75mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.
S&F in repair PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement diametr of outlet 75mm
Treating and finishing the sunken portion of WC by providing 10mm thick rendering in CM 1:3 with and including water proofing compound and applying two coats of high performance acrylic/elastomeric cementitious flexible waterproofing coating (‘Pidifin 2K’ of ‘Dr Fixit’ or ‘Brushbond RFX’ of ‘Fosroc’) on plastered / concrete surfaces in sunken portion. Providing necessary connection items suitable for WC incl 40mm dia spout pipe. Providing lime concrete/40 mm graded stone/brick aggregate in sunken portion and 1mm thick multiplus plastfelt over 20mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate complete all as directed by Engineer in Charge.
Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed.
M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement)
M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.
M&L for complete removal of existing treatment on ceiling and applying three coats of white wash on walls all as specified and directed
M&L Rendering 15 mm thick cement plaster on concrete solid block/brick walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with liquid water proofing compound finished to even & smooth w/o using extra cement. Note :- liquid water proofing compound will be measured and paid seperately.
Supply only liquid water proofing compound
M & L for preparation of new surfaces of walls/ceiling incl pillar etc. and applying two coat of exterior emulsion/weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and as directed by GE.
M & L for preparation of old surfaces by complete removal of existing treatment of painted walls/ceiling incl pillar etc. by mechanical equipments like electric wall sander and applying two coat of exterior emulsion/weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and as directed by GE.
M&L rendering 15 mm thick in CM 1:6 on concrete solid block wall surface finished even and smooth without using extra cement.
M&L for preparation on newly plastered surface of wall for painting and applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper all as specified and directed by Engr-in-Charge.
M & L for preparing surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over 3mm thick wall care putty in two coats (smooth bodied opaque finish surface) on walls all as specified and directed by Engr-in-Charge
Demolition of existing RCC chajja of any size and description and S&F 25 mm to 30 mm sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stone, templates etc n exc 2m in length , punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 incl plastering all around in CM 1:4 completed all as specified.
M & L for preparation of old steel surfaces of any description area n. exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed.
M & L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified & directed.
M & L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.
Surface Excavation n. exc (not exceeding ) 30cm deep and averageing 15 cm deep and getting out complete all as specified.
Providing PCC 1:4:8 type D-2 (40mm graded agg) as in foundations filling , sub base and mass concrete all as specified.
M&L for brick work with Fly Ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 in half brick thick wall.
Form work to soffits of suspended slab such as roof slab not exc 200mm thick to rough finished surface of concrete
Form work to edges of conc. Flat floor and roofs n.exc 20cm wide to rough finished surface of concrete .
Reinforcement cement concrete design mix M-25 slab supported on wails beams and columns in floor roof landing and the like using 20mm graded stone agg.
Reinforcement cement concrete design mix M-25 as in Plinth Band/Lintle band and the like incl necessary form work the like using 20mm graded stone agg complete all as specified.
Mild steel bars upto TMT 8 mm dia cut to length bent to shape required incl. cranking bending spirally for hoop for columns ,hooking ends and binding with and including mild steel wire not less than 0.9mm dia deformed or twisted bars.
M&L for 25mm thick PCC type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified.
S&F steel ventilators top heng shutters incluking hinges, steel peg stays and one coat of zinc chromate primer complete all as specified.
S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified.
M&L for rendering 10mm thick in CM 1:6 finished even and smooth without usiing extra cement
S&F 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4
S&F 100mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4
S&F 50mm bore sand cast iron waste pipe any length with or without ears fixed to walls.
S&F 75mm bore sand cast iron waste pipe any length with or without ears laid in floor.
S&F100mm bore sand cast iron waste pipe any length with or without ears laid in floor.
S&F sand cast iron bends (any radius) 100mm bore dimnishing pieces or tapers (larger bore measured ) fitted with oval acess doors
S&F sand cast iron bends (any radius) 75mm bore dimnishing pieces or tapers (larger bore measured ) fitted with oval acess doors
S&F cast iron cowl 50 mm bore
S&F 100mm bore CI sand cast iron branch piece double (Equal or un equal) oridinary or inverted (spigot or socket type) with parallel branches
S&F Vitreous china wash down water closet Orrisa pattern shite of size 550x440 mm including integral foot rest excluding flushing cistern and flush pipe) incl P of S trap complete all as specified.
S&F Vitreous China urinal half stall type white including CP spreader , waste pipe etc. complete all as specified.
S&F PTMT glass shelf/corner shelf with and ans including chromium plate brass screws and wooden cleats complete all as specified and directed by Engineer-in-charge.
S&F 20mm bore brass valve high pressure with polythene float and flu nuts complete screwed for iron pipe.
M&L for hard core of gauge 63mm but n.exc 100mm deposited spread and leveled in layers ,watered and rolled/rammed to a true surface of broken stone or boulders complete all as specified.
Preparation of newly plastered surfaces of wall and applying two coats of cement based complete all as specified and directed by Engineer-in-charge.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregates as in bed to 150mm drain pipes incl packing under ande haunching against the sides of pipes after they are laid and tested for
S&F salt glazed stone ware drain pipe 150mm bore in trenches and jointed as specified.
M&L for extra for forming fair finshed drain or channel 30cm inner gifth in cement concrete, using extra cement incl forms moulds, miterd/stopped ends etc
M&L for construction of Septic Tank for 25 users, brick construction, complete, all as specified and shown on drawings (BTD-016 Sheet No. 1/3 to 3/3).
M&L for construction of Soak Well for 25 users, brick masonry, complete, all as specified and shown on drawings (BTD-830 Sheet No. 1/1).
Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified.
Supply, laying and jointing GI tubes, medium grade40mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches/wall complete all as specified and directed by Engr-in-charge
Supply, laying and jointing GI tubes, medium grade 25mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches/wall complete all as specified and directed by Engr-in-charge
Supply, laying and jointing GI tubes, medium grade 20mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches complete all as specified and directed by Engr-in-charge.
Cutting existing steel tubing for alterations or additions done in position without taking down for 10mm to 40 dia pipe (Each cut measured)
S&F Gun metal gate valve 40 mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed for the following sizes-
S&F Gun metal gate valve 25mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed for the following sizes-
Materal and labour for construction of brick masonary valve pit chamber of size 900x900x600 mm (Internal dimension) using sub class ,B, bricks complete, earth work, PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, brick masonary sub class bricks 23 cm build n cement mortar and below ground level PCC with 1:2:4 type B2 using 20mm grade stone aggregate, copng 50 mm thick including frame of size 75x75x6mm made of angles iron and chamber cover made of MS sheet of 4 mm thickness double leaf including MS hinges locking arrangement with provision of locks and keys, painting of the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation, returning & filling & removing of surplus soil etc complete all as specified and as dircted by Engineer in Charge.
Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.
Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.
Taking down old U/S existing DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE
(b)One pin 5 amps socket point on the same board with other switches complete
(c) One 3 pin 5 amps socket on independent board.
Ditto all as per item No 170 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
Ditto all as per item No 170 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 4.0 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.
supply and fixing Bell push, modular type, 6 amp, 1 module, 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-In-Charge.
S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.
Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
Taking down fan,sealing cable end,dismantling blades of any make, any sweep, and deposited to MES store .
Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and as directed. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.
supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm
Taking down Geyser of any capacity from wall and deposited to store complete all as specified and directed by Engineer-in-Charge.
S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete.
S&F sheet metal enclosure MCB DB, double door, vertical TPN 4 way with 200 Amps rated busbar all as specified and as directed.
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S&F MCCB 63 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.
S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted by Engr-in-charge.
Taking dowen and refixing tamper proof energy meter electronic type single phase 10-60 Amps current rating single phase 230V AC with electric connection and necessary fixing arrangement complete all as specified and directed.
M&L for submain wiring with 2 runs of 6.0 Sqmm (nominal area) size main cable & 1 runs of 6.0 Sqmm size earth continuity conductor single core PVC insulated unsheathed FRLSH multistranded copper conductor 1100 volt grade ISI marked cable drawn through & including suitable size of heavy duty non metalic rigid PVC concealed conduit ISI marked & conduit fittings/accessories, fixede concealed in wall/ceiling including dismantling & taking down old unserviceable sub main wiring complete all as specified & directed. Note :-(i) 02 runs of 6.0 Sqmm size main cable, 01 run of 6.0 Sqmm size earth continuity conductor cable & Conduit with accessories shall be measured as one run length for payment purpose.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.
M & L for earthing complete with GI Earth Plate Electrode 600mm x 600mm x6mm, thick buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to Galvanised iron earth strip 32X6 mm drawn through and including Galvanised Iron protection Pipe 40 mm bore (dia) Light grade upto heightl of the transformer foundation where foundation situated by means of Bolts, Nuts, Check Nuts and Washers etc Earth plate surrounded by a packed thickness of charcoal or coke dust mixed with common salt in alternate layers of not exc 150mm thick PCC Pit in cement concrete 1:3:6 (20 mm graded aggregrate ), Precast RCC 1:2:4 (20mm graded aggregrate ) cover slab 350 x350 x 50mm thick reinforced with and including 8mm dia TMT Bars @ 10 cm Centre to Centre both ways GI Wire Mesh , Funnel, with GI Watering Pipe 20mm bore dia Medium grade necessary excavation in soft loose soil returning filling in and removal of surplus soil upto a distance of 50 METRE and all as shown in Electrical Plate No. 3 of MES schedule Part- I and testing on completion complete all as specified and as directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.
Supply and laying un-reinforce precast concrete cable cover, class LV type-1 with peak, size 250 mm X150 mmx 40mm for protection of ht cable
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25sq mm 4 core complete all as specified and directed. Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.
Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 3.5 core x 50 Sqmm complete all as specifed and as directed. Make : Polycab/KEI/Havells Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.
Supply and fixing GI Pipe light grade of size 40 mm bore with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed .Make :- jindal/bansal/Tata
Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregates as in foundation for stays complete all as specified and as directed by Engineer-in-Charge.
Supply & Laying, testing & commissioning of LT UG cable XLPE sheathed PVC insulated,screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in trenches, in GI pipe , including brass cable glands, clamps etc of size 4 core x 10sqmm complete all as specified.Make :- Polycab/Havells/KEI Note : Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and paid under appropriate items
Supply & Laying, testing & commissioning of LT UG cable XLPE sheathed PVC insulated,screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in trenches, in GI pipe , including brass cable glands, clamps etc of size 3.5 core x 70 sq mm complete all as specified.Make :- Polycab/Havells/KEI Note : Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and paid under appropriate items
Cable indoor / outdoor end terminals jointing kit for LV/LT 1100 V cable heat shrinkable type joint kit complete with jointing material and accessories, thimbles etc suitable for 70 Sqmm to 150 Sqmm 3.5 core XLPE armoured aluminium conductor cable including testing after jointing, fixing in replacement complete all as specified as directed by Engineer-in-Charge.
Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of red oxide Primer (Externally from Top of Coping)and applying Two Coats of Synthetic Enamel Painting in alternate Yellow & Black Strips Painting (4 No. Each Strip 300 mm wide) and also including numbering to poles with synthetic enamel paint on black base of size 15 cm x 10 cm and numbering in 8 cm height of number with white paint complete all as specified and as directed. Note : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.
S & F Junction Box fof size 205x255x112 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 66 with integrated membranes/metric knockouts for cable entry with cable glands, protection and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 04 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on tubular/PCC pole with suitableclamps, nuts, bolts including removal of exiting unsv all as specified and directed. Make;- hansel/Syntex
Suppy and Fixing LED based street light, housing made up of LM6 pressure die cast aluminium alloy with aerodynamically designed for all weather conditions with excellent thermal management, toughned glass and high power LED's with seconday optics and IP66 protection, sturdiness. The fixture should have a minimum system efficiency of more than 110/120 lumen/watt and a minimum system lumen output of not less than 6600 lumens and maximum system wattage 60 Watts. The fixture shall have a correlated colour temperature of al least 5700K and CRI minimum 70. The fixture shall be designed for a system life of 50,000 hours @ 70% lumen maintenance ingress protection of IP66 (lamp and gear compartment and mechanical inpact resistance raiting of IK>=08. The fixture driver should have an operating voltage range of 140-270 V & potted type for humming free operation, driver should be withstand up to 440v for 8hrs, two surge proection, one 4KV on driver internal and one 10 KV external surge protection, PF>0.95 and THD<10% and have double phase protection. LED light fitting should be suitable for ambient temperature from (-) 10C to (+) 50 C. The fixture should comply with the parameters IEC 60598 and LED should comply to IEC 61000-3-2 ed. 3.2 per harmonics IEC 61347-2-3,2006 in configuration with IEC 61347-1 ed 2.0,2007 for electrical safety LM 79 and for LED LM 80 test report needs to be submitted from the house NABL accreditation laboratory. Make CG Catpart No.CRP-409-60-57-SL-GL-NSG or equivalent make of Philips/Wipro
Supply and installation servo control automatic Voltage stabilizer for automatic operation, three phase naturally oil cooled indoor type & designed for input variation between 340 V to 460 V with output voltage stabilized at 415 with accuracy ±1% and speed of correction 50 Volts per second and of capacity 50 KVA, complete all as specified and directed by engr-in-charge. Make Vintek Electronic (Volina) /Indian transformers and electric /Electrifield Company.
Supply,installing, testing and commissioning out door type control panel made out of 3.15 mm thick CRCA sheet with top canopy with locking arrangements of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side , having proper locking arrangement in both front and rear door and painted with powder coating paint and suitable for 415 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form all round the panel board complete with the following items housed in :- Notes for serial item No.18 :- (i) Vertical height of legs of LT panel base frame shall be not less than 45 cm from top of nearest road level / PCC floor finish. Legs shall be grouted in PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate). (ii) The contractor shall produce and get the detailed drawings of LT Panel approved from GE before fabrication and placing the order to the approved manufacturer. (iii) The quoted rate shall deemed to include supply & provision of built in flush type locks (with 02 keys) of superior quality as directed by Engineer in Charge. (iv) MS frame work shall be painted with two coats of synthetic enamel paint of approved tint over a coat of red oxide primer. (v) Cost of MS frame work, painting, platform, MCCB spreaders, cable glands, locking arrangement with lock and key and any minor addition/alteration where required at site (the decision of GE will be final and binding regarding extent to which the change can be considered as minor addition/alteration) shall be deemed to be included in the quoted rates. (a) 150 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code (B) Incoming MCCB 4 Pole 100 Amps, thermal magnetic type breaking capacity 25 KA with thermal magnetic release at 415 volts - 01 Nos (C ) Change over 04 pole , 415 Volts, 100 Amps - 01 Nos (D) Outgoing MCCB 4 Pole 63 Amps, thermal magnetic type breaking capacity 25 KA with thermal magnetic release at 415 volts - 2 Nos (E) Outgoing MCB 4 Pole 32 Amps, thermal magnetic type breaking capacity 10 KA with thermal magnetic release at 415 volts - 03 nos (F) Three Phase Voltmeter CI 0.5 Input voltage measurement range 50-520 - 01 Nos (G) Three phase Ammeter CI 0.5 with CT copper wound CT Coil - 01 Nos H) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 01 set
Supply & fixing FRLS PVC insulated Copper conductor, two single core of size 1.5sqmm complete for terminal box to street/ flood light fitting.
Supplying and fixing of automatic street light switch using infrared sensor based Nture Switch, 08 kw equally distributed, 63 Amps,1-pole, Model - Swadeep-02 EC 8 Kw1P for automatic switching of street lights based on LUX level of natural light . The sensor(Nature switch ) along with suitable power contactor rating 63 Amps 2- pole & 40 Amps 2-pole, MCB SP 63 Amps -02 nos and support terminals should be enclosed in pole/wall mountable enclosure made of rust proof ,electric shock proof, termite proof and FR grade SMC Junction box (Sintex make) confirming to IP54.The contactor suitable to 1- phase load of 08 kw , rating 63 amps 2 pole, MCB rating 63 amps SP 01 NOS
Supply and fixing GI Pipe light grade of size 40 mm bore with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed .Make :- jindal/bansal/Tata
Supply & Fixing shadow less O.T Light Ceiling Mounted 5 in 1 + 5 in 1 Slim Double Dome LED OT Light fitting complete with Emergency Power Unit and Battery Back Up for Min 30 Minute (3KVA) The Unit to be Suitable for operation on 230V Single Phase 50 Cycles Main Supply for Majour OT Techanical Specification (i) Aerodynamically Designed Aluminium Dome for Modern Laminar flow OTs.(ii) Sterilizable Handle for Focusing (iii) Drift Free spring rotation of 360° (iv) Dome Diameter : 630mm + 630mm (v)Field -145mm-280mm (vi) Higher Field depth of 750 for proper vision in deep cavity (vii) Colour Temperature-4100K (viii) Intensity Control in the Dome Head/SMPS (ix) Focus adjustable (x) Two St. Handles autoclavable for each dome (xi) No of HI LEDs-35+35 Nos (PHILIPS LUMINATED USA) (xii) High Output of 135000 + 135000 Lux (xiii) SMPS -2Nos (xiv) with Intensity control-stepless control facilities. (xiv) Ceiling Mounted Double Dome Shadow less LED Operation Theatre Light Model : PHILILED S50 DUO (xv) Slim 5 in 1 + 5 in 1 Double Dome (xvi) Each Dome with 5 LED clustures (xvii)Each Individual LED can be replaced (xviii) Slim Domes suitable for modern laminar flow OTs (xix) Ceiling arm Movable 360° (xx) Focus adjustable by handle (xxi) CRI 90 (xiv) Intensity control for Lux Intensity variation (stepless) (xxii) SMPS with Intensity control facilities (xxiii)Input Voltage 180-270 V AC 50Hz (xxiv) LED Life Greater than equal to 50000 Hrs
Supply, installation, fixing and commissioning of tower AC ype air conditioner of capacity 2TR, BEE & minimum 5 star rated, LCD display on unit ,with cordless remote control unit and inbuilt air ioniser, plasma filter for better indoor air quality, Noise level indoor 52db, antibactrial function, suitable for floor mounted three phase430/450 volt AC including breaking necessary for fixing and making good to distrubed surfaces with cement morter to match with existing colour after commissioning, all as required including necessary connection complete.
Supply and fixing Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32amp
supply and fixing isolater suitable for 40 Amps, 440 Volt AC supply 3 pole and neutral complete all as specified and as directed by Engineer-in-Charge. Make :- Legrand/ GE/ Seimens/L&T/Indo Asian/C&S/ABB/BCH /Havells
M&L for submain wiring using 4 runs of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4runs of 10 Sqmm of voltage rating 1100V for three phase & neutral, drawn in and including concealed PVC conduit of dia not less than 25 mm dia with standard acessories, along with two run of FRLS PVC insulated, unsheathed, stranded copper conductor of size 2x 6.0 Sqmm as earth continuity conductor all as specified and directed(Note-4 runs of single core FRLS PVC cable 10sqmm for three phase & neutral with Two run of earth conductor as earth and conduit shall be measured as one unit)
B K CONTRACTORS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .